Search:

Type: Posts; User: RedSector73

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. +1 usb, then via bios flash utility.

    +1 usb, then via bios flash utility.
  2. base clock is 100x38 = 3800 you have spread...

    base clock is 100x38 = 3800 you have spread spectrum on giving your 99.77 and not sure about why you have 37.25 multiplier. I also don't recognise the program, perhaps check with HWinfo to confirm.
  3. Replies
    4
    Views
    196

    You could try using snappy driver installer, good...

    You could try using snappy driver installer, good at getting most optimal driver for your system, use the lite version https://sdi-tool.org/download/
  4. Replies
    417
    Views
    68,914

    Your confused. I never had or said I have...

    Your confused. I never had or said I have overheating issue. Thank you for the information provided.
  5. Replies
    417
    Views
    68,914

    I don't use the method on which you ditch and...

    I don't use the method on which you ditch and never said I did.

    I read your post(s) on TIM.

    Here what I take away from your posts.
    (1) No TIM going to be an issue for you (of which you...
  6. Is the CPU light red as well? Typically Qcode...

    Is the CPU light red as well?

    Typically Qcode 00 means the CPU is not initialising. While that is simple, the solution is not so simple, as it can be many things.
  7. Replies
    417
    Views
    68,914

    And this ...

    And this

    https://www.youtube.com/watch?v=nWu2tcm4wL8

    I have better temps than you must be better at TIM than you - or could it be something else cools my cpu and it just does heat transfer...
  8. Replies
    417
    Views
    68,914

    Can you stop with your unproven method of...

    Can you stop with your unproven method of ditching everything based on your own limited exposure to Ryzen. How many of these systems do you own or have you built ?

    You seem quite young or naive...
  9. Buddy, I know your pain, sounds like what i went...

    Buddy, I know your pain, sounds like what i went through with my old i7-980x.

    Then I jumped ship 1800x which was like 2xbetter, I have 2700x and see my current spec which you would love. Come to...
  10. Replies
    417
    Views
    68,914

    ROTFLMAO any method is fine. I prefer a layer...

    ROTFLMAO any method is fine. I prefer a layer spread over the chip but apart from not using TIM this is total crap. Method does not matter that much.

    ...
  11. Replies
    4
    Views
    196

    It sounds like a problem with front audio ports...

    It sounds like a problem with front audio ports of the case itself rather than motherboard. What case is your motherboard in ?
  12. Replies
    1
    Views
    92

    Off top of my head. It sounds like dead short....

    Off top of my head.

    It sounds like dead short. If you remove the power cord from the PSU, wait minute or two, plug back in and it starts - great but you have random dead short (not great). If it...
  13. Replies
    5
    Views
    75

    No problem. Enjoy your new system ;)

    No problem. Enjoy your new system ;)
  14. Sorry I speak english only. Have you looked at...

    Sorry I speak english only.

    Have you looked at reliability monitor history to see why this happened ?

    In search type 'reliability' and view reliability monitor will show up, have a look through...
  15. I checked the nvme passes with two different...

    I checked the nvme passes with two different benchmarks at various speed tested above and they both show a normal linear growth with speed increases along with the RAM.

    Not sure why userbench is...
  16. Replies
    5
    Views
    75

    Here 83354 Top applies to your system since...

    Here
    83354

    Top applies to your system since running a 3000 series CPU. Yes it will be GEN 3.0 because that is your graphics card (2080ti). Even if x8 x PCIE Gen 3.0 the 2080ti is not enough by...
  17. Replies
    5
    Views
    75

    Page 1-8 of your manual at the top. The second...

    Page 1-8 of your manual at the top.

    The second will be will be x8 (which should be more than enough) the 2080ti does not come close to using that level of bandwidth.

    Only the first (x16_1) is...
  18. 3900x Samsung B-die 3600, 3666, 3733, 3800 Overclocking Adventures

    The results are from testing the Ryzen Dram Calculator Fast Settings on Samsung b-die certified 4133 at various speeds.
    Ryzen 3900x with Ram 2x8 PVR416G413C9K...
  19. Replies
    3
    Views
    325

    You can save settings from the bios to a file...

    You can save settings from the bios to a file before you update. It on the same page as the update utility just further down (highlighted in green), excuse the quality of the picture I had to grab...
  20. Replies
    3
    Views
    325

    Bios your on is extremely old and maybe the cause...

    Bios your on is extremely old and maybe the cause of the issues with windows 10. I would move to latest one 7601, I actually moved to beta above this recently from 7201 for the board and 2700x. If...
  21. Seems identical to last one, I have applied it...

    Seems identical to last one, I have applied it and can't detect anything different or better/worse.

    BIOS Type: AMI UEFI
    BIOS Version: 1201
    AGESA Version: Combo-AM4 1.0.0.4
    SMBIOS Version: 3.2...
  22. Replies
    20
    Views
    2,322

    Beta BIOS for ASUS x370 x470 Motherboards AGESA...

    Beta BIOS for ASUS x370 x470 Motherboards AGESA 1.0.0.4(b)

    CROSSHAIR VI HERO: http://www.hwinfo.com/beta/ASUS/CROSSHAIR-VI-HERO-ASUS-0001.7z
    CROSSHAIR VI HERO WIFI-AC:...
  23. Replies
    53
    Views
    15,152

    New bios out for CH8 Version 1201 2019/12/03 ...

    New bios out for CH8 Version 1201 2019/12/03

    01. Fix a compatibility issue with the ASUS-ESTX II-0074 sound card
    02. Update TCGStorageSecurity Module to support TCG Pyrite 2.0 Devices.
    03. Fix...
  24. Get DDU and safemode uninstall your graphics...

    Get DDU and safemode uninstall your graphics drivers with it and then reinstall nvidia latest driver.

    Try changing the anisotropic setting from x16 to x8 and see if the issue persists.
  25. Replies
    3
    Views
    109

    Ryzen 4000 is on track on 2020 launch rumors...

    Ryzen 4000 is on track on 2020 launch rumors suggest will be long before end of 2020.
    https://www.digitaltrends.com/computing/amd-ryzen-4000-rumors-news-specs-features-price-release-date/
Results 1 to 25 of 317
Page 1 of 13 1 2 3 4