Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 1.70 seconds.

  1. Replies
    10
    Views
    512

    I'm using the EKWB Velocity and have no real...

    I'm using the EKWB Velocity and have no real gripes with the block. It's only when pushing circa 1.4v+ that the current becomes a little too much for the cooling to handle.
  2. Hello, Remove any CPU overclocking such as PBO...

    Hello,

    Remove any CPU overclocking such as PBO

    Run Karhu Ramtest for 1000-1500% and check for errors at XMP settings.
  3. Can you confirm what VBIOS? Remove any third...

    Can you confirm what VBIOS? Remove any third party tools such as MSI AB.
  4. Replies
    6
    Views
    204

    As above, it's easy to sound like a broken...

    As above, it's easy to sound like a broken record, however, troubleshooting 101 always remove any overclocking. This includes XMP. Thread exception stop codes can quite easily be instability.
  5. Sticky: Very much a how long is a piece of string...

    Very much a how long is a piece of string question. Depends on a multitude of things, not least of all the CPU IMC strength.


    Try these values for 6800, assuming you're using the Apex.

    ...
  6. Hello, Have you tried without XMP?...

    Hello,

    Have you tried without XMP? Troubleshooting 101 is to remove any overclocking. XMP very much falls into this category.
  7. Hello, This section is somewhat ironically...

    Hello,

    This section is somewhat ironically ONLY monitored by ROG staff, so I'm not sure what you're asking given you've now posted in the correct section but without an actual question. ;)


    ...
  8. Combining kits means exactly that, putting two...

    Combining kits means exactly that, putting two kits into the same system. Memory kits are binned in the density in which they are sold in, as soon as you combine them, you greatly reduce your chances...
  9. Hello, 2 DIMMs are preferable on this...

    Hello,

    2 DIMMs are preferable on this particular board due to the daisy chain topology. 4000C19 is preferable, however, manual tuning may be needed. 3600 ratio should be mostly plug and play for...
  10. Hello, As you've already alluded to, the...

    Hello,


    As you've already alluded to, the CL40 6000MT kit is Samsung and the kit you're using now is Hynix. The two kits aren't really directly comparable. It's no easy task dialling in multiple...
  11. Hello, Overclocking is never guaranteed, DDR5...

    Hello,

    Overclocking is never guaranteed, DDR5 is no different. Speeds above 6000MT may require manual tuning on some CPU (most often with VCCSA and Memory Controller VDD)

    6400 working on the...
  12. Are you not combining memory kits? From your...

    Are you not combining memory kits?

    From your post here, it seems that way.
  13. It's not always down to weak IMC problem but an...

    It's not always down to weak IMC problem but an alignment one. Some CPUs and memory kits are more comfortable at certain voltages (VCCSA/MemorycontrolVDD) than others. Ergo, it's not always "more"...
  14. Hello, Speed won't be an issue. The only real...

    Hello,

    Speed won't be an issue. The only real downside to utilising the DIMM.2 slot is the module sits fairly close to the residing DIMMs, so you may wish to look into some active airflow on that...
  15. Stick to the slots as allocated in the manual to...

    Stick to the slots as allocated in the manual to utilise the correct number of channels/speed. There are reasons at an electrical level why these are the preferred slots.
  16. Replies
    10
    Views
    512

    Hello, You say you eliminated cooling as the...

    Hello,

    You say you eliminated cooling as the problem, however ultimately that's all it can be. Sounds like a mounting issue or the block isn't particularly good at cooling this CPU. The former...
  17. Sticky: https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview
  18. Maximum values aren't as important as finding the...

    Maximum values aren't as important as finding the right value, as these are CPU specific. Using too much voltage can cause system instability.

    System Agent: 0.9v - 1.28v

    Memory Controller VID:...
  19. Hello, The memory overclock is unstable. Start...

    Hello,

    The memory overclock is unstable. Start by tuning the CPU System Agent (Extreme Tweaker) and Memory Controller Voltage (Extreme Tweaker>Advanced Memory Settings)
  20. Hello, for your board I would recommend kits...

    Hello,

    for your board I would recommend kits in the region of 5800 to 6000MT. Above this can rely on CPU variance.
  21. I have that kit, dialled in fine. Tune Memory...

    I have that kit, dialled in fine. Tune Memory controller VDD and System Agent voltages. Solution implies all CPUs are the same, which they are not
  22. Anyone trying to combine two kits rated at 6000MT...

    Anyone trying to combine two kits rated at 6000MT is in for a rough time.

    Stop combining kits and chalk it up to misadventure on your part. This has been covered many times, also see sticky on...
  23. Hello, check SPD for your kit in AIDA64, are you...

    Hello, check SPD for your kit in AIDA64, are you saying there's a profile not showing in the UEFI that should be? If so please elaborate.

    XMP 3.0 is the technology iteration. This is present on...
  24. Performance of 8x PCIE 4.0 vs 16x PCIE 4.0 is...

    Performance of 8x PCIE 4.0 vs 16x PCIE 4.0 is fairly minimal, so personally, I'd evaluate whether it's worth moving the drive at all.
  25. Hello, I would contact HWinfo to confirm....

    Hello,

    I would contact HWinfo to confirm. Possibly distance to T-Junction, but I wouldn't be concerned if the system is working as intended.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4