Search:

Hi vcore

Have you tried both a Displayport 1.2 cable and HDMI 2.0 cable?

Have you set the refresh rate to 144Hz in the Nvidia Control Panel? You could try setting it to 120Hz.

Unless you use...

Hi dr.alwi

Are you able to change the RGB brightness on your ROG Claymore II by holding down the Fn key and pressing the up and down arrow keys?

This key cap set is compatible with the ROG...

Hi Gaia

Welcome to the ROG forum.

After enabling CSM, did you press the F10 key to save the setting?

The bios screen is usually a sign of instability, since you're not overclocking, I...

Well, apparently it was normal procedure, I wouldn't stress over it if everything is working ok.

If you have random shutdowns, then it would be time to investigate.

Hi Ipiotrowski211,

During the windows 10 install, it's not uncommon for a couple reboots.

If all is working well now, I wouldn't be too concerned.

Just so you know, you can upgrade to...

Hello,

I'm using the ROG Delta S Animate and haven't experienced lower mic volume.

There have been a few updates for Armoury Crate.

Are your mics working any better?

I've got this one too.

The KMODE EXCEPTION NOT HANDLED can be a memory related error but can also be a corrupted/outdated driver.

You could try SOC voltage at 1.15v - 1.20v Maximum. If you...

Ok so,

Looking at the specs of your psu, it says it has three 6-pin pcie cables and one 6+2-pin pcie cables, which = one 8-pin pcie power cable.

I'll post it to be sure.
...

Hi gman8336,

Welcome to the ROG forum.

Use the Armoury Crate uninstall tool from the ASUS Support Center.

Select your operating system then click "Show all", it's the third download.
...

Hi DoomerDGR8

Is everything working ok other than the vga light being on?

Have you updated to the latest bios for your motherboard?

Are you using two separate pci-e cables?

Try with...

Sure,

You get the Armoury Crate uninstall tool from the ASUS Support Center.

Select your operating system then click Show all, it's the third download.
...

I have an RGB suggestion.

I really like how you did the ROG Spatha X side buttons with thin sleek lines.

93014

I wonder if you could get the same effect with the ROG Chakram mice where the...

Hi Hoverboy,

Welcome to the ROG forum.

Unfortunately, the device page error will require a windows reinstall.

S4+S5 is enabled,

Disable ErP Ready, it should then do a single boot.

With ErP Ready disabled, your peripherals will stay lit when your pc shuts down.

It's personal preference, I let mine...

Hi deadrick5

Welcome to the ROG forum.

I get a double boot when I have "ErP Ready" enabled in the bios.

Hi dmclone

Welcome to the ROG forum.

Two easy things I'd try is..

1) With your pc powered off, press and hold the clear cmos button for 3 seconds, then try booting.

2) Update the bios...

Here is a video that may help get your ram detected.


https://www.youtube.com/watch?v=1gMsiSXmkHE

Great to hear Tekamine, thank you for letting me know.

Does clicking DRAM at the top left in red do anything?

When you installed windows 11, did you install the chipset driver?

How does device manager look, are there any missing drivers?

92966

You're welcome,

Be sure to uninstall your current version of the G.Skill software, then download it from the link I listed.

And no hurry, post whenever you get time.

Ok,

I see there is a new version and looks like it was released today.

To confirm, are you using this download for the G.Skill software?
...

Thank you

Let's see if we can get your ram detected in the G.Skill software.

It's ok to have Armoury Crate installed, just close it when using the G.Skill software.

They're basically saying...

Hi RsdFnd

Have you installed the G.Skill software?

1) Close Armoury Crate.

2) Install the G.Skill software, configure your ram with it, then in task manager. start up tab, Disable the...

You're welcome

The best I can do is have you call and talk to someone from ASUS directly from the France region.

This is the France telephone number from the ASUS "Call Us" page.

92958

Thank you

Before the update, it was showing Device Firmware version 1.00.14 as it was the current version.

All looks good after the update, you can can click "Check for Updates" once more to...