Search:

Type: Posts; User: Arne Saknussemm

Search: Search took 0.02 seconds.

  1. I used CPUz on X99 it served me well...whatever...

    I used CPUz on X99 it served me well...whatever it was reading...
  2. There are points on the board for accurate...

    There are points on the board for accurate readings if you have a multi-meter...but software is usually adequate...it's not a million miles from the truth...as long as you only use one program for...
  3. No, it requires no value...just leave it as it is

    No, it requires no value...just leave it as it is
  4. I'm on a Threadripper system at the minute...but...

    I'm on a Threadripper system at the minute...but yes, on Intel rigs I ran adaptive on 100BCLK...allows for speedstep and only applies voltage to turbo ratios.

    Just type voltage you require into...
  5. Things will change...you'll have to do some...

    Things will change...you'll have to do some playing to see what voltage you need etc.

    But yes, some CPUs do
  6. Nice one on the BIOS fix! That is...

    Nice one on the BIOS fix!

    That is normal...irritating to the OCD like me...but normal:o
  7. Looks good to me! Good job! Hope ASUS get on...

    Looks good to me! Good job!

    Hope ASUS get on with it and patch your BIOS, so you can experiment further if the fancy takes you...
  8. OK nice one! The problem is, as always, that...

    OK nice one!

    The problem is, as always, that each CPU and system in general is unique...so our recommendations are necessarily based on what worked for us...might work for you...but might not :o
    ...
  9. It was always a good idea to use 100 BCLK and...

    It was always a good idea to use 100 BCLK and avoid 1.25 strap so that speedstep worked....that, among others might be why lots of people recommend trying 100BCLK

    If you ask people for advice you...
Results 1 to 9 of 9