Search:

Your refresh rate is most likely, almost certainly, 60Hz.

2 reasons why I say this:

1. It's not 3D capable

2. I have the G750JX and mine is 60Hz refresh rate :)

Nice laptop btw. I've had...

Hi Nate.

I tried BCLK, but it didn't give the benefits I was after, so I'm just sticking with 100.0 base. It wanted more voltage to match 4.5GHz, and the memory was only at 2333MHz.

It seems...

Ah... hang on...

Did you just go down to DRAM frequency and set it to 2400? You might not be using the right DRAM voltage/timings. Does your memory have XMP?

There is always a chance that...

Have you changed your Vcore voltage, or just left it on Auto? either way, your system should boot at 4GHz, but with Voltage on Auto, it'll probably use a lot more than it needs.

What exactly IS...

Hi Nate, I haven't tried BCLK yet, but have a look at this:

40820

I re-imaged my PC, re-ran RealBench, and got temps a lot closer to what I was getting before. By the end of the test, Core 5...

5GHz! Nice Nate! :D

Yeah, I know what BCLK does, and how it works (basically), I just didn't know if it worked well on this platform. I'll give it a shot sometime soon, and let ya know how I got...

hmm... ok, fair enough. just seemed to be high to me, especially as I was only in the mid-60's before.

Just out of curiosity, what vcore are you running to get 4.7, and what's your hottest core...

Things might be looking to be better than first thought!

I ran Memtest86+ overnight, and there were no problems detected.

The Motherboard, and BIOS are now much more responsive - as out of box...

I know man, especially as the CPU seemed to be quite a good one. Not amazing, but very capable.

I'm going to see if I can contact Corsair tomorrow, and let them know what's happened. I've already...

I believe it was my AX1200i that went. I didn't see the spark dead-on, I was looking at my monitor, and the tower is to my right, but I saw a flash in the corner of my eye that looked to originate...

It'll only run Prime95 Blend on stock core multiplier now, and it's still hitting 70°c. Anything above stock multiplier, and workers stop within seconds.

Vcore is at 1.25 (auto)

Bad news...

One of my GPU's blew up yesterday - there was even a massive spark inside the case. No leakage, or loose cables or anything.

My PC immediately died, but i got it going again once I...

Yeah, I was thinking vcore as well. I was already at 1.344v though, with a +0.020 offset, and want to keep it as low as possible.

It didn't like the +0.005 offset lol. trying 0.010.

also trying...

Hey man.

I had 2 workers stop after approx 90 mins, and games were crashing out on me. I don't think it likes the 2 kits AND an OC. It runs games fine with the 2 kits in XMP and NO OC though. I...

Ok guys, I think I'm finished :)

4.5GHz!

I've used an offset voltage of +0.030v, which takes the VCORE up to 1.344v when running Prime95 Blend. I ran the test for 40 minutes without any...

Hi again.

Prime95 Blend ran for 50 minutes with the above settings for 4.2GHz overclock before I stopped it to try and go higher. I'm now running it at 4.5GHz, and P95 has been going for about 15...

Ok peeps, I've had a bit of a play just now, and so far, things are looking good.

I left everything alone with regards to the configurations for running the 64GB of memory in XMP, and simply set a...

Ah, I left the VCORE alone, and just changed the VCCSA from AUTO to 1.25v. I ran P95 for 30 minutes without any problems before I decided to stop it.

So... no more problems with it not running P95...

Hi guys.

The RMA pocess took about 3 weeks, as the supplier had a major backlog of returns, but the new CPU arrived today!

I installed it, went into BIOS, and hit the old F5 key. Then I went...

Hmmm... strange.

If you only have 1 card, and there is absolutely nothing else in any other of the PCI-E (Graphics card) slots, then it should run at X16. I'm sorry to say it man, but you might...

Hi all!

It can depend on what socket your motherboard has, or your motherboard in general. The number of available PCI-E lanes for devices such as GPU's or PCI-E SSD's, and the layout of the slots...

Regards your overclock, you shouldn't have to do it again, but there's something I WOULD do if I were you.

1. Save your O/C to a profile in BIOS
2. Load optimised defaults
3. Install/Upgrade...

Hi!

Don't know if this will help you much, but it sounds similar to what I do.

I have Windows 8.1 on my RAIDR, and this is where Steam/Origin/battle.net etc is installed.

I also have 2...

Hi Praz.

Yeah, I'm aware that it can be a bit like that with mixing kits. I got 2 kits of exactly the same memory (I Know you meant that even with 2 of the same can be iffy). When I tested them on...

QC maybe?

Some chips are absolute DOGS... and I mean worse than mine (and that's hard to comprehend). I've to send it back to the outlet though, not to Intel, as I've only had it 4 days. They did...