Search:

Type: Posts; User: Mosc_007

Page 1 of 6 1 2 3 4

Search: Search took 0.00 seconds.

  1. It may be a problem with the OpenCL drivers. Some...

    It may be a problem with the OpenCL drivers. Some of the newer cards are not supporting it real well as it's a pretty old standard now. Not used a lot anymore.


    Charles
  2. Replies
    47
    Views
    26,989

    If a BSOD occurs while windows is writing to the...

    If a BSOD occurs while windows is writing to the HDD it can corrupt the Data on the HDD. This can cause windows problems.

    Once you get yor system stable and no crashes its probably a good idea to...
  3. It did take me a while to upgrade from 3930k to...

    It did take me a while to upgrade from 3930k to 5930k. Expensive with new M/B and Ram as well as CPU. Going from 3930k to 4930k wasn't worth it for little performance increase. But from 3930k to...
  4. Good to hear you fixed it. But are you sure the...

    Good to hear you fixed it. But are you sure the IMC in the CPU hasn't degraded ?. That is a common problem with SB-E with too much VCSSA. And your value of 1.305 is very high for ram at 2133 Mhz....
  5. Replies
    3
    Views
    5,867

    Turbo mode is enabled or disabled depending on...

    Turbo mode is enabled or disabled depending on the CPU Mulitplier. Running a BCLK of 100 means the Turbo mode will be enabled with clock speed over 3.5 Ghz. (Multi > 35). If you use a BCLK of 125 to...
  6. Ok. The 970 should still be about 10% faster than...

    Ok. The 970 should still be about 10% faster than the 780. But it would depend on the game. Also BF4 is very CPU intensive. Could be CPU limited.


    Charles
  7. Replies
    1
    Views
    1,170

    Updated my water cooling

    I have been running my Rampage V extreme with a 5930k clocked at 4.4 Ghz with a 360mm Thermaltake AIO cooler. Temps were good. Max about 70c in heavy AVX testing. About 60c with Aida 64.

    I decided...
  8. Replies
    1
    Views
    2,671

    1.12 Vcore is absolutly safe. But the max...

    1.12 Vcore is absolutly safe. But the max suggested of 1.40 is too high for Haswell. That is for SB. I would keep Haswell below 1.30 to be safe and 1.35 if you really want to.


    Charles
  9. Why is the 970 GPU only running at 540 Mhz ? ...

    Why is the 970 GPU only running at 540 Mhz ?

    At the right GPU clock it would crap all over the 780.


    Charles
  10. Replies
    2
    Views
    1,362

    If my search of this product is correct you wont...

    If my search of this product is correct you wont be able to put an 8 core CPU in it. Currently the only 8 Core I7 (5960x) is for Socket 2011-3 Motherboard. That Lappy has a socket 1150 CPU.

    That's...
  11. Agreed the Vcore will be higher than needed with...

    Agreed the Vcore will be higher than needed with auto. But at 4.0 Ghz it won't be a dangerous level.


    Charles
  12. OK. Original release date for SB-E was 2011. They...

    OK. Original release date for SB-E was 2011. They were replaced with the 49xx Series in 2013. Almost impossable to get them now. Even the 49xx is almost impossable to get now the 59xx series is out....
  13. 4.0 Ghz should be very easy. Just change the...

    4.0 Ghz should be very easy. Just change the Multi's to 40 and leave the rest on Auto. Should work fine.

    You can play with Ram over clocking, But other than bench marking it makes very little...
  14. 4.7 Ghz is not a measly overclock for a SB-E....

    4.7 Ghz is not a measly overclock for a SB-E. It's a Very good over clock for daily use. Anything higher would be only for benchmarking and only short durations.

    You don't have to run 24/7 to...
  15. It is a nice game. But it does need a good GPU...

    It is a nice game. But it does need a good GPU for MAX settings.

    Running 2 x GTX 980's in SLI it can manage to hit 80% usage on both GPU's in some scenes. Uauly around 60-70% on Both 980's. Vsync...
  16. 4.7 Ghz is a high overclock for that CPU. The...

    4.7 Ghz is a high overclock for that CPU. The Wall usualy starts above 4.6 Ghz. After that you need to increase Vcore a LOT. You might find you need 1.45 or more Vcore at 4.7 Ghz. It all depends on...
  17. Maybe just do it as a test. If it is stable then...

    Maybe just do it as a test. If it is stable then it proves it's a CPU problem. It can be another part of the CPU not stable. Not just Vcore. Running the GPU's over clocked is putting more strain on...
  18. Just a silly question. When using 2 GPU's did you...

    Just a silly question. When using 2 GPU's did you plug in the Extra Molex plug to supply more power to the PCI-E Slots ?. It's in the lower left corner of the board.

    Also with 3000 Mhz Ram you...
  19. 4.8 Ghz is a very high overclock for this CPU. I...

    4.8 Ghz is a very high overclock for this CPU. I would try not use more than 1.30 volts to limit degradation. Maybe even slightly lower is better. The last one I setup was 1.28 Vcore at 4.6 Ghz.

    ...
  20. I have been running two Samsung 512 GB SSD's...

    I have been running two Samsung 512 GB SSD's raided for a couple of years. They run perfect. Speed is incredible. Not had any problems with them.


    Charles
  21. Replies
    17
    Views
    9,509

    Your temps are very good. I wound't worry at all....

    Your temps are very good. I wound't worry at all. Mine goes over those temps. It does depends which program you use for stress testing though.

    The difference between cores is nornmal.


    Charles
  22. Replies
    8
    Views
    3,470

    Sounds fair enough. Problem is that when Turbo...

    Sounds fair enough. Problem is that when Turbo mode is off the Cache drops to 3.0 Ghz no matter what Ratio I set in the BIOS.

    Does explain why Chino's is working. The default clock on the 5960x is...
  23. Replies
    8
    Views
    3,470

    I have speed step dissabled so the CPU is on max...

    I have speed step dissabled so the CPU is on max clock all the time. I checked the Cache speed while cinebench was running and it stayed on 3.0 Ghz. I assume its doing that because the BIOS is...
  24. Replies
    8
    Views
    3,470

    I just installed BIOS 0802. Cleared CMOS after...

    I just installed BIOS 0802. Cleared CMOS after loading and put my settings back in.

    Exactly the same problem. When I try to get a CPU Clock of 4.375 and a Cache Clock of 4.0 Ghz with a BCLK of 125...
  25. Replies
    47
    Views
    26,989

    I will check it out. Thanks. OCCT also gives...

    I will check it out. Thanks.

    OCCT also gives an Error message, even tells you which core. As long as you are only a little unstable. BSOD only occurs wtih Major instability issues. IBT also gives...
Results 1 to 25 of 131
Page 1 of 6 1 2 3 4