Search:

What is cpu current capability ? I put 170%. It is any stability improvement or left on auto?

OK i listened to you. So LLC5 now. Voltage in uefi: 1.360V. Idle 1.350v. Game like BFV 1.314v-1.323v. Realbench 1.314v steady.

So keep it?:)

I was reading about that , and llc on my mobo working not like you said.

When i enter manual voltage 1.310v in bios. I have 1.375v in load . LLC7
So i entered 1.260v and have in real bench 1.305...

1.260V in uefi. realbench 1.305v and its stable. llc 7


But on llc 3 , 1.340v uefi, realbench 1 sec hang system. Hard reset. I think it goes too low and hangs?

load line calibration level 7 ( on level 6 not stable even with 1.305v in realbench,wheas or bsods )

Actually load line calibration set to level 7



So. I have entered in MANUAL VOLTAGE in...

On level 7 LLC realbench stable with 1.305 V ! wow
On level 6 LLV was bsod or whea. Now i am testing on level 7 1.305v and realbench fine

So using Load line calibration 7 can help? Before had level 6

Hi. So i used LLC7,but in uefi : manual voltage 1.270V.
Then on idle/gaming have 1.280v-1296v to 1.314v ( depending on load % ). On realbench max steady 1.314v stable.

Can i test metro with that...

Ok last question. I tested LLC and on level 7 voltage is increasing to 1.360v on load from 1.315 idle. Manual entered in uefi : 1.310V.


So i use level 5 LLC. Manual entered in uefi : 1.360V....

Nah it not crashes. I just left running game overnight for 9 hours. When i exit game i just checked for no reason event logs and 1 entry Whea Internal Parity was.

Anyway. I had voltage 1.315v. Now...

HI.

My pc:

9900K 5G OC manually overclocked to 5ghz
LLC level 6,all power limit maxed,sync all cores 50,core voltage was 1.315v. But now actually i bumped to 1.320v to see what happens.
...

Ok thanks Arne :) Really appreciate. Cheers.

Hey Arne.So a i dont must to test again if it passed 2xtimes for 4 hours?

So i made 2 stresst test,each 4hour and all passed without that mentioned errors. :) So i guess 2.56 ver is the most stable.
SO stick with 2.56?

I relized that i had 2.43 version. Now i downloaded 2.56 and see what happens lol. I checked 4 hours with 32gb ram.
I checked 4 hours with 32gb ram. So i am praying to not memory pagefile error and...

ok testing actaully and watching temps. Report later thx

I lower voltage to 1.315 i report later :) Watching temps and if will be stable i am praying :). I guess i find sweet spot. Temps are now...

Ok is any way to crank up fan speed of Noctua NH-D15 to improve temps? My mobo Asus Prime Z390-A


Also my gpu fan speed during test is 100% i have Aorus with 3 fan coolers. Should i lower fan...

But why realtemp show log in red when temp peak to 99C? Is this because 99C is thermal point TjMax? or 100C is Tjmax?

Have an question. My 9900K is oc to 5ghz with Noctua NH-D15. Stable vcore 1.320v. During realbench stress 2hours run max temps are 80-93+-. But when i run next 2 hours stress tests ,temps are 80-97+-...

Ok next issue. Get in 9 minute driver crash in luxmark. My 2080 Ti Aorus is overclocked but stable in 3dmarks,games etc i tested.
I tried to reproduce .Not again. I was getting on steam in...

something with ram issue?

Realbench after 2-3 minutes :"Cannot allocate required memory"

And event log said about virtual memory pagefile something. APp popup 26. No wheas,no bsod

It happened immidiately today after i...

yeah ok but i stopped at 100% no errors. Anyway can you answer me about that realbench situation?

SOrry i was mean 2x16GB :)GSKILL 3000MHZ have.


So that with REALBENCH was because pagefile or something ?


ps:
I am on 83% on IHC and no errors.

I testing rams...

I run REALBENCH with full amount memory 32GB RAM for 2 hours. It passed.But when i clicked run again just before test start ,said" Instability Detected". I check event log and it...