Search:

Type: Posts; User: dr/owned2

Search: Search took 0.00 seconds.

  1. Thread: Bios 1601

    by dr/owned2
    Replies
    45
    Views
    23,721

    Garbage BIOS. Went from 1401 to 1601 and...

    Garbage BIOS. Went from 1401 to 1601 and couldn't get a POST without using stock settings. Had to go back to 1401 and all is well. Waste of about 2 hours of reboots and changing settings. Many...
  2. A thermal pad is a thermal pad for the most part....

    A thermal pad is a thermal pad for the most part. You're not going to see any different changing it out.

    The paste on the chipset is fine...chipset doesn't produce any real heat anyways.
  3. 2 loops in technically superior but the cost of...

    2 loops in technically superior but the cost of building and upgrading and all that is doubled. 2 loops also takes up more space.

    I run dual loops, externally, and the Blackhawk Ultra. It's a...
  4. Replies
    97
    Views
    40,964

    Let me explain more. I have 5 drives. 2 2 drive...

    Let me explain more. I have 5 drives. 2 2 drive ssd arrays in raid 0 and one 4tb HDD. If I have the HDD plugged into slot 4 and an SSD in slot 5 the array will fail unless I put the array drives...
  5. Replies
    97
    Views
    40,964

    I'm still on the previous BIOS (1204?) but on the...

    I'm still on the previous BIOS (1204?) but on the RAID subject, I've noticed the BIOS doesn't seem to properly detect drives. If I don't have my drives plugged in to specific SATA ports then the...
  6. Replies
    39
    Views
    16,666

    Because Intel is releasing a...

    Because Intel is releasing a mainstream-enthusiast NVMe SSD next month and having a board that supports it would be super :)
  7. You'll hit a thermal ceiling around 1.35 or 1.4V...

    You'll hit a thermal ceiling around 1.35 or 1.4V that's assuming your chip doesn't suck.
  8. Replies
    19
    Views
    20,347

    G.Skill Ripjaws 4x8Gb 2400. Benchmarks like a...

    G.Skill Ripjaws 4x8Gb 2400. Benchmarks like a monster:

    http://s15.postimg.org/43rzh9rcb/Untitled.png

    Read and write speeds are higher than Corsair's DDR4-3200:...
  9. Replies
    30
    Views
    12,744

    One of the things that I don't like with "Auto"...

    One of the things that I don't like with "Auto" is I'm never really sure how far you guys scale it up or what sort of customer you have in mind. Do you guys see me coming where I'm aiming for 5 Ghz...
  10. They should offer the add-in card free to people...

    They should offer the add-in card free to people who early adopted such a premium board.
  11. I flashed this BIOS and everything still works...

    I flashed this BIOS and everything still works fine for me. Win 7 with 2 raid 0 arrays. I skipped the previous BIOS though so I went from something like 1001 to this one.

    Also, this BIOS fixed...
  12. Sticky: I don't get it. Is the bottom line suggestion...

    I don't get it. Is the bottom line suggestion that G.Skill (or any of them) are burning XMP profiles that might be the same "big 4 timings" like 15-15-15-30, but the subtimings are different between...
  13. I have this PSU. You plug it in wherever it fits...

    I have this PSU. You plug it in wherever it fits and it works fine. Of the top of my head, one of my 8 pin cables is plugged into slot #1 and the other 8 pin cable split apart is plugged into slot...
  14. Replies
    4
    Views
    2,053

    I know it's not officially supported, that's why...

    I know it's not officially supported, that's why I'm asking here. Is it unofficially supported or is it purposely gimped out of the BIOS?
  15. Replies
    4
    Views
    2,053

    Can the RVE make use of ECC memory?

    Pretty simple question, would the board work with ECC memory if I wanted to ensure no memory errors happen?
Results 1 to 15 of 15