Search:

Type: Posts; User: XYchromosone

Page 1 of 11 1 2 3 4

Search: Search took 0.01 seconds.

  1. you haven't said what version of AI Suite you...

    you haven't said what version of AI Suite you have installed
  2. have you tried resetting the modem? there is a...

    have you tried resetting the modem? there is a reset button that you press for some seconds with a paperclip or a toothpick. the adim and password will be reset to default, which should be written on...
  3. Replies
    8
    Views
    2,340

    It's a pitty that ASUS doesn't seal the box in...

    It's a pitty that ASUS doesn't seal the box in plastic so that no one can take out any parts.
  4. I think your plan build is difficult to improve...

    I think your plan build is difficult to improve on. It seems more than sufficient for what you want to use it it, and it should be good for some years to come. Your choice for fans and AIO...
  5. Replies
    3
    Views
    124

    As I said a non k CPU can only be OC by...

    As I said a non k CPU can only be OC by increasing the BLCK. The RAM can be OC either manually . Or by XMP, followed by tightening the Primary, Secondary and Tertiary timings including RAM voltage....
  6. Replies
    7
    Views
    448

    It's pretty difficult to remove completely. After...

    It's pretty difficult to remove completely. After uninstalling, you also have to followup with the registry to delete many keys that only an Advanced use should attempt. In a nutshell once you type...
  7. when my older Maximus VIII Hero put out error 00...

    when my older Maximus VIII Hero put out error 00 it also had a lit CPU LED, and i learned that the CPU an i7 7700k was dead. My retailer exchanged it for a new CPU and it fixed that problem.

    A...
  8. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    789

    Please keep us updated

    Please keep us updated
  9. Replies
    3
    Views
    124

    I believe you can only overclock a non k CPU by...

    I believe you can only overclock a non k CPU by increasing BLCK, but you can not change multiplier. You might be able to change voltage to CPU but I am not sure, it has been a few years since I used...
  10. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    789

    @pndiode that's a nice tool kit that should...

    @pndiode

    that's a nice tool kit that should make the job of straightening bent pins easy.
  11. Replies
    13
    Views
    1,017

    My pleasure to be able to help you. Although this...

    My pleasure to be able to help you. Although this is a band aid approach, for it is best to actually resolve the actual problem than to suppress the service. Yes repairs are best done as an...
  12. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    789

    Just how many pins are bent? can you count them...

    Just how many pins are bent? can you count them accurately? If it's only a few pins, like 2 to 5 then why not give it a go at straightening them yourself. After all, they are already bent, so really...
  13. Replies
    13
    Views
    1,017

    A permanent solution is to stop the service from...

    A permanent solution is to stop the service from starting. There's a setting in "Task Scheduler" which calls the NahimicSvc32.exe service to start on Windows startup/logon, that you can delete....
  14. Replies
    10
    Views
    2,710

    try 1.35v for the Additional Turbo Mode CPU...

    try 1.35v for the Additional Turbo Mode CPU voltage
  15. Replies
    18
    Views
    694

    VCCSA @ 1.36v is high... definitely go manual and...

    VCCSA @ 1.36v is high... definitely go manual and use lower voltages.

    Update: I didn't realize you are running Team Group Xtreem 4133 c18. This runs at a higher voltage than 1.35v when OCing. I've...
  16. have you tried a different connection from GPU to...

    have you tried a different connection from GPU to your monitor, such as DisplayPort or HDMI? It might be a graphics driver problem. Maybe try a previous version of the nvidia driver.
  17. I suggest to get a 10 K ohm thermister [the...

    I suggest to get a 10 K ohm thermister [the common PTC or "Positive Temperature Coefficient" type] and plug it in to a 2 pin extension heat sensor input on your mobo, which I would think actually has...
  18. Replies
    1
    Views
    231

    I guess you already know that 7A to 7F q codes...

    I guess you already know that 7A to 7F q codes are reserved for future AMI DXE codes. So that is of no real help here. What RAM voltage are you using? If it's from the XMP profile it would be 1.35V @...
  19. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    789

    I'm not sure how you're going to clean out the...

    I'm not sure how you're going to clean out the liquid metal? Actually you could use a suction tube that you could put together using a vacuum cleaner e.g. I've made one in the past by taping a length...
  20. My max XI code and extreme do not have the...

    My max XI code and extreme do not have the D.O.C.P. setting in the UEFI?

    Update: I thought you had an Intel mobo, it's AMD based hence why you have D.O.C.P. in the BIOS and my Intel CPU based mobo...
  21. @Falkentyne Yes i installed windows from...

    @Falkentyne
    Yes i installed windows from scratch on both systems. If i hadn't done that and i experienced such lag all the time the first thing i would do is reinstall Windows.

    @MrAgapiGC
    I...
  22. anyone else finding Maximus XI Code / Extreme sluggish?

    I've recently [regrettably] upgraded 2 systems from a Maximus X Hero to the Maximus XI Code and Extreme. Both systems are running quite slow compared to the previous hardware. opening Windows File...
  23. Thread: Bent pins

    by XYchromosone
    Replies
    18
    Views
    789

    I purchased a Maximus XI Code locally but I had...

    I purchased a Maximus XI Code locally but I had to leave it for about 2 months before I could use it for I had to go to hospital due to an illness. When I got to checkng out the mobo, it already had...
  24. try turning off the power from the wall socket to...

    try turning off the power from the wall socket to the psu for 30 seconds. Then see if it stops the boot-to-BIOS loop.
  25. there are so many members complaining about BIOS...

    there are so many members complaining about BIOS 1401 giving them problems. Yet 1302 is working ok for these members, so i understand. I guess ASUS engineers are working on this and hopefully come up...
Results 1 to 25 of 251
Page 1 of 11 1 2 3 4