Search:

Hi all,

I recently upgraded from 3960x to 3970x. For productivity I received the expected extra performance, but I started to have issues with gaming.

When turning PBO on, I am getting very low...

Any ideas how could I control the Fan Extension Card besides by installing the AiSuite software? I did not found anything about it in the BIOS. A third party software could also work. I just don't...

I have Zenith II and the fan extension is not available in the BIOS. I am not sure that it actually should be as it's still an addon card.

What bothers me most is that under AI Suite 3 the minimum...

Hi,

I owned the very first Zenith board that came with an Aquantia addin card. After using it for awhile it just disconnects and the only way to recover is a reboot. Back then I tried different...

How many m.2 drives do you have?

I want to confirm it just worked. Replaced the mobo and the CPU. Moved the NVMe and the SATA SSDs and all started normally. Both the NVMe and the SATA RAID was recognized immediately. Windows booted...

It was all my bad. The board works fine. I forgot that Liqtech cooler have to be connected to opt fan. And the issue with the Noctua was due to a low noise extension cable. Removed it and all works...

Hi. Just set the Zenith II. All works fine but the CPU fan not detected, no RPM in PWM mode. Tried with my Enermax Liqtech II and also with an ordinary Noctua fan, but nothing. In fact it seems any...

Really? That's great if it works. Thanks! My new CPU arrives tomorrow and I will give it a try. If it doesn't work it will be a real pain as I will have to reconnect everything to start the old board...

Hi all,

I just received the Zenith II. It is beautiful. Still waiting to receive my new 3960x and put it all together.

Now I have a question, hopefully someone can help. My current rig runs...

New 1601 here: https://www.overclock.net/forum/11-amd-motherboards/1642825-asus-x399-rog-zenith-extreme-complaint-bug-tracking-thread-109.html#post27686048

As far as I know Ryzen is not supported on Windows 7.

Aura makes me a lot of troubles as well. My Enermax liquid cooler RGB are often not turning on. So far the solution I have is to turn off the computer completly, powering off the power supply or...

Hi,

I'd like to set custom PBO values similar what I can do in Ryzen Master. I found the PBO settings in the BIOS and using Enabled work with some default presets. Now setting this to Manual,...

Any chance you have bad blocks on your storage device?
What are your CPU temps?

Tried to mention about this in another post, but I believe this topic deserves a bit more attention so I created a new thread.

There is a strange option in the BIOS named "Overclocking...

Thanks everyone for the tips.

I tried to play with MI skew and MI offset but for some reason did not found any difference. In fact I believe that Tdie already shows the actual temp while Tctl the...

Take a look at this Linus video.

https://www.youtube.com/watch?v=lzzavO5a4OQ

He's actually using 4 NVMe drives. What's important is that you have to balance them because of how the CCXs are...

Hello,

I have issues with my setup with very high temperatures on a moderate overclock and will appreciate any help.

System setup:
Mobo: Asus Zenith Extreme X399
CPU: AMD Threadripper 1950x...

Try again with both sticks. Use slots A2 and B2. Counting the slots from the CPU those are the 2nd and the 4th. Ensure they properly fit.

If they doesn't work, try swapping them so the stick from...

Hello,

I'm having some weird sensor/fan issues. I'm running crypto coin mining software (when not using the GPUs for gaming or work) on two Titan X (Pascal) cards. There's a good air flow inside...

3900 is the sweet spot for this CPU. To get higher speeds you need to increase the voltage, and you start to see significant temperature rises and power draw. Keep it cool and efficient at 3900 and...

Yes, that's what I heard as well. But do you have any USB devices that can actually benefit of that?



Test how your M.2 works with both GEN 2 and GEN 3. Most of M.2 devices are not reaching...

First at all it depends a lot of your use case. Ryzen benefits a lot of RAM frequency, the timings doesn't matter that much.

Now about the difference between GEN 2 and GEN 3.

If it's about...

Just managed to run a 2x16 GB kit at 3200. It's Corsair Dominator Platinum @ 3200 CL16 (CMD32FX4M2C3200C16).

64114

I was unable to find whenever this is single or dual rank DRAM, and I'm...