Search:

Type: Posts; User: Braegnok

Page 1 of 11 1 2 3 4

Search: Search took 0.25 seconds.

  1. Here you go! Official SLI key was dropped...

    Here you go!

    Official SLI key was dropped yesterday, BIOS 1101.

    Scroll down to post # 3,058,.. https://www.overclock.net/threads/official-asus-strix-maximus-z690-owners-thread.1794802/page-153
  2. I switched to Windows 11 also after building new...

    I switched to Windows 11 also after building new Z690 system, lots of new bells & whistles to play with.

    Corsair has been making memory for a long time, was a good choice going with...
  3. Hello JBBlack, I understand your concern...

    Hello JBBlack,

    I understand your concern buying DDR5 memory for your new system that is not listed in QVL.

    And I agree with that when you are planning on buying pre-overclocked kits.

    However...
  4. Personally today I would buy the Corsair 2x16GB...

    Personally today I would buy the Corsair 2x16GB 4800MHz kit listed on the egg, in stock for $309.99 https://www.newegg.com/corsair-32gb-288-pin-ddr5-sdram/p/N82E16820236826

    You will be fine...
  5. Just received the 2x8GB SK Hynix kit today,.....

    Just received the 2x8GB SK Hynix kit today,.. they are looking good.

    I wasn't going to test them till this weekend. But decided to give them a go at 6000MHz. And they booted Windows fine, so I...
  6. I'm running the paid version of HWiNFO64, you can...

    I'm running the paid version of HWiNFO64, you can right click any sensor displayed and show sensor in your tray.

    Running Karu memory test or benchmarking in Windows with a few sensor temps...
  7. I plan on running wPrime this weekend, some...

    I plan on running wPrime this weekend, some 3Dmark runs.

    Personally I recommend sticking with 0811, that is my main 24/7 BIOS it is 100% stable.

    Basically I'm having lots of fun with this new...
  8. I tested the AI overclock last week, it does a...

    I tested the AI overclock last week, it does a 71% OC with P-cores @ 5.4GHz, turbo boost @ 5.5GHz,.. system is stable but under heavy load temps are insane. And I disabled [ALL] E-cores tested again...
  9. I do have concerns about the PMICO on the Dell...

    I do have concerns about the PMICO on the Dell memory when I'm running it over spec, after checking spec in HWiNFO64.

    Seems to be listed as Low-Voltage PMICO, with VDD & VDDQ both @ 1.1V.

    91735...
  10. Thanks for sharing that info. I was stable...

    Thanks for sharing that info.

    I was stable with my G.SKILL 5600C36 in both XMP 1 profile and the Samsung preloaded profiles, but haven't ran Memtest yet with that kit.

    Pulled the Samsung kit,...
  11. Replies
    3
    Views
    132

    Memtest reads the Memory Modules, and will show...

    Memtest reads the Memory Modules, and will show Size and Type Modules being tested.

    The actual Clock speed will be what you have listed in your BIOS.

    When I run Memtest it also shows as...
  12. Nice you got your system running,.. I woulden't...

    Nice you got your system running,.. I woulden't worry about high temps when running benchmarks,.. provided during normal usage with default settings your cooling solution is working, the i9-12900K...
  13. Thermaltake A700 TG:...

    Thermaltake A700 TG: https://www.thermaltakeusa.com/a700-aluminum-tempered-glass-edition-full-tower-chassis.html

    It's a bit pricy, but worth it. cooling is great with 2x 200mm front intake, 2x...
  14. All of the M.2 sockets are backwards compatible...

    All of the M.2 sockets are backwards compatible with 3.0 x4 drives.

    Except perhaps the PCIe 5.0 M.2 AIC I'm not 100% sure about the AIC, except the fact it does use CPU PCIe lanes and will take...
  15. Personally I would use M.2_2 for your Primary...

    Personally I would use M.2_2 for your Primary drive @ 4.0 x4, than after installing OS shut down and install DIMM.2 module/card, and you can install single or both drives,.. both will run @ 4.0 x4....
  16. That's going to look sweet when your finished. ...

    That's going to look sweet when your finished.

    Personally I feel each block & every fitting effects flow-rate.

    So keep it simple.

    And never get in a slapping contest with a 400 pound...
  17. I'm vary happy with the Z690 Apex, haven't had...

    I'm vary happy with the Z690 Apex, haven't had any issues.

    The DIMM-2 slot is on the chipset so you might see higher PCH temps if you use it vs not using it. I'm only using one M.2 drive in M.2_2...
  18. The minimal aesthetic looks good combined with...

    The minimal aesthetic looks good combined with the Apex boards two-slot configuration.

    Modifying the jackets was easy after realizing the issue,.. drill holes before installing memory, use screws...
  19. The Video is vary deceiving, so are the included...

    The Video is vary deceiving, so are the included instructions that are not written in English.

    Seller is top notch however, they shipped item quickly and I received item from China in just a few...
  20. I use the Noctua Antivibration Mounts on all my...

    I use the Noctua Antivibration Mounts on all my fans: https://noctua.at/en/products/accessories/anti-vibration

    The Z690 build is going well, I put some EK Monarch shields on a 6000MHz DDR5 kit...
  21. The PCH Heatsinks generally are screwed on/off...

    The PCH Heatsinks generally are screwed on/off from the backside of the motherboard. When removing these screws it's vary important to use correct size screw tip, use a heat gun to heat...
  22. 75-78 under lite load, 90-92c with heavy load...

    75-78 under lite load, 90-92c with heavy load seems high for PCH temp. What voltage's are you running, is your system overclocked.

    I'm running fairly high voltages on everything with system...
  23. The black mounting plate +1,.. nicely done sir. ...

    The black mounting plate +1,.. nicely done sir.

    Happy Holidays.
  24. The new EK Torque Series Gold might be what your...

    The new EK Torque Series Gold might be what your looking for....
  25. Currently your best option for running 64GB DDR5...

    Currently your best option for running 64GB DDR5 is getting a 2x32GB kit.

    Provantage had the Crucial 2x32GB kits up for sale back in November and I ordered one kit,.. a week later they sent an...
Results 1 to 25 of 270
Page 1 of 11 1 2 3 4