Search:

Type: Posts; User: Arne Saknussemm

Page 3 of 20 1 2 3 4 5 6

Search: Search took 0.09 seconds; generated 44212 minute(s) ago.

  1. All the Qconnectors are the same...same pin-out...

    All the Qconnectors are the same...same pin-out on all MBs.

    Here's a diagram...
    86079

    General rule of thumb...connect connectors with writing side down and they'll be right orientation +/-...
  2. Exactly that....boot time has almost nothing to...

    Exactly that....boot time has almost nothing to do with your drive specs.

    It depends much more on platform...RAM density...training...driver initializations...windows fast startup setting...etc etc
  3. Boot time is almost entirely unaffected by your...

    Boot time is almost entirely unaffected by your boot drive...
  4. Yeah...looks the same thing to me...should be fine

    Yeah...looks the same thing to me...should be fine
  5. If you are careful, there should be no need to...

    If you are careful, there should be no need to replace the thermal pad.

    If something goes wrong......
  6. If I were you I'd download a fresh copy of the...

    If I were you I'd download a fresh copy of the previous BIOS...1401...use BIOS flashback method to flash that and not bother with later BIOS
  7. Get something like a GT710

    Get something like a GT710
  8. Try manual 1.36v LLC4 Adaptive uses VID and...

    Try manual 1.36v LLC4

    Adaptive uses VID and your offset will add voltage to an already high vid
  9. Page 1-12 of the manual has all you need to know...

    Page 1-12 of the manual has all you need to know to make a decision...the info there is more pertinent to making a choice than temps....temps should not be an issue anywhere with adequate cooling
    ...
  10. Replies
    3
    Views
    278

    https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview
  11. 1.5 is kind of the limit....tune SA and IO volts...

    1.5 is kind of the limit....tune SA and IO volts for stability too....maybe less VDIMM needed if you tune those rails. However for 24/7 use running any frequency or timings that need that voltage is...
  12. 4.2 all core usually gives semi decent temps on...

    4.2 all core usually gives semi decent temps on AIO...but really for most things they are better left at stock with PBO settings maxed out and the CPU will cycle the cores at higher boost speeds.
    ...
  13. Replies
    2
    Views
    616

    Cheers for the heads up... No real performance...

    Cheers for the heads up...

    No real performance boost that I can see....yet
  14. Yeah that bloke is a looney :o ...

    Yeah that bloke is a looney :o

    Anyway...someone else to listen to

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview
  15. Dont

    Dont
  16. Do you have the slow mode switch on? Strange...

    Do you have the slow mode switch on? Strange power plan settings?
  17. The CPU will throttle if it is too hot. And you...

    The CPU will throttle if it is too hot. And you have a small amount of thermal capacity in the block and water will move by convection slightly....so....all in all you should be OK if it was a short...
  18. :D Zka17 Just to add...t topology boards with...

    :D Zka17

    Just to add...t topology boards with 4 slots often run best with 4 sticks...4x8 instead of 2x16
  19. In Boot settings menu there is a delay timer in...

    In Boot settings menu there is a delay timer in seconds...often set to 3 seconds default....change that to 0?
  20. Try 1.36v for vcore at LLC5 for 5.1GHz and try...

    Try 1.36v for vcore at LLC5 for 5.1GHz and try 1.05v VCCIO and 1.1v VCCSA for the RAM.....you can also try....say....1.365v vor DRAM voltage

    Make sure long and short duration power package limit...
  21. Are there any updates on timeframe for this fix?...

    Are there any updates on timeframe for this fix?

    Thanks
  22. Replies
    381
    Views
    55,308

    Yes perfectly normal...as long as it doesn't hang...

    Yes perfectly normal...as long as it doesn't hang there for long ;)
  23. RealBench and Karhu RAMTest will reach the parts...

    RealBench and Karhu RAMTest will reach the parts other stress tests cannot reach...and quicker, without current degrading your CPU
  24. Just use BIOS flashback method to 1402....1502...

    Just use BIOS flashback method to 1402....1502 has many RAM kit problems...
  25. Replies
    381
    Views
    55,308

    AFAIK this is a known issue with armoury crate...

    AFAIK this is a known issue with armoury crate and is waiting a fix in the new version which is supposed to drop "soon"
Results 51 to 75 of 499
Page 3 of 20 1 2 3 4 5 6