Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. For Haswell E I'd try the last of the 2XXX BIOSes

    For Haswell E I'd try the last of the 2XXX BIOSes
  2. You can try to set DOCP profile in BIOS.. ...

    You can try to set DOCP profile in BIOS..

    However 3600 is pushing it for a lot of ryzen memory controlers so you may need to tweak dram voltage and/or soc voltage.

    Or try 3200 and tighten...
  3. If you want to see timings in OS use...

    If you want to see timings in OS use memtweakit...or ASRock do a similar program...
  4. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    324

    OK...let me know how it goes...for sure you want...

    OK...let me know how it goes...for sure you want to try everything....these boards aren't cheap!
  5. I'd check the GSkill RAM configirator for the MB...

    I'd check the GSkill RAM configirator for the MB
    ...
  6. Depends.... Look up interleaving.. Also T...

    Depends....

    Look up interleaving..

    Also T topology boards will run 4 sticks better often...
  7. You will need the antenna...and a driver I presume

    You will need the antenna...and a driver I presume
  8. I would go for the Maximus XI Extreme as the...

    I would go for the Maximus XI Extreme as the premium build option for the 9900KS....top of the line...as you are used to that level of features...quality etc.
  9. The ideal is to always have more memory available...

    The ideal is to always have more memory available than is being used by your applications...so I'm happy to say that looks OK...you don't want to be in a situation where you are pushing the limits of...
  10. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    324

    It's worth a try...more than once I've seen kits...

    It's worth a try...more than once I've seen kits that dont work at stock default settings...but do fine when XMP is set...or setup manually to rated frequency and voltage...
  11. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    324

    Yeah...you have to be methodical to eliminate...

    Yeah...you have to be methodical to eliminate possibilities...

    Try the other board...if behaviour is the same it's more likely tje CPU...

    When you set up in recommended slots...are you applying...
  12. 9900KS is lga 1551...the omega is lga2066 Make...

    9900KS is lga 1551...the omega is lga2066

    Make sure you select parts that go together....check QVL of MB you choose for RAM etc.
  13. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    324

    You said you swapped MB right...same problem...

    You said you swapped MB right...same problem persists?

    That makes me think CPU memory controller might be a problem or CPU socket contact is bad...
  14. Replies
    6
    Views
    122

    Maybe disconnect all power from the...

    Maybe disconnect all power from the board...battery too...then reseat CPU...clean RAM slots etc.

    Nice to hear someone benching Spi
  15. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    324

    Same CPU on those boards? Have you tried a bit...

    Same CPU on those boards?

    Have you tried a bit more voltage for dram and vccsa...what is the board applying at stock and at xmp?

    The kit in my specs worked great on that board and with my...
  16. Check out a site called Puget Systems...they do...

    Check out a site called Puget Systems...they do extensive reviews of systems and running different video software...you might get a clue for your particular use case...

    Often less cores at higher...
  17. Replies
    6
    Views
    122

    Have you got a different PSU to test...and have...

    Have you got a different PSU to test...and have you disconnected everything to bare bones for troubleshooting...

    The steps you list do point to the MB so far
  18. All core OCs are generally lower than single core...

    All core OCs are generally lower than single core boost clocks.
    Expect 4.1...4.2GHz and you wont be disappointed.

    You will want excellent cooling for sustained loads at those speeds on so many...
  19. Sweet! Common misconception the boot...

    Sweet!

    Common misconception the boot time...will not change...loading times for everything else will!
  20. Nice :cool:

    Nice
    :cool:
  21. If I were you I'd set F5 defaults in BIOS and...

    If I were you I'd set F5 defaults in BIOS and check temps....then set RAM to rated speed....maybe do this manually instead of using DOCP profile...if that is causing weird temp behaviour.
  22. I would return the RAM and get a single kit of...

    I would return the RAM and get a single kit of the size you want...preferably on the QVL for the board...
  23. Have you overclocked the CPU Threadripper can...

    Have you overclocked the CPU

    Threadripper can run hottish at idle with some oc settings...but that sounds too hot even for those circumstances.

    Is the tubing on CPU block warm or hot? If so...
  24. The correct file name will be ZEA.CAP for BIOS...

    The correct file name will be ZEA.CAP for BIOS flashback

    Also...try this on the USB drive before placing correctly named file only on there......
  25. Replies
    4
    Views
    223

    Specs seem to be up fine on the left... ...

    Specs seem to be up fine on the left...

    OP...maybe have a good read of this...
    https://rog.asus.com/forum/showthread.php?106375-MCE-explanations-and-others

    Also bear in mind adaptive only...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4