Search:

Type: Posts; User: BigJohnny

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    82

    I didnt have an issue with different VMDs on R6E....

    I didnt have an issue with different VMDs on R6E. with two 900P AIC cards.
    I do remember that setting it in the BIOS was worthless. Never did show up right and boot partition just said windows boot....
  2. Replies
    10
    Views
    1,109

    Thanks, Between the FW update and driver update...

    Thanks,
    Between the FW update and driver update my 10GB is working again.
  3. Replies
    4
    Views
    82

    RVIEE VROC on DIMM.2

    Anyone running VROC on DIMM.2 with a pair of 905P M2 drives?

    If so did it take using F6 drivers at win install?*
  4. Encore SLI for two X16 are top two slots.*

    Encore SLI for two X16 are top two slots.*
  5. You left out the 4 dedicated to the DMI. If you...

    You left out the 4 dedicated to the DMI.
    If you have a 99XX the last slot can only be X4. No matter which you have X16, X16, X8 or X!^, X16, X4 if the bottom slot is used DIMM.2_2 is not. Its one or...
  6. Yes this can be done. Only thing you cant do is...

    Yes this can be done. Only thing you cant do is PCIEX4 and DIMM.2_2 at the same time, its one or the other and that shows up in drives section of the BIOS to select one or the other. The M2 drives...
  7. ^^^ What he said. I did the free upgrade on one...

    ^^^
    What he said.
    I did the free upgrade on one machine long ago and ended up going back and doing a clean install anyway as I dont care what you do that jump is just too much.
    Sounds like your...
  8. I ran the 10G on my RVIE without so much as a...

    I ran the 10G on my RVIE without so much as a burp for more than a year. Now with the Encore edition and drivers from .18 that can with the board to .20 from station drivers. Something as simple as...
  9. Replies
    10
    Views
    303

    What makes you so sure? Is quite possible they...

    What makes you so sure? Is quite possible they screwed up the manual and pin out diagrams. My big issue is clearly labeled 12V ATX and shows reverse polarity of what is on a PCIE cable. If it was...
  10. Replies
    10
    Views
    303

    No need to shut down. I have the board in hand...

    No need to shut down. I have the board in hand and will look at the connector. *Like I said there is conflicting information. I don’t want to cook a new MOBO. I put in a support ticket but we all...
  11. Replies
    22
    Views
    131,647

    AI suite is just an interface to the BIOS while...

    AI suite is just an interface to the BIOS while up and running which is why I don’t use it. I’ve seen a few stories of this happening after a BIOS update.*
  12. Replies
    3
    Views
    165

    Personally I’m at the staying out of the bargain...

    Personally I’m at the staying out of the bargain price end of routers when I expect high performance stage.*
  13. This is a member self help forum. Very seldom do...

    This is a member self help forum. Very seldom do you see ASUS employees posting here.*
    My advise with the intel threats?
    Disable all the patches and get yourself a decent hardware firewall an stay...
  14. Replies
    4
    Views
    112

    To my knowledge no ASUS laptop is capable of...

    To my knowledge no ASUS laptop is capable of anything past 2400 so buying anything rated higher is a waste of money. Best laptop ram Iíve seen is Gskill ripjaws 2400 in the lowest cas you can find....
  15. Replies
    10
    Views
    303

    This image shows more clearly 84328*

    This image shows more clearly

    84328*
  16. Replies
    10
    Views
    303

    Cut off two of the EPS 8 pin and you have a...

    Cut off two of the EPS 8 pin and you have a perfect match

    84342¬*
  17. Replies
    10
    Views
    303

    Thanks for your input. See attached photo of 6...

    Thanks for your input. See attached photo of 6 pin PCIE cable. The center pin near the latch is not square. It is rounded on the bottom. As stated before the rounded will fit the square hole but not...
  18. Replies
    44
    Views
    5,707

    They go back and forth and neither will take...

    They go back and forth and neither will take responsibility nor provide the drivers. Look on winraid for the F6 drivers VROC.*
    I ran it for awhile and ditched it. *OK for sequential reads and writes...
  19. VROC is intel drives only. I installed it to two...

    VROC is intel drives only. I installed it to two 900P AIC versions. The trick is to have the F6 drivers. You donít make the array for boot from the BIOS. Two F6 drivers are required at the F6 prompt....
  20. Replies
    10
    Views
    303

    Another RVIEE 6 pin EPS connector thread

    I’ve just ordered one of these boards and want to be prepared for when it gets here

    I typically like using all the power connectors.

    There is conflicting information over the 6 pin mystery...
  21. Ome way to find out for sure. try both ways and...

    Ome way to find out for sure. try both ways and see what temps you get. My experiance with the GPU on air dumping heat into the case its better to pull that heat out the other side which will force...
  22. Eventually the drivers on ASUS website wont be...

    Eventually the drivers on ASUS website wont be updated anymore and the manufacturer is all you will have. That and another good source is Station drivers.
    Most of the drivers for my board R6E on...
  23. Best pert......Monolock is GONE!!! They look good...

    Best pert......Monolock is GONE!!! They look good but perform like well, I wont write it because it will get censored.
  24. Replies
    1
    Views
    98

    Go water cooled! Very thin. Seeing how Aura...

    Go water cooled! Very thin.
    Seeing how Aura doesnt work I dont even care and mounted my GPUs vertiacally and put strips in them I can control with Ique softweare.
  25. Replies
    42
    Views
    3,920

    Good decision!!

    Good decision!!
Results 1 to 25 of 230
Page 1 of 10 1 2 3 4