Search:

Type: Posts; User: xeromist

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    1
    Views
    45

    You can always find this information on the main...

    You can always find this information on the main manufacturer site. Find your model, go to support, go to CPU support. Find the CPU model. In your case that CPU is validated since 1803 or later....
  2. I'd check what channel you're on and cross...

    I'd check what channel you're on and cross reference that with info on the Honeywell as to whether it can reach that channel. Not all devices can actually use all channels so I've had similar issues...
  3. As low as possible while remaining stable with...

    As low as possible while remaining stable with something like HCI memtest. Higher voltage beyond what is necessary to maintain stability doesn't do anything except generate more heat. The only reason...
  4. Replies
    3
    Views
    93

    If you are still within the warranty period (and...

    If you are still within the warranty period (and it sounds like you are) I would send it in for RMA. There's no way to tell from the outside if it's a poorly seated cable, damaged cable, or something...
  5. Replies
    2
    Views
    44

    Der8auer on Youtube did some Chia testing on SSD...

    Der8auer on Youtube did some Chia testing on SSD wear levels. You might want to check out his video before planning your build. Based on his findings I wouldn't recommend RAID 0. The higher...
  6. The video that was linked (in the other thread?)...

    The video that was linked (in the other thread?) indicated that they got dual channel performance installing only two on the back. That would indicate that there is one slot from each of the two...
  7. Installing an oversized DIMM would not hurt the...

    Installing an oversized DIMM would not hurt the machine. The worst case is it just wouldn't work. That said, usually the "limit" is because that's what has been tested, not because there's any actual...
  8. What you described might work, I just don't know....

    What you described might work, I just don't know. If you decide to try it please post the results here for others.
  9. A USB stick must be specially formatted to be...

    A USB stick must be specially formatted to be bootable. There are guides online as to how to do this.

    But these days I just run HCI Memtest in Windows. Much easier.
  10. First check HWINFO before you buy anything. If it...

    First check HWINFO before you buy anything. If it says you're in dual channel then you have 2x8GB vs 1x16GB. Even if other people may have had 1x16 that can change over time so double check your...
  11. If a board comes with a block and you remove it...

    If a board comes with a block and you remove it then you would need to replace it with heatsinks and perhaps add a fan. Look at similar air cooled boards for an example.

    The best place to find an...
  12. You can try setting the hard drive not to turn...

    You can try setting the hard drive not to turn off (0 minutes). This has helped me.
    88660
  13. I mainly suggested that because in many regions...

    I mainly suggested that because in many regions there is limited time to make an exchange with the retailer, which is generally easier than RMA with the manufacturer. You still might want to contact...
  14. You might check if switching the monitors...

    You might check if switching the monitors connections makes a difference. Is it the one connected as the 3rd or is it this specific monitor?
  15. Booting to Windows doesn't mean stable and you...

    Booting to Windows doesn't mean stable and you might even get some stuff to run but have weird unexplained problems in the future. I'm telling you how to be sure but it's up to you. I always test...
  16. That's not the case. When you look at older...

    That's not the case. When you look at older switches they had a dedicated uplink port for that reason. Newer switches auto-negotiate so you can use any port and it doesn't matter if you use standard...
  17. Replies
    3
    Views
    126

    Does the brightness level have any impact? If so...

    Does the brightness level have any impact? If so then it could be the backlight driver circuit.
  18. After setting your RAM you should run HCI...

    After setting your RAM you should run HCI Memtest. Even if you can boot to Windows it may not be stable. If it's not stable you might need to try a different docp profile or manually tune your memory...
  19. I'm not actually sure how the license works. I...

    I'm not actually sure how the license works. I know I read something but it may have only applied to certain hardware that was "Ready" and just needed a license key. Sorry, wish I knew more.
    ...
  20. Does the audio control panel show DD or DTS? They...

    Does the audio control panel show DD or DTS? They are licensed technologies so not all motherboards have them as it would increase the price. If it didn't come with your board I believe you may be...
  21. This is a very old thread. If there was a line of...

    This is a very old thread. If there was a line of SSDs causing damage they will no longer be made by now so you have nothing to worry about.
  22. None of the above is necessary anymore. Microsoft...

    None of the above is necessary anymore. Microsoft fingerprints the hardware of Windows 10 machines for licensing. Just follow Microsoft's instructions on creating a Win 10 Home installation drive...
  23. Those aren't Thunderbolt ports, just USB-C. So...

    Those aren't Thunderbolt ports, just USB-C. So you would need USB-C DP adapters. I'm not sure without further research whether there is a USB-C HDMI adapter that would work with the native DP output...
  24. I'd try a complete shutdown once it is warmed up...

    I'd try a complete shutdown once it is warmed up and then immediately start it back up. If that works correctly like a restart does then that might point to something temperature related. Another...
  25. I just thought of something. Does your tester...

    I just thought of something. Does your tester tell you if the connection is standard or crossover? I believe most modern network devices don't really care and can negotiate either but maybe the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4