Search:

Type: Posts; User: Nate152

Search: Search took 0.05 seconds.

  1. Replies
    20
    Views
    916

    Ok, Was trying to see if we could get them to...

    Ok,

    Was trying to see if we could get them to show and since they are not showing at any frequency after applying the liquid metal, I'm wondering if there was some liquid metal run off inside the...
  2. Replies
    20
    Views
    916

    If this doesn't work, I'm wondering if there was...

    If this doesn't work, I'm wondering if there was some LM run off inside the cpu.
  3. Replies
    20
    Views
    916

    Like you, I'm finding it odd just switching to LM...

    Like you, I'm finding it odd just switching to LM would cause the problem.

    I see you delidded your 7940x, I delidded my 7700k with thermal grizzly conductonaut and got an average of -15c in temps,...
  4. Replies
    20
    Views
    916

    On my motherboard, Dram Frequency shows at the...

    On my motherboard, Dram Frequency shows at the top of the extreme tweaker tab in yellow.

    The two sticks disappearing when setting a higher frequency tells me there is instability somewhere.

    I...
  5. Replies
    20
    Views
    916

    Ok, you're making some progress, but still 2...

    Ok, you're making some progress, but still 2 sticks not showing.

    Dram voltage up to 1.50v is safe and the maximum recommended by Intel.

    I use Dram voltage of 1.55v with my G.Skill Trident Z's.
  6. Replies
    20
    Views
    916

    It's possible but normally when something like...

    It's possible but normally when something like that happens the whole cpu goes.

    Have you tried adjusting other voltages to help get your ram stable?

    I'm not sure about your motherboard but if...
  7. Replies
    20
    Views
    916

    All right, While you have it disassembled,...

    All right,

    While you have it disassembled, check for any liquid metal that may have overflowed onto something it shouldn't have.

    It cleans off fairly easy if you can get to it.
  8. Replies
    20
    Views
    916

    Hi 13oots2 From your problem described, I'd...

    Hi 13oots2

    From your problem described,

    I'd double check the cpu socket for any misaligned pins with a magnifying glass.

    When installing your cpu cooler water block, don't crank it too...
Results 1 to 8 of 8