Search:

Type: Posts; User: elmor

Page 4 of 5 1 2 3 4 5

Search: Search took 0.01 seconds; generated 60953 minute(s) ago.

  1. Replies
    27
    Views
    25,281

    I don't think it's bricked because it's never...

    I don't think it's bricked because it's never been powered on. Rather this sounds like a cooler mounting issue like the EK problem. Try starting the board without the cooler mounted/tightened and...
  2. Thread: Q-code 56?

    by elmor
    Replies
    5
    Views
    4,539

    That's perfectly normal. Q-code doesn't show...

    That's perfectly normal. Q-code doesn't show errors but rather status updates.
  3. Replies
    19
    Views
    18,555

    Could also be the VGA card, and DRAM instability...

    Could also be the VGA card, and DRAM instability can still affect it. I suggest you try latest BETA 5803 from here, a lot of users have reported the 55 issue gone after updating to it....
  4. Thread: Error 55

    by elmor
    Replies
    9
    Views
    14,012

    FYI 55 is not directly DRAM related (though DRAM...

    FYI 55 is not directly DRAM related (though DRAM stability can still affect it), it's PCI Express initialization. Older BIOS had some issues with certain M.2 drives which would cause it to stall at...
  5. Replies
    19
    Views
    18,555

    For future reference 54/55 is not DRAM on this...

    For future reference 54/55 is not DRAM on this platform, but rather PCI Express device initialization. I believe there was an issue with certain M.2 drives on the earlier BIOS.
  6. Replies
    2
    Views
    1,772

    http://forum.hwbot.org/showthread.php?t=165086

    http://forum.hwbot.org/showthread.php?t=165086
  7. Replies
    37
    Views
    18,210

    You can't save the profile between bios updates....

    You can't save the profile between bios updates. What you can do is save your options as a text file under Tool\Load/Save Profile from/to USB Drive. and then use Ctrl+F2 to save current settings as a...
  8. Replies
    37
    Views
    18,210

    Thermal Control is now relying on the CPU Package...

    Thermal Control is now relying on the CPU Package temperature instead of the on-board temperature sensor. It's more accurate and engages faster. There's also at least one bug-fix in there.
  9. Those temperatures are read directly from the...

    Those temperatures are read directly from the CPU. Are you able to test your CPU in a different motherboard to see if you still have this issue? Might also be worth to test USB BIOS Flashback in...
  10. The MRC Fast Boot option didn't help with the 55...

    The MRC Fast Boot option didn't help with the 55 after reboot?

    At 3600 you can probably tune it down to 15-15-38-1T + Write CAS Latency = 14
  11. Replies
    123
    Views
    40,677

    There is still a sensor, hopefully updated soon.

    There is still a sensor, hopefully updated soon.
  12. What if you set Fast Boot = Enabled under DRAM...

    What if you set Fast Boot = Enabled under DRAM Timing Configuration? My settings below.

    Ai Overclock Tuner [Manual]
    BCLK Frequency [100.0000]
    DRAM Frequency [DDR4-3733MHz]
    DRAM Voltage [1.4000]...
  13. I'd recommend you to aim for lower frequency with...

    I'd recommend you to aim for lower frequency with tighter timings. The Gskill 4266 2x8GB kit I have here can do 3733MHz 16-16-38-1T at 1.4V on Code, results should be very similar on Hero. Your...
  14. Replies
    7
    Views
    3,120

    M9 Hero MSRP 229 USD = 213 EUR + ~20% VAT = 255...

    M9 Hero MSRP 229 USD = 213 EUR + ~20% VAT = 255 EUR

    (using USD/EUR 0.93089)

    This is using 20% as an estimate of EU average VAT, and also not accounting for forex fees (typically 2%)....
  15. Replies
    32
    Views
    34,275

    The "red" header is for factory programming.

    The "red" header is for factory programming.
  16. Replies
    20
    Views
    27,721

    Where is it saying 2133MHz? See the picture...

    Where is it saying 2133MHz? See the picture below. The current running frequency is at Memory: 32768 MB (DDR4 3200). The DRAM Status is showing the reported JEDEC spec from the sticks.

    61026
  17. For accurate resulting voltage in Adaptive mode I...

    For accurate resulting voltage in Adaptive mode I suggest you try the below options

    Extreme Tweaker\Internal CPU Power Management
    IA AC Load Line [0.01]
    IA DC Load Line [0.01]

    CPU Load-line...
  18. I think if you select corrupt bios chip and then...

    I think if you select corrupt bios chip and then flash it USB BIOS Flashback to the exact same BIOS version as the working BIOS chip using it should work. I doubt your BIOS chip is damaged.

    If...
  19. Replies
    6
    Views
    2,885

    Yes, as long as you flash it with the R5E10 bios...

    Yes, as long as you flash it with the R5E10 bios first (for example using USB BIOS Flashback).

    For future reference if anyone needs cheap BIOS chips for R5E/R5E10
    ...
  20. If you power up the system to 00 POST code, then...

    If you power up the system to 00 POST code, then hold down the power button for 4 seconds to power off, does the BIOS switch button work after this?
  21. Replies
    31
    Views
    8,730

    You still need to flash the bios with XP support....

    You still need to flash the bios with XP support.

    In order to inject the driver you can use the method from here...
  22. Replies
    31
    Views
    8,730

    You need a BIOS which supports Windows XP, for...

    You need a BIOS which supports Windows XP, for M8F that would be 0018 from here http://forum.hwbot.org/showthread.php?t=142991 . Also check out the OC guide for instructions on how to install Windows...
  23. Replies
    9
    Views
    14,184

    https://rog.asus.com/forum/showthread.php?75377-Av...

    https://rog.asus.com/forum/showthread.php?75377-Availability-of-TPM-module-compatible-with-ASUS-Z170-Deluxe-motherboard
    ...
  24. If you plug in one card in slot 1 and one in slot...

    If you plug in one card in slot 1 and one in slot 2, with display output from the first, does both cards show up in GPU Post? You can also check if the two LEDs light up next to the PCIE-switch....
  25. Replies
    46
    Views
    21,305

    Most likely faulty board with a short circuit or...

    Most likely faulty board with a short circuit or damaged component somewhere. Since you tested several boards before I don't think that was your initial problem. As said before, ask for a new board...
Results 76 to 100 of 113
Page 4 of 5 1 2 3 4 5