Search:

Type: Posts; User: Grimpak

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. use vcore offset to drop the voltage.

    use vcore offset to drop the voltage.
  2. Replies
    16
    Views
    2,163

    question, if you don't mind: why?

    question, if you don't mind: why?
  3. M13A user here. maybe it's the fact that...

    M13A user here. maybe it's the fact that sometimes when doing auto-tuning, some fans end up with ridiculous minimum low-speed values, like 60%.


    either way, reporting that I managed to shave some...
  4. that must be the problem. check voltage caps...

    that must be the problem. check voltage caps menu, digi+ menu, etc... also, ram says it's running at 2800mhz.
  5. Replies
    67
    Views
    8,445

    did you update to the latest firmware? in my case...

    did you update to the latest firmware? in my case it seems that it has solved it.
  6. I have an 11900f in an M13 apex (I know, totally...

    I have an 11900f in an M13 apex (I know, totally overkill for the cpu) and running a ballistix 32gb kit at 3600mhz happy as a bunny.

    So at this point I can only think of 3 things:

    A) board has...
  7. try to setup it manually instead of going XMP.

    try to setup it manually instead of going XMP.
  8. use xmp mode 1 instead 2. maybe you'll need to...

    use xmp mode 1 instead 2. maybe you'll need to pump up some voltages too. try to put vdram at 1.375 or something thereabouts (don't worry much here about voltage, ram can handle up to 1.4v well.
    ...
  9. Hmm... I think the reason is because you're...

    Hmm... I think the reason is because you're trying to run 4 dual rank sticks of high density. 11th and below only works well with 2 ranks per channel. Those sticks are dual rank so, you're putting...
  10. Replies
    7
    Views
    579

    tried fiddling on the BIOS usb options?

    tried fiddling on the BIOS usb options?
  11. what case do you have?

    what case do you have?
  12. Replies
    7
    Views
    503

    you're going to use the 10700k? any particular...

    you're going to use the 10700k? any particular reason, or do you have it lying around?


    either way, don't forget that the cpu-bound nvme slot won't work with 10th gen (the m.2_1 slot)
  13. go to the drivers, raise power limit? or use ...

    go to the drivers, raise power limit? or use afterburner to raise power limit?
  14. you can supertune it (fiddle with the primary and...

    you can supertune it (fiddle with the primary and secondary timings). However that is a very time-consuming effort, I must tell you. Considering zen2 specs, there is benefit to bring the memory up...
  15. Okay, fair, but I think you can transfer the ...

    Okay, fair, but I think you can transfer the keys to/from a usb stick with fTPM, if i'm not mistaken.
  16. you have win11 beta version installed, I think...

    you have win11 beta version installed, I think that's your problem. probably some sort of driver issue.
  17. Replies
    8
    Views
    3,812

    well, he has a 10850k, so any change will be at...

    well, he has a 10850k, so any change will be at most a sidegrade, at worst a downgrade.
  18. Replies
    8
    Views
    716

    Hmm, memory conflict then. Guess the issue was...

    Hmm, memory conflict then. Guess the issue was all software.
  19. Ok but do you have any *real* need for the TPM...

    Ok but do you have any *real* need for the TPM module? as far as I know, either the module or the fTPM are functionally equal.
    Feel free to correct me on this tho, for I'm not sure.
  20. not using the fTPM built-in?

    not using the fTPM built-in?
  21. Replies
    8
    Views
    716

    Only on that software, irregardless of the gpu?...

    Only on that software, irregardless of the gpu? Software bug probably related with the configuration of your system. Certain bugs can only be replicated using certain hardware configurations.

    Has...
  22. Replies
    8
    Views
    716

    doesn't feel like a hardware issue tbh. hardware...

    doesn't feel like a hardware issue tbh. hardware issues tend up to be more.... crubstomping to the computer itself. maybe some sort of software incompatibility? antivirus? anything on the background?
  23. sorry, I've should've expanded. if you tried...

    sorry, I've should've expanded.

    if you tried every slot with the same cable and it still happens, then the problem is the cable.
  24. I think you just answered to your own question...

    I think you just answered to your own question here...
  25. Replies
    12
    Views
    823

    kay-o as for 11th gen, I'm actually using a...

    kay-o

    as for 11th gen, I'm actually using a 11900f with my apex. Don't need the cpu OC, but the memory OC capabilities are interesting for me. As soon as I have the watercooling system setup as I...
Results 1 to 25 of 62
Page 1 of 3 1 2 3