Search:

Type: Posts; User: Arne Saknussemm

Page 2 of 20 1 2 3 4 5

Search: Search took 0.09 seconds; generated 44989 minute(s) ago.

  1. Replies
    3
    Views
    144

    That is normal...it shows OC when you OC :)

    That is normal...it shows OC when you OC :)
  2. Replies
    1
    Views
    189

    No, it wont..that is a x8 slot x16 x8 x16 x8

    No, it wont..that is a x8 slot

    x16
    x8
    x16
    x8
  3. Replies
    1
    Views
    4,564

    I haven't seen the Strix yet....not sure what...

    I haven't seen the Strix yet....not sure what concrete difference there is...maybe some components....power delivery etc.

    I have seen the TUF and thought it was a very good card....ran cool and...
  4. Unfortunately no....you need to buy a single kit...

    Unfortunately no....you need to buy a single kit of RAM that your motherboard can support (CPU too).

    Have a look for the QVL for the board etc.
  5. Sounds like fans are maybe plugged into the wrong...

    Sounds like fans are maybe plugged into the wrong place...controller? that is not turning off because ERP is not on?

    Or some other dodgy power problem...the fans and the soundwave...?

    Maybe...
  6. Not a bad card...just a regular one...

    Not a bad card...just a regular one...
  7. Replies
    4
    Views
    583

    That kind of depends on what resolution you are...

    That kind of depends on what resolution you are gaming at but in practical terms...no, not much
  8. Replies
    8
    Views
    344

    MAybe replace the BIOS battery on the board.....

    MAybe replace the BIOS battery on the board.....
  9. Replies
    1
    Views
    139

    Check your manual for this...there will be a CPU...

    Check your manual for this...there will be a CPU fan header on the board that seems not to be plugged to anything.

    Maybe that the Kraken fans are running from a different header...or from molex or...
  10. Replies
    4
    Views
    583

    That's stil a very capable system...the 3080 will...

    That's stil a very capable system...the 3080 will deliver a bit more than those two cards can deliver on the one card...avoiding many dual card issues...where SLI does not work it will deliver more...
  11. Hmmm...well I've seen a lot of probs with these...

    Hmmm...well I've seen a lot of probs with these kits...

    You could try one stick at a time and see if one of them is dodgy....assuming they are OK...
    You can try raising DRAM voltage..1.375 even...
  12. Have you set XMP? (DOCP) Maybe set DRAM...

    Have you set XMP? (DOCP)

    Maybe set DRAM voltage to 1.35 (or try 1.365) manually...set 1.1v SOC
  13. These CPUs have a very robust IMC...3600 C18 at...

    These CPUs have a very robust IMC...3600 C18 at that density should be no problem from what I have seen..

    Fan control is a breeze...

    The chipset fan and VRM fans have never spun up on any of...
  14. I would get a MXIIFormula and some 3600Mhz RAM...

    I would get a MXIIFormula and some 3600Mhz RAM with fast timings...like C14 stuff...
  15. Yeah sounds like the best option will be to do a...

    Yeah sounds like the best option will be to do a clean install on your new drive of W10 and then you'll have access to your other drive from there....
  16. No credit needed. If you are trying to...

    No credit needed.

    If you are trying to transfer an OS I would just do it and see if it boots up...and then I'd do what you need to do hoping Windows can use what it has built in to cope...
    ...
  17. No need to overthink this... New system clean...

    No need to overthink this...

    New system clean install...so just disconnect all but your target drive and internet...boot from install media...install OS...install drivers from MB...install GPU...
  18. No...no need to follow any order...

    No...no need to follow any order...
  19. Replies
    383
    Views
    55,440

    You can save your profiles to USB as CMO files...

    You can save your profiles to USB as CMO files and transfer them between BIOSes these days...;)
  20. Replies
    1
    Views
    164

    4000 can be tricky if the CPU IMC is not up for...

    4000 can be tricky if the CPU IMC is not up for it..

    Try 1.45 Dram and 1.25 SA and IO...up to 1.3v

    Try tweak modes too

    You might find 3600 with tighter timings works better
  21. Have you increased DRAM voltage?

    Have you increased DRAM voltage?
  22. Yes...MXIIHero...4000 18-18-18-38 1.45Dram 1.27...

    Yes...MXIIHero...4000 18-18-18-38 1.45Dram 1.27 SA and IO single 32 GB kit...passes Karhu RamTest

    Obviously this assumes the RAM is good and the IMC semi capable

    86265
  23. Replies
    4
    Views
    204

    Maybe try the GPU in the second slot down...i.e....

    Maybe try the GPU in the second slot down...i.e. the second slot with the metal protector?

    Do you have a spare PSU to try?

    86259

    Can you get into BIOS?
  24. Replies
    4
    Views
    204

    Clear CMOS Maybe remove all power and remove...

    Clear CMOS

    Maybe remove all power and remove MB battery for 30 min
  25. Mixing kits even of "same" type is never going to...

    Mixing kits even of "same" type is never going to help with high frequency RAM

    My experience with these chips leaves me a bit nonplussed with the IMC...however 4000 I've got running on several
    ...
Results 26 to 50 of 499
Page 2 of 20 1 2 3 4 5