Search:

Type: Posts; User: vmanuelgm

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    110
    Views
    7,089

    The temperature of the VRM's of the Encore with...

    The temperature of the VRM's of the Encore with the stock cooler are better than first Rampage VI for example. But VRM temps depend on the kind of loads and overclock u are applying.

    More...
  2. Cpu cores and mesh at stock??? Seems so... 50...

    Cpu cores and mesh at stock??? Seems so...

    50 degrees at stock in bios??? Very high temperature for cpu in this case...

    1.20v for vccio and system agent for 3000MHz??? Quite high, even for...
  3. 2x8pin=more amps to cpu!!! Have some airflow...

    2x8pin=more amps to cpu!!!

    Have some airflow to VRM or waterblock and u are done!!!
  4. Replies
    336
    Views
    28,323

    Good or bad performance??? I tried CPU-Z and...

    Good or bad performance???

    I tried CPU-Z and result is similar (a bit lower) to 1909...
  5. Please post captures of your inbios memory setup...

    Please post captures of your inbios memory setup to see all the values applied...
  6. The cpu should throttle to maintain amps limits....

    The cpu should throttle to maintain amps limits.

    When u have your 18c installed, u can try 4.7GHz avx offset 0 (or higher) with Intelburn in very high and HT Off in bios, with HWInfo64 opened. U...
  7. Nope, u can overclock your future 18c until your...

    Nope, u can overclock your future 18c until your 8+4 eps limit amps.

    Rampage VI Extreme also needs VRM watercooling to maintain high loads during an extended period of time to avoid throttling.
  8. Replies
    110
    Views
    7,089

    It ends in 12c...

    It ends in 12c...
  9. I should go the B-Die route, as I said to u via...

    I should go the B-Die route, as I said to u via PM. 3600CL16 quad non RGB gskills are a nice suit for Omega. U can also try the new Encore to see if it helps.

    But if u stay with Omega and your...
  10. Replies
    110
    Views
    7,089

    @tistou77 Westlake uploaded a new 50657...

    @tistou77

    Westlake uploaded a new 50657 microcode version 12c, maybe it can help. Or maybe CPU-Z must be updated, since 10980xe is recognised as 9980xe.

    By the way, I have been testing your...
  11. Replies
    110
    Views
    7,089

    Where do u think the problem is, tistou77???

    Where do u think the problem is, tistou77???
  12. Replies
    110
    Views
    7,089

    7980xe avx512 at 4.4GHz: ...

    7980xe avx512 at 4.4GHz:

    https://i.imgur.com/zpl1m0Y.png
  13. Restsugavan, a mate here in the forum, said they...

    Restsugavan, a mate here in the forum, said they are coming soldered.

    Same according to guru3d review:

    https://www.guru3d.com/articles-pages/intel-core-i9-10980xe-processor-review,24.html
  14. Replies
    336
    Views
    28,323

    @tistou77 or any other mate using MC 49 in their...

    @tistou77 or any other mate using MC 49 in their Rampage Bios, have u tested avx512 loads (y-cruncher for example) along with your OC's with this microcode???


    EDIT: I answer myself, MC49 is...
  15. Your cpu will not consume as many watts as the...

    Your cpu will not consume as many watts as the 10980xe, but if u push it hard with OC (to 5GHz or more) and use renders or AVX, your power supply could fall short. A 2080Ti overclocked with shunt mod...
  16. Replies
    5
    Views
    135

    If u are gonna push the cpu under LN2, yep....

    If u are gonna push the cpu under LN2, yep. Otherwise, u only need both 8pin.
  17. Omega likes B-Die single sided modules, a total...

    Omega likes B-Die single sided modules, a total of eight cos of T-Topology. So 8x8GB B-Die should reach the best performance.

    tRC is not usually displayed in Asus Bios's. Other manufacturers like...
  18. Replies
    336
    Views
    28,323

    @Mreksoll Which memory modules are u using on...

    @Mreksoll

    Which memory modules are u using on Omega??? I understand your capacity right now is 128GB. EDIT: Saw your other post and u have Kingston 128GB, with a pair of XMP's, one at 2400 and the...
  19. Replies
    336
    Views
    28,323

    4.8avx but 4.2avx512. Realbench 2.56 doesn't use...

    4.8avx but 4.2avx512. Realbench 2.56 doesn't use avx512...

    I use a delidded 7980xe with Direct Die and watercooling.
  20. Have a look at Elmor's post 149 in this thread: ...

    Have a look at Elmor's post 149 in this thread:

    https://www.overclock.net/forum/6-intel-motherboards/1632665-intel-x299-socket-2066-vrm-thread-15.html

    Summing up, for high core count like...
  21. Replies
    336
    Views
    28,323

    Owner of the Omega here without a single problem...

    Owner of the Omega here without a single problem since release date... Today passed a RB to reach 40 hash matches at 4.8avx-32mesh-3800CL15 (30minutes 32GB):

    https://i.imgur.com/HZN6QYb.png

    ...
  22. Replies
    336
    Views
    28,323

    Ok, thanks.

    Ok, thanks.
  23. Replies
    336
    Views
    28,323

    Ok, thanks. MC60 is not protecting against...

    Ok, thanks.

    MC60 is not protecting against this new vulnerability, I guess...
  24. Replies
    336
    Views
    28,323

    Was it you who said MC 65 was a beta??? ...

    Was it you who said MC 65 was a beta???

    Problems with CSM Module??? Didn't know, who told u that???
  25. Replies
    336
    Views
    28,323

    Thanks for the info. Have u tried MC 65 in...

    Thanks for the info.

    Have u tried MC 65 in your rig??? Are u able to boot Windows/Linux with MC 65???
Results 1 to 25 of 232
Page 1 of 10 1 2 3 4