Search:

Type: Posts; User: Super Gnome

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Hey Corna. I am using an AMD system currently...

    Hey Corna. I am using an AMD system currently because my Rampage VI Omega Extreme system was crashing tons, needed Windows reinstalls a few times, and the list goes on (and I blame Asus software for...
  2. Thank you kindly for the info. :D Please keep...

    Thank you kindly for the info. :D Please keep us posted. Also, are you monitoring your system--that is, voltages, clock speeds, CPU core temperature, etc. with HWMonitor or something else?
  3. Thanks for the reply and advice, I really...

    Thanks for the reply and advice, I really appreciate it. To be frank and honest, I had everything set to default, and have never had a computer that required anything more than that (mind you I do...
  4. After Bios 3006 had my 9980xe cpu constantly...

    After Bios 3006 had my 9980xe cpu constantly overclocked at idle ( 4200 MHz at idle for more than 20 hours) while my Asus Ryujin falsely showed the temperature as normal (bogus reading of around 35...
  5. New Bios For Rampage VI Extreme Omega--when?? Oh wait--TODAY

    The last Bios was a fail for at least a handful of us--due to issues it has with our CPU clock speeds.

    So when is the next one out? Oh wait, it's out. My rig has just been collecting dust...
  6. Replies
    4
    Views
    163

    When you say this platform, what exactly are you...

    When you say this platform, what exactly are you referring to? LGA 1200 socket systems?
  7. Replies
    4
    Views
    163

    I have a Ryujin 360 and had one connector...

    I have a Ryujin 360 and had one connector connected to the water pump connector for the longest time, and it made no difference--the fans were still turning no problem, and my CPU core temperatures...
  8. Replies
    9
    Views
    1,422

    Not to rant so much as to feel you, my current...

    Not to rant so much as to feel you, my current bios is an older one because the newest one has a number of us with overclocked CPUs at default. Hence we all reverted to an older one. This system,...
  9. Replies
    9
    Views
    1,422

    I've completely removed all Asus software except...

    I've completely removed all Asus software except for the Bios. It doesn't work properly either.
  10. Rampage VI Extreme Omega 9980xe High Max Clock Speeds.

    After a few hours of playing World of Warcraft all of the cores are showing maxing out in the twenty thousand range MHz. Here is a shot of the cores using HWMonitor after an hour or so. When there...
  11. Replies
    23
    Views
    3,329

    Hey Hopper, Thanks for posting this link, big...

    Hey Hopper,

    Thanks for posting this link, big time. Also, would you recommend downloading both of these?

    07/28/20 Marvell AQtion Windows 64-bit Driver 2.1.21
    07/28/20 Marvell AQtion...
  12. Replies
    1
    Views
    146

    Rampage VI Extreme Omega Fans, etc

    The board is a Rampage VI Extreme Omega. On cold start the fans blast at high speed, but then on restart they then function normally. But this is every time.


    Here is a little history: The...
  13. Replies
    2
    Views
    456

    AMD X570 New Chipset Drivers

    If you prefer to get your X570 chipset drivers directly from AMD here are the latest:

    https://www.amd.com/en/support/chipsets/amd-socket-am4/x570

    AMD Chipset Drivers
    Revision Number...
  14. Replies
    2
    Views
    155

    The trick to Asus is to install as little of its...

    The trick to Asus is to install as little of its software as possible--basically none is best. I'd even forego the Asus Bioses if possible--half the time even they are problematic. All my dreams...
  15. I've given up on sync and all of that RGB,...

    I've given up on sync and all of that RGB, digital display stuff, etc. It worked for a few months and then it became a source of headaches. I no longer install any Asus software except for the...
  16. Not sure if this helps, but has anyone tried...

    Not sure if this helps, but has anyone tried reinstalling Windows and then installing Armoury Crate again?
  17. Replies
    3
    Views
    130

    A few months ago you had something called a...

    A few months ago you had something called a "Refresh Tool" but it seems to have disappeared. I used virtually the same thing under "Recovery" in settings (basically a reinstall of Windows with some...
  18. Replies
    7
    Views
    28,601

    Oddly, for a couple weeks now, my Crosshair VI...

    Oddly, for a couple weeks now, my Crosshair VI Formula does one beep (which means all is fine), and then a few seconds later follows up with one long four short beeps (which according to an old Asus...
  19. Replies
    12
    Views
    109,146

    Has anyone worked out how to get rid of AI Suite...

    Has anyone worked out how to get rid of AI Suite III?

    Edit: Well, I gave up and just reinstalled Windows (and everything else minus AI Suite 3). You can mess with Revo Uninstaller, but you are...
  20. Replies
    0
    Views
    327

    AI Suite 3 Fan Control

    After a Windows reinstall, I made the unfortunate mistake of believing AI Suite 3 would again properly control the fans so I installed it. Instead AI Suite Fan Xpert just had the fans blast away...
  21. Crosshair VIII Formula -- One Long Four Short Beeps

    If you have your speaker hooked up you will get one short beep on startup. In my case, with the C6F motherboard on startup you get the one beep (which I think means all is good), but then a couple...
  22. It's your Ryujin that is basically giving you a...

    It's your Ryujin that is basically giving you a false number. The number the Ryujin displays is taken from a probe behind the CPU, so it's not really trustworthy.

    This guy goes into depth about...
  23. Replies
    24
    Views
    1,931

    I believe there are four ways to do it. 1. ...

    I believe there are four ways to do it.

    1. Download to USB and use port at the back. (This typically works but is a bit of a hassle--if you need details, check the manual. Alternately, I know...
  24. Replies
    3
    Views
    130

    R6EO/9980xe Four crashes in a row

    The motherboard is a Rampage VI Extreme Omega. The thing started up and then the desktop seemed to flash, as if resetting and then bam. Blue screen one with the error APC_INDEX_MISMATCH. Then ten...
  25. Replies
    24
    Views
    1,931

    Yeah, it is confusing isn't it? The thing about...

    Yeah, it is confusing isn't it? The thing about 2103 is that it the latest and it improves system performance. Hence, it is the better one. However, I have another rig with a different motherboard...
Results 1 to 25 of 319
Page 1 of 13 1 2 3 4