Search:

Type: Posts; User: edrickjk

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    8
    Views
    254

    Fresh install is the easiest way i found, to make...

    Fresh install is the easiest way i found, to make everything work properly.
    - Download the latest window build ,
    -reset cmos,probably not needed but i always do,make sure armoury option is on in...
  2. Replies
    4
    Views
    245

    9600k turbo boost at 4.6, k, if it bsod at stock...

    9600k turbo boost at 4.6, k, if it bsod at stock setting you have other issue to deal with.Is it overheating when it crash? Did you do any config in your bios or you left everything stock?
  3. They have an ssd toolbox on their consumer...

    They have an ssd toolbox on their consumer site,its worth the try , if im not wrong they do use a separe tool to do the flash,its not integrated in their toolbox.

    had this append before on an...
  4. On the last couple build i had, 2 adata where...

    On the last couple build i had, 2 adata where doa, had 1 samsung doa, 2 wd ........ no hardware is exempt of a bad batch or manufacturing defect.

    Hence why im telling him to try in another...
  5. I see lots of post lately with adata drive...

    I see lots of post lately with adata drive issue,maybe these a compatibility issue with asus board. IF you can access another computer could you try to update the drive firmware before trying it...
  6. I always say to buy the highest capacity you can...

    I always say to buy the highest capacity you can within your budget . You can use them for everything as long a decent quality one, its great for the os since it reduce boot time . Great for video...
  7. You can remove the optical drive cage,it would...

    You can remove the optical drive cage,it would clear the space you need for your aio then. If you absolutely need a dvd drive,external usb one are dirt cheap these day.
  8. Replies
    4
    Views
    152

    Yes both will have a different version,there 2...

    Yes both will have a different version,there 2 physical bios chip on the board. I like to keep one untouch and only do the update on the second one.
  9. Replies
    3
    Views
    139

    Here you go,damn i hate that bracket lol ...

    Here you go,damn i hate that bracket lol


    https://www.ebay.ca/itm/NEW-ASUS-MOTHERBOARD-M-2-BRACKET-SSD-HARD-DISK-HOLDER-13MB0TYIAM0101-D458/143328088836?hash=item215f051304:g:9zEAAOSw5QJc4alk
  10. Page 3-19 of your motheboard user manual, ...

    Page 3-19 of your motheboard user manual,

    Sata is the interface of your 2.5 hd,you have a total of 6 port ,enabling your m.2, at 4x will disable port 5 and 6.

    You have 2 m.2 port both support...
  11. You will be fine, the m.2 lane are tie to the...

    You will be fine, the m.2 lane are tie to the chipset. If you set it at 4x sata 5 and 5 will be disable the the 4 other port will still work. If you dont mind me asking why the usb controler card ?
  12. Replies
    7
    Views
    1,054

    The only way i found to deal with armoury crate...

    The only way i found to deal with armoury crate is with a fresh window install, to stay away from ai suite ,aura and and any other asus software,they seems to conflict with each other. If any of...
  13. Plenty of people did,you can check on...

    Plenty of people did,you can check on pcpartpicker, i would not worry about the fitment.
  14. There so many good case lately, my pick would be...

    There so many good case lately, my pick would be phantek eclipse 400A, NZXT H710,Fractal meshify c and lastly lian-li pc 011 dynamic.
  15. They binned the cpu for frequency not for the...

    They binned the cpu for frequency not for the memory controler, you might have lost the silicon lotery. I would write down your stock memory setting and set them manually without xmp ,you will need...
  16. Replies
    6
    Views
    582

    Anything under 1.4v is safe,but will generate...

    Anything under 1.4v is safe,but will generate heat.Considering your cpu is binned you should technically be able to do bellow 1.3v. Start with stock setting run bench like prime95, several run of...
  17. Sorry for the late reply,but what kind of water...

    Sorry for the late reply,but what kind of water block are you using?i forgot that i Had issue with my strix and a ekwb block.Maybe you are experiencing something similar ?
    ...
  18. Replies
    1
    Views
    212

    Uninstall and forget it ever existed, go install...

    Uninstall and forget it ever existed, go install afterburner and just select third party in the option. Im dreaming of the day asus make software on the level of their hardware,aint happening...
  19. Try the second bios, keep in mind your memory...

    Try the second bios, keep in mind your memory controller in on the cpu and it might not like higher frequency,or might need more voltage . When you will find an acceptable setting for your ram,turn...
  20. It will work ,i was running my 9900k on my x code...

    It will work ,i was running my 9900k on my x code with no issue. You will most likely need higher voltage , my x code needed 1.34v to be stable at 5 all core . My maximus extreme on z390 only need...
  21. I would suggest to desinstal gpu tweak it...

    I would suggest to desinstal gpu tweak it probably will fix your issue.
  22. Replies
    9
    Views
    449

    It wont if you use the last pcie slot,its tie to...

    It wont if you use the last pcie slot,its tie to the chipset.

    Do you see the drive in the bios? You might have to update your drive firmware, what version of bios are you using? 1005 fixed ...
  23. Antenna is in the lid its possible it would...

    Antenna is in the lid its possible it would affect the signal when close. I would check in your power sleep setting,its highly possible that your wifi switch to low power when the lid is close .
  24. Try without it, when i bought my 2080ti i had...

    Try without it, when i bought my 2080ti i had strange issue like this using the cooler master riser, switched to the lian li i had with my case,same issue. Cable mods was the only one working in my...
  25. Are you using a riser card by any chance ?

    Are you using a riser card by any chance ?
Results 1 to 25 of 70
Page 1 of 3 1 2 3