Search:

Try manual 1.36v LLC4

Adaptive uses VID and your offset will add voltage to an already high vid

Page 1-12 of the manual has all you need to know to make a decision...the info there is more pertinent to making a choice than temps....temps should not be an issue anywhere with adequate cooling
...

https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

1.5 is kind of the limit....tune SA and IO volts for stability too....maybe less VDIMM needed if you tune those rails. However for 24/7 use running any frequency or timings that need that voltage is...

4.2 all core usually gives semi decent temps on AIO...but really for most things they are better left at stock with PBO settings maxed out and the CPU will cycle the cores at higher boost speeds.
...

Cheers for the heads up...

No real performance boost that I can see....yet

Yeah that bloke is a looney :o

Anyway...someone else to listen to

https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

Dont

Do you have the slow mode switch on? Strange power plan settings?

The CPU will throttle if it is too hot. And you have a small amount of thermal capacity in the block and water will move by convection slightly....so....all in all you should be OK if it was a short...

:D Zka17

Just to add...t topology boards with 4 slots often run best with 4 sticks...4x8 instead of 2x16

In Boot settings menu there is a delay timer in seconds...often set to 3 seconds default....change that to 0?

Try 1.36v for vcore at LLC5 for 5.1GHz and try 1.05v VCCIO and 1.1v VCCSA for the RAM.....you can also try....say....1.365v vor DRAM voltage

Make sure long and short duration power package limit...

Are there any updates on timeframe for this fix?

Thanks

Yes perfectly normal...as long as it doesn't hang there for long ;)

RealBench and Karhu RAMTest will reach the parts other stress tests cannot reach...and quicker, without current degrading your CPU

Just use BIOS flashback method to 1402....1502 has many RAM kit problems...

AFAIK this is a known issue with armoury crate and is waiting a fix in the new version which is supposed to drop "soon"

To be honest I don't....I have tested it but it behaves the same as the previous one as far as OC performance and RAM stability for the stuff I am testing

In many situations....extra what's can be fatal

85467

It might not be official official...but if Shamino posts it, it's official and that's official...unofficially....

Temperature is a huge influence on max boost

That said you could try increasing max boost by 200MHz on PBO...this might free up the headroom a bit

These CPUs need good watercooling to free...

Use a good thin layer of paste. Prolimatech PK-1 or Hydronaut

Why? because they work well to transfer heat from your CPU

Laziness to repaste is no excuse to run a thermal pad on a 3950X

Do...

The AIO header is made for the AIO pump...the CPU header is for the Fans

It might work...it might not...as has been said you should buy a single kit at the rated speed and density you want. Combining kits is a gamble.

However if the CPU has a good IMC you might get...