Search:

Really darkdavid, What are you trying to achieve. Are you going for bragging rights or a reliable and stable well performing system with gaming in mind.

I have tinkered with my 2700x and also...

The following tells me you don't fully understand what happens when you power on your system.

1. Quote: Q-code streaming codes so fast you cant read them, End Quote.
Yes POST (Power on self...

Thanks for reporting back Sergio :) Glad you have it sorted.

Hi TwitchFast ;) and Welcome to ROG

Your RAM (CMK16GX4M2B3200C16) are OC RAM which is beyond the JDEC standard and therefore will default to a safe set of SPD values.
To obtain the rated...

Hi Sergio and Welcome to ROG.

Ryzen is picky with OC RAM (3200MHZ is OC RAM) which means there is no D.O.C.P profile, so your system will default 2133MHz as a safe set of SPD (Serial Presence...

That's good you sorted the problem Kritikill :D
Did you get your RAM working at it's rated frequency OK?

Because OC RAM come with many varying SPD (Serial Presence detect) values, there is no simple "one set off values" fits all. Much depends on the Systems hardware capability ie: PSU, CPU,...

Your RAM are rated at 3200MHz therefore they are OC RAM. Profiles such as XMP and D.O.C.P don't work as 3200MHz is above the JDEC standard. Your Bios would set for a lower safe frequency and to reach...

Hi Craftprinces :)

Is your MB ROG STRIX X470-I GAMING? If so then yes the orange lit LED is a problem with RAM.
Removing all RAM would not test your RAM and would indeed throw an error.
Test...

From your photo, I can see your Boot_led is lit and this is because you have either no Storage device installed or something is wrong with it, either improper connections or the unit or adapter is...

DIMM slots are for RAM modules, review your MB Layout again as they have nothing to do with your storage drives.
Check your SATA connections for the correct connections (page 1-23 in your MB...

HI apocalypzez :)

POST cycle will not continue until the error with your HDD or SSD is fixed and you will continue to get QCODE A2. You will receive an A2 error if you do not have any drive...

Intel speed step is used by tree huggers to save a little power when at idle. It is usually on by default. Clever tech for what it does.
As a power user I have disabled it (as well as C1E sleep...

G.SKILL 16GB KIT DDR4 3200MHz CL14 Flare X for AMD is OC RAM and therefore D.O.C.P profile will not work as they exceed the JDEC standard.

If you check with CPUz in Windows (or the Tools section...

Go into your Bios>Extreme Tweaker menu>AI overclock Tuner and set to manual. This will allow you to change your multiplier.
You can bring your Bios back to default by removing the MB CMOS battery...

I think your misunderstanding a few things Tony.

Your 3200MHz RAM would default to 2400-2666MHz initially as 3200MHz is beyond the JDEC standard and therefore you will have to manually enter your...

:
Who told you that :mad: cause here's my one hundredth time stamp for "ACCESS DENIAL"
Access Denied

timestamp: 2019-07-01 10:53:09
event ID: 1135950231649268773910918305311897569673...

QCODE 00 is a hardware error and not necessarily a CPU error. It has also been found to be due to DIMMs training/failing or poor cabling conditions. In fact I have seen many posts determining it to...

Yes those temperatures are abnormally high. Always best to list your full system specs with these type of issues.

First ensure the H100i pump is indeed operational and the heat sink brackets are...

I'm now marking all threads where Access Denial comes up with the following. "Unable to respond due to ACCESS DENIAL".
It seems to be due to certain characters or by the size of the post, not sure...

Unable to respond due to ACCESS DENIAL.

There is a Forum bug denying access to some threads, Why this is happening, well we don,t know and it's been happening for a while.
I tried to respond with information for you without success. There...

unable to address your issue due to access denial

Hi joseleg :)

Qcode 00 is not documented and generally considered to be a hardware fault found error, and difficult to diagnose the hardware culprit, however:

Quote/ I test outside the case...

When you hit the Power button to turn on the system, It goes through Post (Power on self test) where your hardware components are interrogated. Once all is OK then it boots to your OS. As your yellow...