Search:

Is it a combination of this driver and Win 10 version 1809, Windows updates have been causing issues that are difficult to identify

lol Rob W.

I haven't seen Nodens around the forums for a long time, he created RB and updated it for new hardware from time to time,
who has a system from a couple generations back to see if...

I have always left on what the default is in CP. but you can always try both ways to see if you can tell a difference

What a difference a chip males

I have always left on defaults #1

I didn't ask if you'd tried any of the memory presets in the bios, that can be a good place to start, I am using Raja's 4133 c17-18-18-1T preset but had to change timings to 18-18-18-2T to get 100%...

DooRules, lol, neither score makes it in the top 100 Hall of Fame

I believe that the LED's on RAM modules do not turn off with bios or AURA settings

1.35 volts is fine, sounds high for 3600 mhz but probably because it's the 2X8 -16GB modules

My 2x8 GB - 16GB 4500mhz kit @4266 18-18-18-38-2 is stable with VCCIO 1.328v, VCCSA 1.344v. That is...

Is there XMP and XMPI or II option for XMP, if so try them both, leave VCCIO and VCCSA settings on auto and let the bios set needed voltages (tune later after your sure of stability if you want),...

3DMark benchmark for those who have Nvidia RTX cards is now available if you have the Advanced version of 3Dmark

My score with following hardware and no Windows tweaks
CPU 9900K @ 5.2 AVX -2 AIO...

I have recently had the same issue with Sonic Studio interface sometimes opens fine, sometimes it is just solid red, may have something to do with new drivers and latest windows updates
...

golfleep,
Thanks for the info buddy

So this has been that little issue, I also have noticed some similar issues, including Microsoft Solitaire not opening fully

There is a thread about Realtek drivers that has some information about...

mdzcpa, good advice, my personal experience using a 360 AIO, 1.35 volts is about max under load as temps will get very high

Philly,
Thanks, wasn't interested in difference in new board except how CPU reacted on X to XI, I have no new hardware and am thinking in swapping my CPU's 8700K, 9900K, on my boards, XI Gene and X...

You need to monitor voltages and temps at idle and under load, use ASUS RealBench to stress test your system, voltages will vary during use from what is reported in the bios

78083

78084

My...

runningdodo,
Thanks for the info
I have been thinking of swapping CPU's from my X Apex and XI Gene, only because of the extra pcie slots, I have a Sound Blaster AE 5 sound card that I really like...

Try disconnecting all drives except OS drive, is your games on a separate drive? try mouse in different USB port, do you have an extra mouse to try?

You say no overclock, is bios set to defaults (F5) no XMP?
Try one stick of memory at a time to check if you have a bad memory module

I had a Hero that did the same thing, I flashed all the way back to original bios and worked my way to latest without any luck, if you can return to retailer or RMA would be the best thing to do as...

Zammin,
Thanks I forgot about that thread

Philly,
Any difference on the XI E board compared to the X board you first used with the 9900K? Voltage or OC, etc.

Who is running a Gen. 9 CPU on a Maximus X Z370 motherboard

Any issues? How is your overclocking results?

Thank you for posting back your solution, this may help someone else

Plus Rep for you