Search:

Type: Posts; User: BlackSteel

Search: Search took 0.00 seconds.

  1. Just wanted to say, 980ti fixed this problem...

    Just wanted to say,

    980ti fixed this problem for me.
  2. There is my problem right there. My OS is...

    There is my problem right there.

    My OS is Win7x64 which i did not install in UEFI mode, guess its time for another reinstall.

    Thanks Prime for the info.
  3. My CSM is already set to "Auto" I found if i set...

    My CSM is already set to "Auto"
    I found if i set it to disabled then the monitor shows the post while my TV is still attached to the GC, although i get a message right after post saying boot device...
  4. Hi all, I am experiencing the same issue...

    Hi all,

    I am experiencing the same issue however....

    PG278Q
    Build date January 2015

    -: When i unplug my TV (Hdmi) From the back of the graphics card the ROG swift displays Post/Bios as it...
  5. Okay here is the end result. I installed a...

    Okay here is the end result.

    I installed a fresh copy of windows on a WD green HDD and installed all the important updates untill there was no more (including the most important in this case...
  6. even if i instal the 306 driver from windows...

    even if i instal the 306 driver from windows update upon re-boot i still get this black screen on boot up (welcome screen)
  7. Could you please explain how you have installed 2...

    Could you please explain how you have installed 2 nvidia drivers..?

    When you done all the windows updates did you install the nvidia 306 driver from windows update, and then you installed over...
  8. Im still working on it, will update tomorrow once...

    Im still working on it, will update tomorrow once ive tried the things i state below.

    I have another PSU which im going to try and a diffrent win7 x64 installation disc, Am also going to install a...
  9. Thanks for the suggestion, the primary display i...

    Thanks for the suggestion, the primary display i have already set to PCIe as for the link speed ive tried Gen1 and Gen2 (currently this value is set to Auto but will try it on Gen2 again with the...
  10. The msi Mpower board arrived today after hours of...

    The msi Mpower board arrived today after hours of removing and fitting the msi board followed by a fresh win 7 64bit installation, i installed the chipset drivers for the board then the video driver....
  11. I am going to RMA the motherboard back to the...

    I am going to RMA the motherboard back to the suppliar unless anyone has other suggestions, Is it possible after all i have described about this issue is hardware related.

    What do you guys think??
  12. Replies
    15
    Views
    9,311

    Once you replace it, i would state to pay close...

    Once you replace it, i would state to pay close attention to seating the cpu into the motherboard, prior to this check using a magnifying glass all the pins on the motherboard to be 100% sure you...
  13. Replies
    5
    Views
    2,615

    I also agree on that point.

    I also agree on that point.
  14. Ive tried the second PCIE slot... still the same...

    Ive tried the second PCIE slot... still the same problem (black screen at welcome screen) the 3rd PCIE slot is for a single ati card... tried that too anyway.... no display at all on 3rd slot with...
  15. Replies
    6
    Views
    4,003

    Is there another Video card you could try??...

    Is there another Video card you could try?? friends maybe...

    My two cents is that its the board at fault as i too have got an issue with my v formula/TFX
    Read my post if you like...

    RMA...
  16. Replies
    26
    Views
    85,040

    The Thunder FX mic is to say the least very poor...

    The Thunder FX mic is to say the least very poor in regards to funtionality.. what use is a break out box with mic inputs but struggles to transmit youre voice even at full mic volume, i regret...
  17. Replies
    5
    Views
    2,615

    I would only use the rog flashback port only if...

    I would only use the rog flashback port only if you cant post at all and need to re-flash the bios...

    I would recommend you use EZ Flash 2 within the bios to flash to new or older bios's, make...
  18. Replies
    15
    Views
    9,311

    Clear the cmos by the switch and take the battery...

    Clear the cmos by the switch and take the battery out the motherboard too...

    You might want to connect a laptop to the rog port and moniter what state is shown on the RC Poster

    Also try...
  19. Maximus v Formula/Thunder FX Black screen winlogin after Nvidia driver Installation

    Hi everyone,

    My specs are:-
    Windows 7 64bit
    Core i5 2500k @4.5GHz @1.28v OC using offset voltage
    Maximus v Formula/Thunder FX (currently on 1309 bios)
    MSI 680gtx 2gb lightning (f7-f8 Ln2...
Results 1 to 19 of 19