Search:

Type: Posts; User: Godofmosquitoes

Page 1 of 4 1 2 3 4

Search: Search took 0.23 seconds.

  1. The Kingston HyperX HX436C18FB3K4/128 set is QVL...

    The Kingston HyperX HX436C18FB3K4/128 set is QVL approved for Dark Hero. Should be a chance it'll work with the Extreme as well.
  2. Why not just go to something like station drivers...

    Why not just go to something like station drivers and get the latest universal Realtek HD Audio driver? It's always newer than anything the OEM's (such as ASUS) has on their homepages anyway. And...
  3. Good thing you found the VBIOS dropbox link I...

    Good thing you found the VBIOS dropbox link I posted on the MSI forums. Glad it works for you :)
  4. That explains it. The Re-BAR BIOS versions for...

    That explains it.

    The Re-BAR BIOS versions for the 3090 Gaming X Trio is 94.02.42.00.F1 and 94.02.42.00.F3, for the Low Noise and Low Temp versions respectively.

    Neither of those have however...
  5. If all the settings are really set as you have...

    If all the settings are really set as you have listed them, then the VBIOS of your card hasn't been updated properly. What brand and model 3090 card are you using? Try and go to their support page,...
  6. Replies
    22
    Views
    2,952

    Sure, it just seemed like Red meant slots and not...

    Sure, it just seemed like Red meant slots and not ranks. But he clarified that. My F4-3200C14Q-64GVK kit is dual rank, and run without any issues. 4x16GB.
  7. 1. Yes. 2. Yes, it will show other Q-codes....

    1. Yes.

    2. Yes, it will show other Q-codes. The system makes a system check on bootup, where each system is checked one at a time. If any step of the system check fails, it will show the Q-code...
  8. Replies
    22
    Views
    2,952

    As far as I have read, Ryzen 5000 series runs...

    As far as I have read, Ryzen 5000 series runs best with all four ranks of memory being filled.

    Milky, as far as the RAM goes, yeah it seems to be different kits. Yours are of course also D-kits,...
  9. Replies
    22
    Views
    2,952

    It's a C14 kit. I run with the XMP settings,...

    It's a C14 kit. I run with the XMP settings, resulting in 1.35V, and 14-14-14-34 timings. Do you need additional timings beyond those?
  10. Replies
    22
    Views
    2,952

    I'm running a 3200MHz G.Skill GVK 64GB (4x16GB)...

    I'm running a 3200MHz G.Skill GVK 64GB (4x16GB) kit as well on the Dark Hero. No issues with instability.
  11. Replies
    6
    Views
    13,954

    Rampage V Edition 10 works fine with TPM 2.0, and...

    Rampage V Edition 10 works fine with TPM 2.0, and has a connector for an ASUS TPM 2.0 module.
  12. Replies
    78
    Views
    53,487

    I've owned a lot of Gigabyte motherboards. None...

    I've owned a lot of Gigabyte motherboards. None of them came with TPM modules. There's firmware TPM, but everyone has that, if the platform supports it.
  13. I run G.Skill F4-3200C14Q-64GVK with DOCP, which...

    I run G.Skill F4-3200C14Q-64GVK with DOCP, which I can now confirm are completely stable on the Dark Hero motherboard, running my 5950X at stock.
  14. I have now. None of them worked, though. Even...

    I have now. None of them worked, though. Even setting both places as 2T didn't solve the issue. The system still reports 1T in Windows.
  15. I tried changing the BIOS on my card to the Low...

    I tried changing the BIOS on my card to the Low Temperature version, found on MSI's website. This dramatically reduced the heat of my M.2 drives while gaming. The 980 Pro, installed in the lowest 16X...
  16. I have a theory that there might be a slight...

    I have a theory that there might be a slight instability with my RAM when running it at 1T. So I want to try and running it at 2T (which its specifications from G.Skill also rate it as), to see if...
  17. So, I played around with it some. With my 3090...

    So, I played around with it some. With my 3090 spilling 350W inside my case, and also radiating heat, the upper M.2 slot temperatures get too high during stress to my liking.

    In my case, during...
  18. That sounds like a hardware error on the...

    That sounds like a hardware error on the motherboard mate. Sorry :/ Get it replaced.
  19. Crosshair VIII Dark Hero - unable to set RAM Command Rate to 2T

    Hi.

    So, I have a rather strange problem. I load my system with the XMP profile for my RAM, which sets 14-14-14-34 timings. However, it's also supposed to set my RAM with a Command Rate of 2T....
  20. Crosshair VIII Dark Hero M.2 SSD's get really hot?

    So, I have two M.2 SSD's on my Dark Hero board. And they both get super hot during gaming.

    In the upper slot above the graphics card, I have my old Samsung 960 Pro installed, and below the...
  21. The latest bluetooth driver for the Broadcom...

    The latest bluetooth driver for the Broadcom chipset on the R5E Edition 10 is 12.0.1.921. Just saying. Using the driver on ASUS' site is not better. They aren't chosen by ASUS as the "best" drivers....
  22. Replies
    5
    Views
    1,370

    Hi. You're looking for an m2x3 screw. You can...

    Hi. You're looking for an m2x3 screw. You can usually buy them in bulk for next to nothing. Like, you have to order 25 screws. But it doesn't really cost anything.

    Edit: Only thing you have to be...
  23. As far as I understand it, only certain...

    As far as I understand it, only certain 2000-series cards and the new 3000-series cards include the DSC specification to their DisplayPort implementations. Your 1080 card doesn't support DSC,...
  24. Replies
    32
    Views
    6,647

    I have the same monitor, and I experience no...

    I have the same monitor, and I experience no issues playing at 1000 nits with HDR in games. No flickering, or anything of the sorts. Your panel must be busted. Send it in for RMA.

    Edit: I do...
  25. Replies
    0
    Views
    1,572

    Microcode 38 for Broadwell-E

    There's a new microcode revision out for 064F01 revision CPU's (Broadwell-E 6950X etc.), which is now version 38. Been out since September. I've baked a version of the R5E10 1903 BIOS with it in, for...
Results 1 to 25 of 88
Page 1 of 4 1 2 3 4