Search:

Ok thanks ;)

I wasn't paying attention, but your CPU heats up less with this microcode ?

Ah yes for the CPU score, if you could increase the OC :D

Thanks for your feedbacks ;)

I would test with the software I use, etc ... see the performance of this 3003
For Cinebench, it's a bench to forget with the latest microcode I have the impression
...

Ok thanks

bogsha bios has microcode 3003
This bios and microcode 29 would not work "together"... :confused:

You confirm that with the microcode 3003, the performance is still lower compared to...

the bios i posted, doesn't work for you too?


Yes that's it

I tested the 0901 bios with firmware 29, it does not boot with my RAM settings (code: BD)
No worries with the 702, back to this one

I have not tested the 3003 microcode, but it has been tested,...

the 901 does not have the 3003 microcode, by default
I modded it, if anyone wants to test

https://drive.google.com/file/d/1AKzmvwtkbluMlpjhqhCtiN2bBiBNdQlb

someone tried the latest microcode (3003) for CascadeLake-X, see if the performance is still dropping ?

When the PSU was OFF, there are double boot
No more present in Extreme, Omega

@shamino

could you remove the dual boot (when PSU was off) ?
And fix the voltage bug between the AB and CD channels ?

Thanks so much

Hello

What is this "rebar" option ?

Thanks

EDIT: Ah this is for the Nvidia RTX3000 card (and AMD card maybe) ?

You want 3201 R6A bios with 49 microcode (for Skylake-X) ?

I only find version 12.19.0.10 on the MS catalog

I have the same problem
I will send it back, for this problem and for the IPS glow which is too present

Ok thanks ;)

Yes, for CL-X microcode, no improvement....

The TSX is for SQL ?
Why i don't see a difference

Thanks

For TSX, is TSX Suspend Load Address Tracking in Aida64 ?
When I tested the latest microcode for CL-X, the performance was disastrous compared to old microcode

And with old microcode, the TSX is...

You're welcome and yes ;)

No worries with this drivers ;)

EFI RaidDriver is well added (EFI Intel RST for SATA) ;)

0702, no ?

I had put a link with the last bios, and the last updated module a few posts above ;)
But old microcode (for performance)

You're welcome ;)

It bothers me to put more than 1.20v for the Vcore to use Adaptive Mode, while it takes 1.15v to 4.7 :D

Besides, this 0.12v offset, how was it found ?
With tests ?

it's this one ;)

If it suits you :D

Thanks @vmanuelgm

Yes I had seen but I was mainly asking how to find the right vcore for each core ;)

Now, I stay in manual Vcore (the Offset is too important, more than 0.16v)