Search:

What Motherboard do you have? Your Specs show an older motherboard that has the latest BIOS of 1301. This thread is for Z370/Z390 motherboards. Your specs are for a Z270 motherboard.

Wow, I just gave my old PC with an Intel Core i7 930 to a friend. It has this Motherboard.
https://www.asus.com/Motherboards/P6T7_WS_SuperComputer/

That's odd. Sounds like a configuration issue. I installed RAMCache lll on my Maximus XI Extreme with no issues in regards to missing files. The issue I have is it prevents an offline checkdisk from...

This application prevents offline check disk from completing. It hangs at 100%. Offline means that you have to reboot so it can scan before the sign-in screen. Anyway, I have to do a hard shutdown...

Try it with XMP on and then off. If XMP was on then Turn it off and boot, then if skill error then turn XMP back on. Also update the UEFI/BIOS Firmware.

Download the ME Update tool from the MB support page. I have the XI Extreme as well and it is the same version as in here. The ME driver version in you post is also on the support website.

That should be fine. Keeps in mind that this card can only transfer 5GB/s. All USB ports on this card will share the 5GB/s bandwidth. If you are using all ports on this card then you will not get the...

Your Graphics card and sound card are in the correct slot types.
If you want the graphics card to stay at 16X then only use the smaller slots for any other cards which will use the PCH Chipset...

Actually is the OS can't see the OC then it definitely is needed of a reformat.

Someone said it fixes a memory issue.

I believe 1502 improved upon 1402. Still problems will occur with many people coming from 1302. Like I said earlier, I had to reformat to fix the issues when coming from 1302. As for your issue, that...

When I went from 1302 to 1402 I had to reformat my PC in order to get everything to work properly. I didn't have this issue when going from 1402 to 1502. My issue Going from 1302 to 1402 happened...

How and what did you use to install a fresh copy of Windows? Did you install Armoury Crate?

The three X1 slots use the PCH PCIe lanes which is 24 PCIe lanes. However those PCIe lanes get crunched down to 4 lanes going to the processor through DMI 3.0. The three X16 PCIe slots are directly...

If you look up the processor you will see that it can support up to 64GB. The issue is, if you want two channel support then you will need the same amount as what is soldered on the board. However...

If you want to use AmouryCrate, you need to turn it on in the UEFI firmware settings prior to installing the OS. Once you log-in to the OS you will get a prompt to install AmouryCrate. Install it....

Does the UEFI firmware see it? BTW, there is a new BIOS/UEFI update that came out yesterday.

To get that you need the ROG version "ROG Rapture GT-AC5300".

The Asus software has to be compatible for windows 10. If it is not compatible with windows 10 then it may or may not be there when you do the upgrade. Usually the Windows download tool will check...

It's not just the 2.4Ghz radio, it's everything. I believe it's the firmware. My neighbors have stronger signal than me (even when I am close to the router). And the device dropouts and disappearing...

Same thing happens with my ROG Rapture GT-AC5300 and I only have no more than 15 devices connected. No Mesh network. I live in a 1400 square foot apartment. the router is in the center of the...

I have to ask this question. Did you enable Samba 1.0 in Windows? If not then that is why. If you did then there is an issue with the router.

Yes it got an ME update check in the drivers and tools section under firmware.

Version 3.0.0.4.384.81695

Devices disconnect allot with this firmware build and the last 2 firmware builds. Also, the Charter spectrum's internet Wifi modem router combos in my building seem to...

Corsair (During Beta testing) had a plugin that you can install so that Aura Sync could control the Vengeance RGB RAM from within Aura Sync. Now their Out-of Beta release turned it around so that the...