Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds; generated 40 minute(s) ago.

  1. OK good stuff! I don't know of a good...

    OK good stuff!



    I don't know of a good resource for that...you have to catch the message and find what "number" it is and have a look on some of the older number lists...the most common ones...
  2. Replies
    9
    Views
    118

    If you are on Win 1803...i.e. version before 1809...

    If you are on Win 1803...i.e. version before 1809 I think you can uninstall Win update KB4100347

    Have a look through this thread for workrounds maybe
    ...
  3. Yeah, I hear ya...DDR4 has been dropping but not...

    Yeah, I hear ya...DDR4 has been dropping but not to any reasonable level...the cartels are keeping it at eye-watering levels still

    3200 is a nice frequency sweet spot....CPU memory controller...
  4. Replies
    2
    Views
    112

    It's not morse strictly... ...

    It's not morse strictly...

    https://www.computerhope.com/beep.htm
  5. Replies
    9
    Views
    118

    The simplest OC you can do is simply set the...

    The simplest OC you can do is simply set the multiplier and let eh MB set everything else voltage related...just don't make the multiplier too ambitious to start with...

    If that doesn't work it's...
  6. Replies
    9
    Views
    118

    Maybe that BIOS does not include the latest...

    Maybe that BIOS does not include the latest microcode it is from 04/2018...the shenanigans happened well after that....maybe another BIOS update is needed...I'd contact ASUS support
  7. I wouldn't listen to a word that bloke says... ...

    I wouldn't listen to a word that bloke says...

    Have a read of the build guide in my sig...especially the part about RAM

    Maybe get a 4133 Cas 17 kit and try that...maybe 3600 Cas15

    If you...
  8. Replies
    9
    Views
    118

    Have you updated to latest BIOS? There was a...

    Have you updated to latest BIOS?

    There was a Windows update that killed all OCs on 6xxx CPUs
  9. No...it runs to officially supported specs no...

    No...it runs to officially supported specs no doubt. Higher frequencies are "OC"

    There is a lot of VRM misinformation on the net.
  10. Yeah, I saw yours was beyond saving...if they go...

    Yeah, I saw yours was beyond saving...if they go too far they work harden bending back and snap...but many can be saved...I was wondering if 28beers could be saved...

    Hope ASUS can sort you for...
  11. How bent? I'm so experienced they call me...

    How bent?

    I'm so experienced they call me Experienced Saknussemm instead of Arne....but I have bent a pin or two in my time

    I've always teased them back so perfectly you would never know...so...
  12. You talkin' to me? 78254 Skill, dedication,...

    You talkin' to me?
    78254

    Skill, dedication, hours of training....:o

    Are you running "local" memory mode? Numa is it in BIOS...?
  13. This is a typical error message for insufficient...

    This is a typical error message for insufficient vcore

    Seems like the auto tune is not stable.

    You are best off OCing yourself in the BIOS

    The VRM phase count is not relevant.
  14. More often than not it's the memory controller on...

    More often than not it's the memory controller on the CPU...but at least this way you can be sure of that...
  15. Nice...nice CPU....always good when you get a...

    Nice...nice CPU....always good when you get a golden chip! :cool:
  16. OK...good to hear!

    OK...good to hear!
  17. Replies
    7
    Views
    203

    Cheers toronto699!:)

    Cheers toronto699!:)
  18. I am, of course, not mixing kits...so the kit...

    I am, of course, not mixing kits...so the kit size: 32GB
  19. Hi mikey_m What kit did you buy...exact part...

    Hi mikey_m

    What kit did you buy...exact part no

    I'm wondering if XMP on a recent kit would be trying to run at too low a voltage.....2400 is at 1.65v right?
  20. Try setting up manually. Set 3000MHz for RAM ...

    Try setting up manually.

    Set 3000MHz for RAM

    Set Dram voltage to 1.35
    Set SOC voltage to 1.2

    Set primary timings to 16-18-18-18-38 and leave all the rest on auto

    See if that boots
  21. Replies
    9
    Views
    7,790

    Ideally, clear CMOS should be done with no power...

    Ideally, clear CMOS should be done with no power to board (leave it without power for some minutes) then press Clear CMOS button...

    Unless you are using RAID there is no need to change to RAID in...
  22. When you test with RealBench it's probably worth...

    When you test with RealBench it's probably worth it to select total system memory to give it a proper stressing...i.e. 16GB in your case rather than 8

    Prime 95 is a truly outdated test of...
  23. Nice one! I have a similar kit...they OC well...

    Nice one!

    I have a similar kit...they OC well and/or tighten timings if you play about with them...assuming G.Skill are still using similar ICs
  24. https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

    Definitely the latter :)
  25. f4-3200c14q-32gvk

    f4-3200c14q-32gvk
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4