Search:

Are you running CSM module in the BIOS, this should be disabled.

and agree full specifications help us, help you.

Userbench does not like Nahimic Service. In services tab, find it, and stop it, then put to manual from automatic and complete the test, this will stop it causing userbench crying foul but still...

run userbench and post the link the URL to the results
https://www.userbenchmark.com/

What CPU, the motherboard has Qcode poster is their code posting.
Do you have NVMe drive in this ?

Yeah, same, there is a lot of posts with issues. If you have spare NVMe m2 slot use them, Kingston A2000 is a cheap pocket rocket.

Edit: (you appear full)
Have to say, Samsung for SSD.

Avoid...

Sorry I missed the 'I' in B550 and some ITX now have 4 slots as well, getting confusing !

Try the latest BIOS or launch bios recommended by Asus on support page for the CPU and after that, RMA...

Make sure you have put your RAM in 2nd & 4th Slot from CPU.
This is LPX Ram which is loot box RAM, the version number & model need approval for it work flawlessly with Ryzen or YMMV. I would not buy...

Windows 7 with Ryzen CPU has USB issues because it never went through validation and why Windows 10 does work.
https://maxedtech.com/amd-ryzen-and-windows-7/...

You can use SK Hynix, Crucial / Micron or Samsung (the only real manufacturers of RAM dies) and *generally any die for set and forget installations and maybe able to tighten timings a little to...

The problem is the SSD, go looking in there forum for an answer. See if the firmware etc is up to date.
https://eu.crucial.com/support/ssd-support/mx500-support

try another sata cable.

I read...

Any B550 or X570.... none of them use chipset for second PCIe.

Here try reading this and see if helps you out, I know its a lot to get your head around at the start and can be confusing...

Have you installed this firmware update
https://www.nvidia.com/en-us/drivers/nv-uefi-update-x64/

The Qcode 02 is 'AP initialization before microcode loading'.

9e is 'Reserved for future AMI codes'

My suggestion is try this, enable PBO.
87466

If I was buying a new motherboard for Ryzen 5000 and use case is gaming. B550 would be my choice, better everything (VRM's, PCB layers/layout, USB, NIC's, etc) over B450 and if cost mattered more go...

You just did some good investigation into the issue. The output voltage should be as marked on the power brick.
Can you quantify hot, above 50-55 degrees and wont be able to touch it for long below...

@ArnoldT

Your point is moot. Change to ACHI *MAY* result in data loss. Never has for me ever. You should have setup using the ACHI driver from the start. Worst Case blow your current OS and...

You do whatever you think is best. Stock voltage was never too high and whoever your quoting, well handsome is as hadsome does.

Goodluck.

ammm anyone feel free to correct me if wrong, but isn't B450 upgrade for Ryzen 5000 series a one way trip, you can't downgrade once it is done or at least that is what I have read since it was...

If you mean a completely new cache architecture (on same node) with an identical RAM controller make them similar, then sure, it is like saying all porcha type cars are the same or no difference...

This is a loot box type RAM (all Corsair LPX) the version numbers need to also match or otherwise not going to be fun, and I'm not surprised YMMV with these.

Did you update the BIOS to at least 2003 ?

IDK then could only find ROG x570 Strix BIOS on youtube video (going through it) and shows up there.

SOC voltage would be around 1.2v or higher (which is not recommended or needed) would have risk.

The is within your CPU not your RAM. It can't damage the RAM and extremely low risk for CPU as not...