Search:

Type: Posts; User: 1mluer

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thread: ahh a new error

    by 1mluer
    Replies
    1
    Views
    70

    ahh a new error

    It says my post is too small :) I am getting a Napoleon Complex now.. You can see my post is well over 3 characters :) I was trying to respond to the W10 version 1903 post

    80723
  2. you need to go to device manager and under...

    you need to go to device manager and under monitors right click and go to properties. then go to update driver. navigate to that folder and select the .inf file I think it is. it will probably be...
  3. There should be a display driver. go to this...

    There should be a display driver. go to this link and download the driver for your monitor

    https://www.asus.com/us/ROG-Republic-Of-Gamers/ROG-SWIFT-PG279Q/HelpDesk_Download/
  4. Replies
    1
    Views
    308

    Personally I just set the fans on their own fan...

    Personally I just set the fans on their own fan curve in AI Suite III. It works perfectly. I am also using the lastest version of aI Suite III so it labels the fans correctly. Try doing a fan...
  5. Do you have Aura Sync loaded ? The lighting...

    Do you have Aura Sync loaded ? The lighting service plays a part in generating the visuals and lighting control.
  6. Replies
    495
    Views
    198,471

    lets hope it doesn't start hogging cpu cycles...

    lets hope it doesn't start hogging cpu cycles just to change colors. I always find if I use Rainbow the cpu jumps as high as 8% just to run the lightingservice. If change it from Rainbow to...
  7. Thread: ROG Claymore

    by 1mluer
    Replies
    370
    Views
    144,255

    This can be done with manual control using the...

    This can be done with manual control using the keyboard firmware. just hit Function key and up arrow to make brighter and function key down arrow to dim the LED's
  8. Replies
    5
    Views
    324

    I agree it's getting progressively worse or at...

    I agree it's getting progressively worse or at least it is for me and the threads I am trying to post on.
  9. Replies
    205
    Views
    10,086

    I never hear my Matrix's pump. no noise at all .....

    I never hear my Matrix's pump. no noise at all .. hmmmm
  10. Thread: Access Denial

    by 1mluer
    Replies
    34
    Views
    742

    Starting to be more frequent now.. I can't...

    Starting to be more frequent now.. I can't respond to a couple of threads because of this.
  11. give us pics when it's installed before and...

    give us pics when it's installed before and after.. I would love to know how these work..

    Thanks
  12. Thread: ninezerofive

    by 1mluer
    Replies
    19
    Views
    1,658

    Where you been man :)

    Where you been man :)
  13. Replies
    12
    Views
    391

    Ya it's good stuff too.

    Ya it's good stuff too.
  14. Replies
    12
    Views
    391

    Always comes in with great temps, but is pretty...

    Always comes in with great temps, but is pretty risky if you make a mistake.. it is conductive so anything that gets on the motherboard could be catastrophic. If you are not superclocking it's not...
  15. Replies
    2
    Views
    164

    Paste all the way I am thinking. But here are 2...

    Paste all the way I am thinking. But here are 2 separate tests.. One was good and one was bad. the good one was ok against a mediocre paste.. the other just showed higher temps. I do have to say...
  16. Replies
    266
    Views
    43,797

    Ya I posted this under the GPU Tweak II Beta...

    Ya I posted this under the GPU Tweak II Beta thread up top.. when I went back to the previous version it stopped..
  17. Replies
    84
    Views
    27,996

    Sticky: I just upgraded from previous version to 2.0.0.1....

    I just upgraded from previous version to 2.0.0.1. Everything seems to work with the OC part. I think it is interfering with the lighting profile because when I change any OC value and hit...
  18. Thread: Start button

    by 1mluer
    Replies
    2
    Views
    157

    here is what I would do.. I would get this .. cut...

    here is what I would do.. I would get this .. cut off that power connector and replace it with this one. There is no need for polarity check because it is just on and off.
    ...
  19. Replies
    28
    Views
    1,232

    I just got your same error trying to answer a...

    I just got your same error trying to answer a technical post showing how to create a batch file.
  20. What OS and user is assigned? might want to...

    What OS and user is assigned?

    might want to use something like this in a .bat file:

    The boards wouldn't let me write the code so I added it to a zip file as a batch file.

    You would need to...
  21. Replies
    3
    Views
    431

    Ya its all the lightingservice. I boot my...

    Ya its all the lightingservice. I boot my machine cold start and the lighting service never initializes and works. I then have to go into services and restart the lightingservice and it works...
  22. Replies
    5
    Views
    324

    ahh sounds like possible parameter settings on...

    ahh sounds like possible parameter settings on message size either at PHP level or in the boards directly. Or some other plugin acting up if they have any. :) Every thing cleared up for me...
  23. Replies
    217
    Views
    39,716

    Sticky: the only issue I have with Aura now is that after...

    the only issue I have with Aura now is that after the machine boots and aura doesn't kick in I just restart the LightingService in the Services MMC and it kicks in. Once it kicks in my motherboard...
  24. Replies
    5
    Views
    324

    Awesome Job of the board fix - Thank you!!

    Appreciate you getting around to fixing the issues with the boards. I know how DB's and permissions can send the boards into a tizzy. They seem very responsive now and are not telling me to log in...
  25. Replies
    12
    Views
    391

    Not here. I changed to Noctua NT-H2 the newest...

    Not here. I changed to Noctua NT-H2 the newest version.. It's amazing and it did drop my temps big time. between 6c and 10c. No lies no BS :) It also has a new consistency that binds better then...
Results 1 to 25 of 268
Page 1 of 11 1 2 3 4