Search:

Hi Makezu90,

Try this:

Connect the usb-c cable to your ROG Falchion and a usb port on your pc, set the wireless switch to on. Connect the wireless dongle to a usb port on your pc then try the...

Hello JayM16,

The ROG Maximus VIII Hero supports up to 3800MHz memory.

A 16GB kit (2x8GB) would have a better chance at running at 3600MHz.

Here are the tech specs.
...

Try using the Armoury Crate uninstall tool and reinstalling Armoury Crate.

Select windows 11 and click Show all in blue, it's the third download. Once uninstalled, install Armoury Crate version...

Let's go for round 2, I'm trying to hit your average frames per second of 79.4.

This time I overclocked my cpu.
Overclocked my ram to 6133MHz
Set Nvidia Control Panel to performance

GPU Core...

Hi Tejc_

A couple things to try.

Reset bios to default settings.

Update to the latest bios.

Check Samsung Magician for a firmware update.

Hi TrebleTA,

He's using the MSI GTX 1080 Ti Gaming.

It could be how the graphics card initializes at boot.

An adapter cable might be the solution or if the monitor has other connection...

All right, I don't know if this would help but...

While your pc is on, disconnect the secondary display.

Reboot, and let the displayport monitor become the primary display.

Then connect the...

That was for the Nvidia Control Panel, have you tried the windows settings too?

94553

Hi jaristr,

You should be able to change the primary display in the Nvidia Control Panel.

94552

Hey Silent Scone

Excellent guide, your ROG Strix 3090 ti LC OC is a hair better than mine at overclocking. To compare, I used the Cyberpunk 2077 benchmark with the same settings as yours.

CPU...

Hi Robiba,

Welcome to the ROG forum.

Those temps aren't too bad for a laptop.

Because laptops have limited cooling they will always run warmer than a desktop, do you crank up the fans when...

The problem is likely that you're combining two memory kits, combining two memory kits is not advised.
...

Thank you for your update drbtt.

Good to hear all is working well.

Thank you,

Since that didn't work, try resetting the bios to defaults.

Do you still get the error?

Hi kja939

Welcome to the ROG forum.

Setting Command rate to 2T or 2N might get you to post.

Command rate is found in the Dram Timing Control section of the bios under primary timings.

Odd...

If you're overclocking your gpu, reset GPU Tweak III to defaults and see if the error persists.

If you still get the Nvidia Web Helper error, try installing the latest Nvidia driver.

The latest...

Hi JBM

As cekeu pointed out, connect the usb-c cable to your ROG Keris and a usb port, set the switch to 2.4GHz wireless mode, insert the dongle into a usb port.

Try the update in Armoury Crate.

CSM = Compatibility Support Module

Enabled, it is for Legacy bios support. Since you've done a UEFI install, you want to disable CSM as I do.

Disabling CSM can help speed up boot time. Just...

I'm pretty sure there is no other fix, but if you come across one, I'd certainly be interested to know what it is.

Yes that is correct.

windows 11 installs the ethernet driver and will work fine, you can choose to update the LAN driver in the drivers list.

All right,

If the uninstall tool didn't work, the only other solution I know of is to reinstall windows.

Be sure to update the bios first.

Since it works the same for me, this must be how the new version of Armoury Crate works.

I wouldn't sweat it if all is normal once booted into windows.

Good to see you got it solved Tekamine.

Thank you for providing your solution.

This must be normal as mine does the same thing, it does the rainbow effect when booting up, once booted into windows it sets my color.

Click the link below and select your operating system, the latest drivers will be shown under each category.
...