Search:

Type: Posts; User: Lismail0

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. I custom ordered my g74 from xoticpc with the i7 ...

    I custom ordered my g74 from xoticpc with the i7 2760 and it works great never overheats even will gaming the hottest i've ever seen is like 71 or so. I'm very happy with it.
  2. Well fostert, I'm now having trouble with the...

    Well fostert, I'm now having trouble with the Kingston hyper x 1866 8GB kit. About a week ago my computer started to blue screen. It will blue screen about once every time I turn it on. So I decided...
  3. I would do a memstest with both of them installed...

    I would do a memstest with both of them installed Xxosloxx. Mine worked awesome for a while then started to cause a lot of blue screens until the point I couldn't boot into windows.
  4. The slight OC gives that little boost that i need...

    The slight OC gives that little boost that i need while playing skyrim on ultra high settings. I also have seen a slight improvement in smoothness with my new ram!
  5. Yeah I'm running stable now with 880-1760-1600...

    Yeah I'm running stable now with 880-1760-1600 using msi Afterbuner as well. My driver is the latest beta driver though (290.53). But my WEI index maxes at 7.3 as well. I guess that's better than...
  6. I just re-ran the WEI with a overclock and got...

    I just re-ran the WEI with a overclock and got 7.3. Are you guys running a GPU overclock and what drivers do you have?
  7. OK so the Kingston 1866 8GB kit came today and...

    OK so the Kingston 1866 8GB kit came today and here are the results!

    <-Slots 1 and 2->

    dram freq->931.3-931.5
    Fsb : Dram->1:7
    Timings->11-11-11-31 (Dual Channel)
    Command Rate->1T
    Memory...
  8. You tried more than your best! I will update...

    You tried more than your best!

    I will update the post when i get some results out of the Kingston ram. I going to try arranging the ram in different was as i did the Corsair ram and see what...
  9. I already took out the corsair ram and i am out...

    I already took out the corsair ram and i am out of town but i will test it out just to see when i get back home just for the hell of it. Even though i am pretty sure its in single channel because...
  10. The only reason that I think it is running in...

    The only reason that I think it is running in single channel is because memtest claims that it is when the ram is installed into slots 1 and 3. If it were in fact running in single channel mode that...
  11. So would i get more performance out of the...

    So would i get more performance out of the kingston ram in dual channel with the faster clock or the corsair ram in single channel with the slower clock but faster timings?

    Because i'm on the...
  12. With the new ram in slots one and three the dram...

    With the new ram in slots one and three the dram was 665MHz and the timings were 6-6-6-20 single channel. So yes they are the same as cpu-z

    whenever i install the ram if at least one stick isn't...
  13. That is very interesting fostert thanks for the...

    That is very interesting fostert thanks for the insight.

    I've been doing some more testing and i was able to boot into a flash drive memtest with the corsair ram installed in slots one and two...
  14. OK so I decided to do a few test and share the...

    OK so I decided to do a few test and share the results. I used CPU-Z to gather the information.

    -Original ram installed into slots 1 and 2-
    *Dram Frequency: 665.3MHz
    *FSB : DRAM :1:5
    * Timing:...
  15. Well I tried installing the ram in slots 1 and 3...

    Well I tried installing the ram in slots 1 and 3 and it seems to be running smoothly so far. I've booted into windows and have been messing around for about an hour or so with out a single blue...
  16. I'm not sure I can check the event log because...

    I'm not sure I can check the event log because i'm running on a clean installation since the crashes. But I will try and install the ram in slots 1 and 3 and see if that runs smoothly. Either way...
  17. G74SX Issue with Corsair vengeance 1866MHz speed ram

    For Christmas I got the 8GB Corsair Vengeance 1866MHz upgrade kit. So I took out my battery and held down the power button for 30 seconds to drain the electricity from the board. I then removed my...
  18. Replies
    43
    Views
    46,785

    Poll: I was wondering if anyone knows if the Ogio...

    I was wondering if anyone knows if the Ogio Squadron backpack will fit the g74. Ogio claims the squadron fits "most" 17'' laptops but I know that the g74 isn't like "most" laptops. Anyways it would...
  19. Replies
    20
    Views
    7,606

    OCZ Vertex 3 120GB -23 sec boot- That includes...

    OCZ Vertex 3 120GB -23 sec boot- That includes like 6 programs and the important drivers of coarse.
    But my actual system boot is always at or under 11 sec!

    I use a free program called Soluto...
  20. Replies
    18
    Views
    24,542

    I currently have 14GBs of ram in My G74SX-DH73-3D...

    I currently have 14GBs of ram in My G74SX-DH73-3D so I think that's false.
  21. Replies
    2
    Views
    4,292

    G74SX windows experience rating Question

    I recently did a clean install of win 7 pro on my G74SX-DH73-3D. Updated all of the drivers and everything seems to be running fine for me. I absolutely love this laptop!

    But... when I ran the...
  22. Replies
    5
    Views
    4,835

    Well what do you know. The guys over at XoticPc...

    Well what do you know. The guys over at XoticPc didn't find it necessary to reconnect the white and black antenna leads after installing my new CPU and I overlooked it when I installed my SSD (I...
  23. Replies
    5
    Views
    4,835

    linksys wrt54gs g and b signal. nope. yes i...

    linksys wrt54gs g and b signal. nope.

    yes i restarted them both.

    yes, and its the only one in 200 yards.

    The device is working properly.

    wps personal.
  24. Replies
    5
    Views
    4,835

    G74sx-dh73-3d Wifi issues... :(

    I just installed my vertex 3 in my G74 and did a clean install of win 7 pro 64bit, updated windows, and updated all of the needed drivers from the forums (I think?).

    My issue is when i try to...
  25. Replies
    10
    Views
    6,332

    OK well thank you all so much for your input! It...

    OK well thank you all so much for your input! It just arrived via ups and I am ready to dive right in. I let you know how it turns out!
Results 1 to 25 of 26
Page 1 of 2 1 2