Search:

Type: Posts; User: Melting Point

Page 2 of 19 1 2 3 4 5

Search: Search took 0.01 seconds; generated 72031 minute(s) ago.

  1. Replies
    6
    Views
    2,247

    I don't know what to say about your OC, or your...

    I don't know what to say about your OC, or your startup voltages, but I will say that you should have some active cooling on your VRM heatsink if you're going to be benching at 4.7GHz. It will get...
  2. Replies
    2
    Views
    1,451

    And what temp is that? CPU, motherboard, PCH?

    And what temp is that? CPU, motherboard, PCH?
  3. Seems like either a) the H100 isn't cooling the...

    Seems like either a) the H100 isn't cooling the CPU for some reason (eg, poor contact, no water flow, etc), or b) you've over- tightened the mounting screws on the H100.

    I'd try mounting your old...
  4. Replies
    8
    Views
    6,011

    Then we'll know that it's somehow related to your...

    Then we'll know that it's somehow related to your RAM

    The EZ plug 2 connector is the small 4 pin connector, it's the same as a 3.5" floppy power connector. It provides extra power to the RAM, and...
  5. You can copy the second BIOS over to the first...

    You can copy the second BIOS over to the first BIOS. Load the second BIOS. Then you should see an option to "Copy BIOS 2 to BIOS 1" on the menu page which has the ez-Flash menu item. I can't remember...
  6. Replies
    11
    Views
    4,847

    You could look into the solution posted on the...

    You could look into the solution posted on the first page by propi62.

    If you don't have a NAS, you could use a Raspberry Pi, the power usage on one of those sitting there doing nothing would be...
  7. Replies
    8
    Views
    6,011

    Sleep issues are usually memory related. Try...

    Sleep issues are usually memory related. Try temporarily running your memory at 1600 to see if the problem goes away.

    Do you have the EZ_Plug 2 connector plugged in?

    You could also try...
  8. Replies
    13
    Views
    6,192

    Thanx jcrane929, but I've since found out that...

    Thanx jcrane929, but I've since found out that the IHS of my 3930K is soldered on, so delidding is not an option.
  9. AHhhh.. That makes a lot more sense. :)

    AHhhh.. That makes a lot more sense. :)
  10. It's been a while since you left the basement,...

    It's been a while since you left the basement, hasn't it Antronman. :D
  11. Replies
    2
    Views
    1,472

    Do you have the eSata drive plugged in when you...

    Do you have the eSata drive plugged in when you boot your machine? If so, can you see it in the BIOS?
  12. Not sure if this is the same with the RIVBE, but...

    Not sure if this is the same with the RIVBE, but on the RIVE, you're supposed to use the white ROG USB port.
  13. Just had a look on the Coolermaster site, and...

    Just had a look on the Coolermaster site, and they say the hyper 212 evo is compatible with socket 2011 and i7 extreme, so if you're running stock and it still getting up to 90C, then the cooler...
  14. I don't believe you can delid the 3930K,...

    I don't believe you can delid the 3930K, apparently they're soldered on.

    There is another possibility. Next time you remove your EVO, before you put the D14 on, double check that both surfaces of...
  15. Try this. Take note of your VCCSA under the 4208...

    Try this. Take note of your VCCSA under the 4208 BIOS. Then Flash the 4804 BIOS using the flashback method. When you reboot after that, enter the BIOS, press F5 to load default settings, then F10,...
  16. I wonder what sort of heat sink lube you'd use to...

    I wonder what sort of heat sink lube you'd use to overclock that.
  17. Understood. What I'm suggesting to you is that it...

    Understood. What I'm suggesting to you is that it might be easier to solve the issues with your RAM on the later BIOS versions. It looks like there's an issue with the 4208 BIOS and VT-d support,...
  18. Thanx Jab. Vocab lesson, lol. We've all been...

    Thanx Jab. Vocab lesson, lol. We've all been there. "Son of a..." is a phrase my equipment is all to familiar with. :)
  19. I don't know if it's already been suggested, but...

    I don't know if it's already been suggested, but having a "GO" button on the keyboard would be handy, if it's possible.
  20. You should ask them if it's possible for them to...

    You should ask them if it's possible for them to send you a new drive, which you could install yourself, they're easy to install.
  21. That's about the same Vcore I use to get 4.5GHz....

    That's about the same Vcore I use to get 4.5GHz. What are you using to measure the CPU temp? When you say "CPU Package Temp", do you mean the temp reported by AI Suite? That temp substantially lower...
  22. Replies
    8
    Views
    2,647

    Something seems awfully wrong there. I would...

    Something seems awfully wrong there. I would measure the voltages on the board with a multimeter to see what they really are.
  23. dbit, one other thing you could try, remove the...

    dbit, one other thing you could try, remove the fan from your EVO, and check to see the fins are clear of any blockages. I have to vacuum out the dust from my Phantek every 6 months to a year.
  24. Interesting. Any idea what the current draw of...

    Interesting. Any idea what the current draw of the CPU PLL is? I thought it was fairly low.
  25. Have you tried later versions than 4403? I've got...

    Have you tried later versions than 4403? I've got one of the earlier 3930K CPUs that doesn't support VT-d, so I can't tell you if I'm having the same issue. But perhaps someone else with a C2 3930K...
Results 26 to 50 of 455
Page 2 of 19 1 2 3 4 5