Search:

Type: Posts; User: Escorpiom

Page 1 of 2 1 2

Search: Search took 1.29 seconds.

  1. If your memory is indeed Hynix, yes than you are...

    If your memory is indeed Hynix, yes than you are right and my findings do not apply to the issue you are having.
    Corsair has certain versions of those modules with Samsung C-die, you can look at it....
  2. Those sticks appear to be Samsung C-die, and you...

    Those sticks appear to be Samsung C-die, and you have 4 of them.
    It's a known issue with X570 Asus boards and 4 modules Samsung C-die.
    You can try to stabilize them by reducing the voltage...
  3. This is not a temp issue. Are you guys aware...

    This is not a temp issue.
    Are you guys aware that the second NVME slot is connected to the south bridge?
    For any speed issues, I would look at the link between the southbridge and the SOC.
    The...
  4. Replies
    1
    Views
    440

    Open realtek audio console. Go to advanced...

    Open realtek audio console.
    Go to advanced options
    The first switch says: "disable front panel detection". Turn this on.
    Problem solved.

    Some cases have trouble with interference, moreover...
  5. That's certainly not normal. This would point...

    That's certainly not normal.
    This would point to a short circuit, power supplies do not come on when there is a secondary short.
    I would start with checking the pinout, first in the manual and...
  6. It's funny how you point people to the core of...

    It's funny how you point people to the core of the issue, and they just go on and on without paying attention.
    That RAM is not B-die. It's C-die and it behaves completely different.
    Until you...
  7. Welcome to the club of 4 x 16GB Samsung C-die...

    Welcome to the club of 4 x 16GB Samsung C-die users. Investigate your ram to see if this is the issue.
    Only solution for now is to lower ram speed to 3000Mhz, you can however tighten the timings.
    ...
  8. But that kit is only 2 sticks. Your first post...

    But that kit is only 2 sticks.
    Your first post was about 4 dimm stability issues?

    Cheers.
  9. Replies
    3
    Views
    1,224

    You didn't state what processor you have...

    You didn't state what processor you have currently.
    Yes, PCIe gen4 is supported.
    I don't quite understand your last question. The C8H uses the X570 chipset. "Newer" boards use B550 chipset.
    You...
  10. Replies
    7
    Views
    2,972

    - Use Mochiku's audio driver from this board. -...

    - Use Mochiku's audio driver from this board.
    - Use msi based interrupt
    This issue has been discussed many times already and is easily solved.

    Cheers.
  11. Replies
    3
    Views
    1,156

    Yes, this bios is legit and was posted a few days...

    Yes, this bios is legit and was posted a few days ago on the official Asus support pages.
    I assume you are talking about crosshair VIII hero or Dark Hero, you didn't mention the board you have....
  12. I would be surprised if you got this working...

    I would be surprised if you got this working without extensive tweaking.
    First, 4 modules is harder on the IMC. Second, mixing two brands (Hynix and Samsung) is not just straight setting XMP.
    I...
  13. So that was quick. Skipped patch B, straight to...

    So that was quick. Skipped patch B, straight to patch C. AMD had just released this Agesa.
    Sadly for me, improvements are mainly for 5000 series Ryzen APU's.
    Still hoping for a final with better...
  14. Replies
    22
    Views
    3,514

    Thank you, no I don't need more timings....

    Thank you, no I don't need more timings.
    Although it's the same model number (GVK), our kits are completely different. Yours is apparently Samsung B-die, mine is C-die.
    From what I have seen, the...
  15. Replies
    22
    Views
    3,514

    Great to hear that. Do you have the C14 or the...

    Great to hear that.
    Do you have the C14 or the C16 kit? Mine is C16.

    Can you share your voltages and timings?

    Cheers.
  16. Replies
    22
    Views
    3,514

    Soc sits at 1.1688 at the moment. It can be...

    Soc sits at 1.1688 at the moment. It can be pushed a bit, but wouldn't want to go above 1.2v.
    Taiphoon burner misidentifies my kit as Samsung B-die, it's C-die.
    Ryzen dram calculator cannot be...
  17. Replies
    22
    Views
    3,514

    Yep, it's on G.Skill's QVL. I did contact...

    Yep, it's on G.Skill's QVL.
    I did contact support but they only said it was "tested working".
    Using only two modules is working fine though, so really this could be something with the board. C-die...
  18. Replies
    22
    Views
    3,514

    Maybe slightly related, I've got 4x16 Gskill GVK...

    Maybe slightly related, I've got 4x16 Gskill GVK on my CH8 and it has been extremely problematic from day one.
    Modules are rated for 3200Mhz but after months of tweaking they are only stable at...
  19. Replies
    22
    Views
    6,195

    I'm afraid that the USB can't be solved by means...

    I'm afraid that the USB can't be solved by means of AGESA.
    This is most likely a hardware issue.
    The last few AGESA released should have resolved the issue already, but judging by posts from...
  20. Replies
    4
    Views
    1,043

    Yes, AMD chipset drivers from the AMD website are...

    Yes, AMD chipset drivers from the AMD website are more recent and thus recommended.
    Only when troubleshooting specific issues, you can try drivers form Asus website.

    Cheers.
  21. Replies
    15
    Views
    2,604

    Yeah but he can get it up to 3800 at least, and...

    Yeah but he can get it up to 3800 at least, and there is a good change his IMC will do 2000 fclock.
    The worst that can happen is that he has to decouple fclock, latency hit but it will run.
    ...
  22. It's easy to check, just go in the uefi and check...

    It's easy to check, just go in the uefi and check settings, one minute and ready.
  23. Replies
    15
    Views
    2,604

    If the memory is not on the QVL it doesn't mean...

    If the memory is not on the QVL it doesn't mean it wont work.
    Maybe other users that have bought similar kits can give feedback, don't take the QVL as your only source.
    That said, if you want...
  24. Switches use straight cables. The switch is...

    Switches use straight cables. The switch is normally internally prepared for that.
    Only in rare cases you should need a crossover cable.
    When I read your post, it occurred to me that you may have...
  25. Maybe a bit far fetched, but has your internet...

    Maybe a bit far fetched, but has your internet device a 100base port?
    You may need a crossover cable.
    The 1000base standard is auto mdi-mdx, but the fast ethernet 100base-tx is not.
    So this...
Results 1 to 25 of 48
Page 1 of 2 1 2