Search:

Type: Posts; User: SmokeyKilla

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. according to articles ryzen 7 4750g pro cpus are...

    according to articles ryzen 7 4750g pro cpus are only compatible with 5 series mother boards and are not backwards compatible to 4 series boards...
  2. The B450 F Chipset supports everything X470 does...

    The B450 F Chipset supports everything X470 does with one exception, CPU PCIe lane bifurcation. In English, that means the 16 PCIe lanes to your graphics card from the CPU can only be to a single x16...
  3. yep most likely is your cpu rather than your...

    yep most likely is your cpu rather than your memory its a bit of a lottery and unless your gaming at 1080p which i highly doubt on a rig like this your not going to notice the difference between...
  4. I really doubt you will find any parts for your...

    I really doubt you will find any parts for your case being over 12 years old now, you could buy a hot swap bay, however they are not cheap. In all honesty its time to update your case.
  5. Each RGB draws ~60mA of current so with a 3A...

    Each RGB draws ~60mA of current so with a 3A limit of the motherboard you could power up to ~50 RGB LEDS (approx).( so 2 strips with 25LEDS) I suggest you find a controller like the coolermaster...
  6. I had the exact same problem and every time I...

    I had the exact same problem and every time I update the drivers it does it as well. For some reason I can't boot with a HDMI cable I have to use a display port cable. Once you have booted however...
  7. Replies
    13
    Views
    1,567

    I have seen this exact same problem when people...

    I have seen this exact same problem when people use the cloud or one drive etc https://hitech-us.com/articles/entry/292/Ping-spikes-on-Wi-Fi-every-10-seconds-Solved
  8. Replies
    5
    Views
    557

    Seems to be a common problem with these PSU's...

    Seems to be a common problem with these PSU's https://www.reddit.com/r/sffpc/comments/a0cpj1/failed_sf600_platinum/ are you using the standard modular power cables, that came with the unit?
  9. This controller will do it provided you have a...

    This controller will do it provided you have a spare fan header doesnt have to be RGB
  10. https://www.amazon.com.au/EZDIY-FAB-Converter-Tran...

    https://www.amazon.com.au/EZDIY-FAB-Converter-Transfer-Splitter-Motherboard/dp/B082KJH2T3 you need something like this and a cable to suit all your fans...
  11. Replies
    5
    Views
    2,202

    Apparently this is a common problem. The only...

    Apparently this is a common problem. The only way they will both show up is if you plug them both to separate headers on your M/board. If you dont have one spare You can try two solutions.

    Move...
  12. Thread: What RAM?

    by SmokeyKilla
    Replies
    5
    Views
    674

    Any ram will work provided its the right type,...

    Any ram will work provided its the right type, DDR4 in this case, QVL lists are by no means exhaustive, I wouldn't put much, or really any importance on them with a Ryzen 9 processor. Some of the...
  13. Replies
    4
    Views
    995

    I meant why run a 1200watt PSU if the system he...

    I meant why run a 1200watt PSU if the system he is using is the one in his tag then approx 350watt is all that is required. So even a 500watt psu would be overkill.
  14. Firstly any trident Z memory will work even if...

    Firstly any trident Z memory will work even if its not "supported" by your motherboard. Just for the record in the last 6 months I have purchased over 256 sets of Trident Z memory and have had to...
  15. most m2 drives without fan cooling will reach...

    most m2 drives without fan cooling will reach 60-70 Celsius under heavy load ....Installing a side chassis fan blowing over the PCI-E slots actually dropped my temps by almost 25c (at first reaching...
  16. Thread: Dust cover

    by SmokeyKilla
    Replies
    6
    Views
    1,005

    sorry i dont have a 3d printer....why do you need...

    sorry i dont have a 3d printer....why do you need a cover?
  17. Replies
    4
    Views
    995

    Your setup looks great however there is a reason...

    Your setup looks great however there is a reason why the current trend is to use minimal filtration and its because of airflow. While your system may work fine for a standard build, it unfortunately...
  18. Thread: Dust cover

    by SmokeyKilla
    Replies
    6
    Views
    1,005

    I dont see why you would need a dust cover. The...

    I dont see why you would need a dust cover. The only way would be to get one 3d printed.
  19. I tried every bios that supports a ryzen 5 5600x...

    I tried every bios that supports a ryzen 5 5600x and could not get the system to post reliably or to even run somewhat with stability, after a RMA exactly the same problem........(this was after 3...
  20. Replies
    4
    Views
    972

    The x570 tuf is not a board that is suitable for...

    The x570 tuf is not a board that is suitable for overclocking as a lot of bios functions cannot be changed manually. If you want to overclock up-grade your board
  21. I had the same problem, to cut a long story short...

    I had the same problem, to cut a long story short my ASUS 570x tuf gaming is not compatible with a ryzen 5 5600x..... i can only boot with 2 sticks of 16gb ram in a1 and a2 and only with...
  22. Replies
    4
    Views
    624

    AO code means that the BIOS handed over control...

    AO code means that the BIOS handed over control to the OS... it is not an error code!
  23. Replies
    5
    Views
    12,043

    There is something wrong with your motherboard. ...

    There is something wrong with your motherboard. Your fan shouldn't be noisy. I never hear my fan ever just a slight whoosh from my gpu when playing intensive games. You fan shouldn't be spinning...
  24. yeah you can this article will help you ...

    yeah you can this article will help you https://edgeup.asus.com/2019/how-to-get-the-most-out-of-your-rgb-leds-with-aura-sync/
  25. Replies
    2
    Views
    932

    you have optical fibre that can handle 10gb/s but...

    you have optical fibre that can handle 10gb/s but what actually is your ping? To me is sounds like a latency problem. Try turning down all your graphic settings and see how much difference that...
Results 1 to 25 of 42
Page 1 of 2 1 2