Search:

Hi,
Dram slots there is two voltages one for each side
Set both to 1.4v see what happens it's safe so don't worry about it

Here's all my voltages for x99 currently I posted on ocn today...

Hi,
If the were a 5960x it would be labeled one and not 1680v3 at a much lower price.

But as on your thread I left some suggestions



Lastly try the last haswell-e bios right before...

Hi,
Maybe cut down on the 420 :)

Hi,
No just the normal optimus foundation copper plexi same as the little image on the test screen shot....

Hi,
Clear cmos to get rid of any xmp sludge see manual on how to properly do this with jumpers or board features.

Don't use xmp it's over rated and if you do do not accept option to enable Multi...

Hi,
You can't tell from the two images off the link to ocn ?
Optimus foundation winner by 3c in the pictures mounting coldest core to hottest core temp plus difference in core temps below 10c...

Hi,
lol
Yeah I guess you need to get your hands on one first :)

Hi,
I'm surprised tistou77 hasn't mentioned it

There's a new water block and watercooling company around in Chicago for us in the u.S. to seriously look at

I got a new Optimum Foundation...

Hi,
You won't regret it
It's darn good block
They will likely do vrm blocks to at some point so fear not :)

As you probably noticed they have some nice other goodies and will have radiators...

Hi,
Yeah rotating depending on where the hoses are located might help
Most do it because if the hoses come out the side on the block them get too close to ram.
If the hoses come out the face of...

Hi,
From what I'm hearing it's the 10 series doing that crap
Intel did it cpu requesting way too much core voltage
Manual core voltage is about the only way around.

Disable speed step and...

Hi,
Just sounds like a bad contact thing
Repaste see if it helps.
Make sure nothing is stopping the cpu block from touching the cpu.

Hi,
Stock air cooler is fine on the omega unless you just go for looks on a build mono blocks have been proven inferior to separate vrm and cpu water
combinations.
83704

Otherwise there is a...

Hi,
Increase DRAM REF Cycle Time +20 until it posts.

Hi,
Try these timings

Hi,
What's the problem
Device manager
System devices
Right click Intel management engine interface and select update.

Hi,
Okay so you're back to asking the same question again
My crystal ball is out for repairs you'll have to try the set you have and see for your self if it works or not :rolleyes:

B-die would...

Hi,
You can search for the item number and find the kit you have on g-skill website
Look on it's qvl list for your board.
If your board is listed you should be fine
If not it's a crapshoot.
...

Hi,
Yes remove ai suite.

https://rog.asus.com/forum/showthread.php?95038-AI-Suite-3-cleaner

Hi,
VGA yes if you don't have a real graphics card and only plan on using onboard graphics for monitor.

Chipset (MEI) yes

LAN yes

BIOS not really you don't say what bios version you're...

Hi,
G-skill looks like it has better tested latency 18-18-18-43 seems like samsung b-die to me

Corsair always has loose tested latency timings sure sign it's hynix memory.

Hi,
lol 3960x is a 24 core so 3970x is a 32 core ?
What's to say why compare either to a little 18 core 10980xe :D

3950x 16 core would be a closer match and better for a gamer.

But then again...

Hi,
Yes
Here's a better one though WD Black series & 970 evo plus ...

Hi,
That is not a M key m.2 is why it does not work
https://rog.asus.com/articles/guides/buying-an-m-2-ssd-how-to-tell-which-is-which/

Hi,
Don't take advice from 9900k users they have no clue what cascade lake-x or skylake-x will pull oc'ed to just 4.8
Not to mention pull out the wall which was nearly 1000w with no gpu load...