Search:

Type: Posts; User: Mappi75

Page 2 of 8 1 2 3 4 5

Search: Search took 0.01 seconds; generated 120665 minute(s) ago.

  1. What i recommend: use different test programs:...

    What i recommend:

    use different test programs:

    hci memtest pro and karhu RAM Test

    normaly i would only use hci, because it founds every time errors and karhu runs12+ hours stable.

    Now i...
  2. Testing now the G.Skill 32GB 4266 17-18-18-38 Kit...

    Testing now the G.Skill 32GB 4266 17-18-18-38 Kit - first impression: more difficult to get stable and needs more voltages.

    Running now MemTest Pro (which works best for me finding errors).
  3. My 9900K worked only with 3900 17-17-37 My...

    My 9900K worked only with 3900 17-17-37

    My 9900KS works with full speed - here is my setup:

    2019/11/05 20:00:53]
    Ai Overclock Tuner [XMP II]
    XMP [XMP DDR4-4140 17-17-17-37-1.40V]
    BCLK...
  4. Search for (in Bios) Boot VCCIO & Boot SA...

    Search for (in Bios)

    Boot VCCIO & Boot SA Voltage

    I set both to 1,29375v - after booting it use 1,2250v for both voltages.

    Thats the voltages my 9900KS needs to run.
  5. Did you set the SA + vccio boot voltage ? In...

    Did you set the SA + vccio boot voltage ?

    In bios you can set higher voltages for booting the system - and then it will take the normal voltages.
  6. lol running G.Skill 32GB 4.133Mhz 17-17-37 Kit...

    lol running G.Skill 32GB 4.133Mhz 17-17-37 Kit the first time on the Asus Maximus XI Extreme (thanks to the 9900KS)!

    Now running (and reaching) 24 hours HCI MemTest Pro and no errors (reaching...
  7. I found the solution: - tWRWR_dg was "8" and...

    I found the solution:

    - tWRWR_dg was "8" and have to be "4" (thats fixes the bad WRITE performance).
    - disable MemOk! on Mobo
    - loading XMP II Profile and set the voltages higher

    > the...
  8. Update: the memory will work only with max...

    Update:

    the memory will work only with max 3.600Mhz - over 3.600Mhz the system will reboot often and MemOk! will reduce the memory speed 100mhz less.

    The strange:

    After MemOk does its job it...
  9. Ok it looks its only when i try to set the...

    Ok it looks its only when i try to set the 4.133mhz for the memory.

    This time the Board did not boot twice..
  10. 9900KS & Maximus XI Extreme & RAM OC = kills Memory Write

    Hi

    replaced my 9900K with the 9900KS did a Bios reset and a Bios Flashback with the same bios,
    because this combo shows a strange behavior.

    Every time i want to run the memory with 4000+ Mhz...
  11. Thanks - works great! :)

    Thanks - works great! :)
  12. Save Bios config to a *.txt file for printing ?

    Maximus XI Extreme,

    is there a way to save the bios to *.txt file for printing?

    THX for helping!


    Edit: i know there is F12 for saving Screenshots on a usb stick (but i want *.txt)
  13. Replies
    81
    Views
    7,569

    In november the cpus will be released ;)

    In november the cpus will be released ;)
  14. You have to try this (this helps me): The...

    You have to try this (this helps me):

    The problem: my system reboots very often and did not start windows

    The idea: during booting the vccio/sa need much more voltage then in windows.


    ...
  15. thanks i will check this! Edit: Thanks this...

    thanks i will check this!


    Edit: Thanks this helped a lot!

    Now i can boot 32gb @3900mh-17-17-37 via higher voltages and then in windows it uses lower voltages:

    CPU VCCIO Voltage: 1,0625v...
  16. @Carlyle2020 Thank you very much! This helps...

    @Carlyle2020

    Thank you very much! This helps a lot :)

    BTW: i found a solution for running the Kit @4.133Mhz CL17.

    normal i'am not able to boot the system over 4000mhz.

    - I removed 3 mem...
  17. Is there a way to give for booting higher...

    Is there a way to give for booting higher voltages ?

    My system runs perfect stable at 3.900Mhz CL17 but i have problems during booting - system hangs often
    in a boot loop.

    In win 10 i need...
  18. Yeah that sounds be better! (could be imagine...

    Yeah that sounds be better! (could be imagine that on reboots the mobo tries to use T1 an fail again..)

    BTW: trying now 3.800Mhz CL17-17-17-37-2N > pc boots without any problems - no windows...
  19. Did you use Mode 2 ? and the memory fixed at 2N...

    Did you use Mode 2 ?
    and the memory fixed at 2N ?

    BTW: 3.866Mh is pretty high too - dont think my cant handle this (or better: my cpu).
  20. @cniedzi Did you see my post here? This could...

    @cniedzi

    Did you see my post here? This could be interesting to you:
    ...
  21. Hello, maybe the Macrium Reflect Home and WinRAR...

    Hello, maybe the Macrium Reflect Home and WinRAR Error is another error!?

    I have the extreme board and since years i put my optical drive on the SATA6 (6) Port (the last one).

    This time i...
  22. Short update: hci memtest pro v.6.3 find...

    Short update:

    hci memtest pro v.6.3 find Errors on 4000mhz Memory lowering to 3866mhz still find error - even with high voltages (VCCIO & VCCSA 1,30v)
    So i have to test more…


    @Loadlineac
    ...
  23. Replies
    19
    Views
    30,436

    Thanks for helping me! M.2_1 is the place...

    Thanks for helping me!

    M.2_1 is the place where i installed the Samsung 1TB 970pro - and you was right - its a little bit tricky to remove the cover ^^
  24. Thanks for the info - hoping to see the bios...

    Thanks for the info - hoping to see the bios soon.

    This should be the Link BUT its !!! not offical released!!!
    ...
  25. Still using Mode 1. CRC Errors with macrium i...

    Still using Mode 1.

    CRC Errors with macrium i have to check.
Results 26 to 50 of 185
Page 2 of 8 1 2 3 4 5