Search:

Type: Posts; User: jqpdev

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Update: I ended up getting 32GB of DDR4 3200...

    Update:
    I ended up getting 32GB of DDR4 3200 RAM. Its a G.Skill Trident Z RGM 4x 8GB kit (F4-3200C16Q-32GTZRX) from Amazon at $209.99 with free shipping. Unfortunately, G.Skill hasn't gotten...
  2. 32GB 3600Mhz RAM needed for Crosshair 7 Hero + 3700x

    Hello all,

    I'm going to build a system with Crosshair 7 Hero Wi-Fi (x470) paired with Ryzen 7 3700x. I'm looking for 32GB of 3600Mhz RAM that can run at the 3600 speed without overclocking on my...
  3. I would not "give" LN2 to youngsters but as a...

    I would not "give" LN2 to youngsters but as a teaching tool in a classroom/lab, with proper knowledgeable adult supervision, it can be quite good. Yes, most teens/pre-teens would focus on gaming on...
  4. Ok I pulled down AIDA64 and RealBench. I...

    Ok I pulled down AIDA64 and RealBench. I followed along in OC Walk through video.
    CPU = 4Ghz
    RAM = 2400 Mhz
    CPU voltage offset = 0.02500
    LLC = Level 1

    I selected the 15 min. duration in Real...
  5. You are correct in that my OC ideas are...

    You are correct in that my OC ideas are optimistic. A LN2 setup would be a fun experiment and teaching tool for some young elementary/middle/high school students (mostly to wet their palette for...
  6. Unknown, Thanks for the youtube link. I...

    Unknown,
    Thanks for the youtube link. I watched that video and immediately followed it up with => ASUS B350 & X370 Ryzen Overclocking Walkthrough

    Its a Ryzen OC Walkthrough with J.J. Guerrero...
  7. Replies
    1
    Views
    3,079

    Ai Suite & other Mobo Utils for Linux please

    Folks at Asus,

    Can we please get Linux support at the same level of Windows? I'm on my 5th Asus motherboard since 2001/2002 (3 others purchased for friends/family members). That is a total of 8 ...
  8. I have no idea what level 4 LLC is. I have the...

    I have no idea what level 4 LLC is. I have the CPU set to default with 37x multiplier in BIOS thus razing the speed to 3700 Ghz. I recently switched the DRAM from default of 2400 to 3200 in BIOS...
  9. Ryzen 7 1700x CPU Temps & Speeds w/ Crosshair VI Hero (Wi-Fi AC)

    Hello everyone,

    I'm working on finishing up my new Ryzen 1700x build and was wondering what CPU temps and speeds (low, medium, and highest) you guys were able to achieve? I'm using an AiO...
  10. Linux Install advice needed for Maximus VI Formula mobo user

    Hello all...

    I'm going to be installing Linux Mint v17.3 64bit Cinnamon Edition on my PC. I have a separate 1TB SATA ready for it. I'm concerned about hardware compatibility though.

    Does...
  11. Win 10 advice needed for Asus MAXIMUS VI FORMULA mobo user

    Hello all,

    Its been quite a while since I've posted on these forums. I currently have multiple Win7 Ultimate installs working properly. However, I'm going to be installing
    64bit Windows 10. I...
  12. On Tuesday, Feb. 4th, I spoke with a tech named...

    On Tuesday, Feb. 4th, I spoke with a tech named Wade. He said that there are no level 2 techs. He looked at the ticket and this thread. As per Wade's instructions, I filled out a motherboard test...
  13. I contacted tech support again with info....

    I contacted tech support again with info. regarding the same erroneous behavior with the 2nd M6F board and the tech suggested that I speak with their level 2 technical staff. Unfortunately the L-2...
  14. Could the CSM settings be apart of the problem?...

    Could the CSM settings be apart of the problem? See below



    Below shows how I would like to have the partitions set.


    I created the partitions on the WD 1.5TB HD (disk 2 in the pic above) on...
  15. Well no success thus far. I've either...

    Well no success thus far. I've either encountered a flaw in the UEFI specification, a flaw in the UEFI implementation, a bug in the SATA controllers, a bug in Windows 7, or I have something...
  16. Both the Seagate 1 TB and Western Digital 1.5 TB...

    Both the Seagate 1 TB and Western Digital 1.5 TB HDDs are recognized separately and together. I created a partition on the 1TB drive and copied a few small files and directories.

    Below is a pic...
  17. I decided to stick with the Maximus 6 Formula. I...

    I decided to stick with the Maximus 6 Formula. I contacted Newegg and they were kind enough to issue me a rapid RMA. I have the replacement board and the board that was having trouble. So here is...
  18. Welcome to the Twilight Zone and here is the...

    Welcome to the Twilight Zone and here is the latest update...

    The Western Digital tech gave me instructions to use a diagnostic tool to check the drive. He also offered to replace the drive free...
  19. I contacted Asus Tech Support and they were...

    I contacted Asus Tech Support and they were unable to come up with a solution. However, the tech. hinted at a possible compatibility issue and suggested that I contact Western Digital. I'm on hold...
  20. I downloaded and installed BIOS ver 1302 and did...

    I downloaded and installed BIOS ver 1302 and did a clear CMOS after the new BIOS was loaded. Once I shutdown and reconnected the Western Digital drive the PC hangs at the RoG logo so, I'm still...
  21. I tried cable swapping but that failed. I can...

    I tried cable swapping but that failed. I can access the drive to copy the data off, but that is only a temporary solution. I need the storage available directly in the M6F PC. I have BIOS ver...
  22. No OSes on the Western digital drive. All...

    No OSes on the Western digital drive. All partitions on all drives are NTFS. 3 of the partitions on the western digital are primary partitions, but none are marked as active. No bootable...
  23. Ok here are the results... WD 1.5TB connected...

    Ok here are the results...

    WD 1.5TB connected to Asmedia Port-1 (all other drives disconnected PC) = Stuck @ RoG Logo
    WD 1.5TB connected to Asmedia Port-3 (all other drives disconnected PC) =...
  24. I haven't changed anything yet... The HDDs,...

    I haven't changed anything yet...

    The HDDs, SSD, and DVD Burners are on the Intel SATA ports. Only the chassis' top mounted hot-swappable SATA port is connected to the ASMedia. Also, I went...
  25. Thanks for the suggestion KKN. I will have to...

    Thanks for the suggestion KKN. I will have to give that a try. Is the Intel controller known to not play well with HDDs or HDD + SDD combinations?

    Oh and the western digital drive had all...
Results 1 to 25 of 33
Page 1 of 2 1 2