Search:

Type: Posts; User: Banditt1976

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. I don't think you will have much luck getting any...

    I don't think you will have much luck getting any tighter timings with the defaults being manufactured with those slower timings. My G.Skills are 17-17-17-37 1.35v defaults, but I have them set...
  2. How much RAM are you running total and how many...

    How much RAM are you running total and how many sticks total? I have this same motherboard with G.Skill 4 x 8 GB installed and it is virtually impossible to get it to run stable at 4000 MHz. I have...
  3. Make sure you have three separate PCIe power...

    Make sure you have three separate PCIe power cables coming from the PSU and are not using any Y-cable PCIe power cables going to the 3090 card.
  4. Personally I would never use an air cooler on...

    Personally I would never use an air cooler on such a powerful processor. AIO should be a minimum cooling solution, especially if you are able to acquire the rtx 3090 ti graphics card. I have an AMD...
  5. What case are you using? Maybe it has connections...

    What case are you using? Maybe it has connections that are not compatible with the motherboard. I had a similar issue with an older MSI motherboard that had a USB 3 connection but the PC would either...
  6. Asus ROG STRIX X570 E GAMING WIFI II not posting (Error code 00)

    Another thing you can try if you haven’t already is to use a separate PCIe cable from the PSU to each of the 8 pin connections on the 3070ti instead of using just one Y PCIe cable from the PSU. I had...
  7. It sounds like it’s actually hanging on the POST...

    It sounds like it’s actually hanging on the POST test if it’s the ROG logo and not the Windows logo during this period. Go into the UEFI/BIOS settings and turn off the splash screen on startup in the...
  8. DOCP settings rarely work when trying to...

    DOCP settings rarely work when trying to overclock RAM on an AMD based motherboard. Try going into the BIOS and set the RAM to Manual instead of DOCP while copying over the DOCP settings to the...
  9. Sticky: The FCLK should be 1/2 of what your RAM frequency...

    The FCLK should be 1/2 of what your RAM frequency is set at. If it won't boot with it set like that in the BIOS, then your timings and/or voltages need to be adjusted.
  10. Other than the limited cooling options you are...

    Other than the limited cooling options you are going to have with that case, all the hardware you are upgrading looks like it should work good together.
  11. Replies
    1
    Views
    303

    Just remove the extra "/" and the website will...

    Just remove the extra "/" and the website will load. I did that and it loaded correctly for me.
  12. I had the same problem with my G.Skill TridentZ...

    I had the same problem with my G.Skill TridentZ RGB RAM @ 4000 MHz. Using D.O.C.P (AMD's XMP) it would never boot @ 4000 MHz. First I went in and set the RAM timings and voltage to manual using the...
  13. Thread: PC Monitor

    by Banditt1976
    Replies
    2
    Views
    479

    Really depends on what you plan to use the...

    Really depends on what you plan to use the monitor for. What resolution, refresh rate, other features do you want to have? Also your price range will make a big difference in what you get for your...
  14. I would wait since it has today's date as the...

    I would wait since it has today's date as the release date. Let other 3090 owners do the testing for you and then decide if it is worth it.
  15. OC Scanner is part of the ASUS GPU Tweak II...

    OC Scanner is part of the ASUS GPU Tweak II software. I am on V3, the latest version for my card.

    Where are you finding a V4 version? I only see up to V3 for the 3090 on ASUS's product support...
  16. As far as updating to V4 BIOS, that is up to you....

    As far as updating to V4 BIOS, that is up to you. Find out what types of issues are happening and what are causing them from others. Is the risk right now really worth %5 increase in performance in...
  17. I finally got my RAM to post at 4000 MHz after...

    I finally got my RAM to post at 4000 MHz after using manual timings and setting the CPU to Auto and using PBO along with Curve Optimizer. Before doing PBO with Curve Optimizer, the RAM would not POST...
  18. Replies
    15
    Views
    829

    No problem. Good luck. Hope it works out for you...

    No problem. Good luck. Hope it works out for you in the end.
  19. Replies
    15
    Views
    829

    The RAM should be fine. I don't think it ever got...

    The RAM should be fine. I don't think it ever got to a point where it could be damaged by current flow. Just check the RAM to make sure everything is still intact with nothing visually wrong with the...
  20. Replies
    15
    Views
    829

    Do you still have the B550-E motherboard with...

    Do you still have the B550-E motherboard with you? If you do, try to put everything back onto it and try to boot up. If everything boots fine then you have a bad X570-E motherboard.
  21. Replies
    15
    Views
    829

    If the CPU is making any noise when putting in or...

    If the CPU is making any noise when putting in or taking out, something is wrong with the CPU pins or the socket itself. If it doesn't rest in the socket with no effort needed to keep it in place as...
  22. Replies
    15
    Views
    829

    How many sticks of RAM do you have? If only 2,...

    How many sticks of RAM do you have? If only 2, put them in the 2nd and 4th slots away from the CPU.
  23. Replies
    15
    Views
    829

    Are you using D.O.C.P. settings for the RAM in...

    Are you using D.O.C.P. settings for the RAM in the BIOS. Try to use the same settings, but put them in manually and see if it will boot.
  24. Replies
    15
    Views
    829

    Are you sure you have the CPU inserted correctly....

    Are you sure you have the CPU inserted correctly. With pin1 in the correct orientation, the CPU should be one turn clockwise into the slot, not directly with the text on the chip reading...
  25. Do you have the ReBar option enabled in your...

    Do you have the ReBar option enabled in your system's BIOS?

    CSM must also be disabled in the system's BIOS.
Results 1 to 25 of 42
Page 1 of 2 1 2