Search:

Type: Posts; User: markm75

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Mine is SL delided and 5.1 avx of 1. 1.39v I...

    Mine is SL delided and 5.1 avx of 1. 1.39v

    I get 80 max on a few cores p95 no avx mod on blend

    General games and flight sim one core might hit 72C generally 68 or 69.not much different than my...
  2. I have a similar setup, using the 8700k silicon...

    I have a similar setup, using the 8700k silicon lottery rated 5.1ghz at 1.41 and avx -2 (by them).. with ram F4-3200C15D-32GTZ (not sure if the same, cas 15)..

    I have vcore at 1.39 currently.....
  3. I guess they really dont have any 4 port 3.1...

    I guess they really dont have any 4 port 3.1 plates out there, nor do they seem to have 3.0 4 port ones, only 2 ports.
  4. (four port ) USB 3.1 header to brackets? Only 3.0? USB type C 3.1 gen2 to front ?

    About to switch motherboards.. i've been on the hunt for brackets that support dual header connections and are rated at 3.1 gen1 etc.. i'm only seeing a handful on amazon and they usually only have...
  5. Ok, well i guess what i'm asking is what mininum...

    Ok, well i guess what i'm asking is what mininum spec card to use in the pciex1 slot or the x16 slots and not lose performance either in the video card or on the hard drives that connect to the card....
  6. Asus z170-a motherboard.. putting a sata 4 port card in one of the other pciex16?

    I was considering adding 2 more sata ports to the system.. but in doing so i think it may cause an issue.. unsure..

    If i add a pciex4 card to the 3rd pciex16 slot.. i'm aware that two of the sata...
  7. Yeah mine definitely didnt have this.. i may try...

    Yeah mine definitely didnt have this.. i may try to contact asus to see if they can send one out.. $12 for a single screw? wow
  8. Asus 170-a motherboard missing the standoffs and screws for m.2?

    A few months back or more, i received the asus 170-a motherboard.. but apparently it didnt come with the standoffs and screws to hold down the m.2 chips..

    Does anyone know how i can get these? ...
  9. I discovered only by digging through program...

    I discovered only by digging through program files.. an asus usb installation.. it had an uninstall in the folder.. i ran that and so far, no more bsods
  10. ASUSFILTER.sys system_service_exception with z170-a asus motherboard + i7 6700k and 3

    Wondering if anyone has ran into this error before.. i'm getting a bsod with the asusfilter.sys as a possible culprit.. it happens just about every night now it seems.

    I thought maybe overclock...
  11. Replies
    55
    Views
    14,872

    Thanks.. i passed at 4.6 and 1.2150 for vccio/sys...

    Thanks.. i passed at 4.6 and 1.2150 for vccio/sys agent.. now 12 hours at 4.7 and 1.2250...

    Is 1.2250 a safe value to leave it at long term/24/7?
  12. Replies
    55
    Views
    14,872

    Not sure if you meant not good to combine with...

    Not sure if you meant not good to combine with different specs? I always thought it was best to use the same brand and model which I have at this point? Or is this a new recommended thing and if...
  13. Replies
    55
    Views
    14,872

    Revisting my old thread here, but I had 24 hour...

    Revisting my old thread here, but I had 24 hour blend stable with 16gb memory. A few weeks ago I added 16 more. Now I've had bsod in Windows and tried the windows memtest, almost instant errors. So...
  14. Replies
    55
    Views
    14,872

    Sorry on the delay, as far as i can tell it is on...

    Sorry on the delay, as far as i can tell it is on all the time in my case.
  15. Replies
    55
    Views
    14,872

    Ambient maybe 24c on average (22.5-24c). I...

    Ambient maybe 24c on average (22.5-24c).

    I dont see an rpm indicator for my psu, because i dont think mine had a hookup to allow that, so i cant provide anything useful there i dont think.
  16. Replies
    55
    Views
    14,872

    Me personally.. i have the bios set to PWM for...

    Me personally.. i have the bios set to PWM for the thermaltake 3.0 riing ultimate.. i've monitored it in the asus software.. i never see it go above say 800 rpm unless the temps get up there.. even...
  17. Replies
    55
    Views
    14,872

    Sure is time :) Thanks for the assistance...

    Sure is time :) Thanks for the assistance previously and sanity checks. After 2.5 years its easy to forget a few things here and there.


    Oh here are my general gaming results from last nite,...
  18. Replies
    55
    Views
    14,872

    just for fun i tried setting LLC to 4 and cpu...

    just for fun i tried setting LLC to 4 and cpu capacity to 140%..

    I then set the bios to 1.42 + 0.008 or so.. i showed 1.424 under load at most.. received errors 1hr into the prime 95 blend.. (i...
  19. Replies
    55
    Views
    14,872

    902

    Thanks, yeah i know i should have done ram separately.. i did at first, then got greedy and impatient :D

    Thats good validation, knowing yours needed 1.488 (i assume you meant under load not what...
  20. Replies
    55
    Views
    14,872

    Update yet again.. Adaptive testing: i...

    Update yet again..

    Adaptive testing:

    i started off NOT lowering LLC from the value of 6 out of 7.. i figure, if it needs so much vcore.. whatever value.. then lowering the LLC will only make me...
  21. Replies
    55
    Views
    14,872

    Ah ok, so its better to set negative adaptive...

    Ah ok, so its better to set negative adaptive voltage than to try to set a regular voltage that is too low for most regular use i take it?

    Makes sense.
  22. Replies
    55
    Views
    14,872

    Thanks.. Any suggestions, if say i was settled...

    Thanks..

    Any suggestions, if say i was settled at 1.40 bios (1.392 - 1.408 vcore) (ill keep trying for lower settings) on what i should go for for adaptive voltage? Should i shoot for something...
  23. Replies
    55
    Views
    14,872

    It had something to do with the way i was...

    It had something to do with the way i was actually remoted to the machine..

    direct test.. equal success 1hr 6 min so far at 4.7 and 1.40 fixed (LLC5) active vcore at 1.392 though the max shows...
  24. Replies
    55
    Views
    14,872

    No matter what i do.. volts up to 1.43(at 4.7) or...

    No matter what i do.. volts up to 1.43(at 4.7) or back to 1.4 at 4.6.. everytime i run realbench with this new cpu i'm getting instability detected within 13 minutes.

    i've tried vccio and system...
  25. Replies
    55
    Views
    14,872

    Yeah this chip, temp wise seems to be a winner.....

    Yeah this chip, temp wise seems to be a winner.. i used to view 85 for p95 as my cutoff on safety, yeah 90 is ok, but i just personally felt better capping it there.

    Prepar3d really digs into the...
Results 1 to 25 of 40
Page 1 of 2 1 2