Search:

Type: Posts; User: samuel9521

Search: Search took 0.00 seconds; generated 5 minute(s) ago.

  1. Replies
    32
    Views
    6,888

    Well, try disabling SVID Support and set the AVX...

    Well, try disabling SVID Support and set the AVX negative offset to 0, then try a manual setting of CPU voltage, without any kind of offset. You can see in my screens I posted how I set up the...
  2. Replies
    32
    Views
    6,888

    Nice, I think you shouldn't try to increase...

    Nice,
    I think you shouldn't try to increase frequency, because your RAM is built to run @3466, but it could work increasing the voltage. Mine run @3866 at 1.42V, but it's their out-of-the-box speed....
  3. Replies
    32
    Views
    6,888

    Crucial recommends 3466MHz with timings...

    Crucial recommends 3466MHz with timings 16-18-18-38, command rate 2N (or 2T), at 1,35V. Have you tried these settings?
  4. Replies
    32
    Views
    6,888

    Hi Bronson, nice to see that you didn't give up...

    Hi Bronson, nice to see that you didn't give up :D

    Here I attached screenshots of my stable bios settings for 5GHz. I think you should try to overclock your system in an ordered way as I did (the...
  5. Replies
    32
    Views
    6,888

    Actually I had some random crashes at 5.1GHz, so...

    Actually I had some random crashes at 5.1GHz, so I went down to 5.

    Note that my settings may not work with your system, exceptionally for DRAM settings.

    My current settings are:



    AI...
  6. Replies
    32
    Views
    6,888

    Ok I tried lowering the voltage below 1.39V...

    Ok I tried lowering the voltage below 1.39V @5.1GHz, but it's unstable.
    With that voltage, I managed to set the max cache ratio at 45, and the system passed aida64 stress test and various...
  7. Replies
    32
    Views
    6,888

    Overclock i5-8600k with some benchmarks

    Hi All,
    I have an intel core i5-8600k overclocked to 5GHz at 1.33V, but I tested it at 1.39V @5.1GHz, and it seems to be stable.
    Do you think it's safe to set this voltage for everyday usage?...
  8. Replies
    7
    Views
    5,020

    SOLVED (maybe)

    Ok I think I solved the problem, I replaced the cpu with another 8600k and now the pc works with all the 6 cores. I won't overclock it for a few days in order to understand whether the problem was...
  9. Replies
    7
    Views
    5,020

    Yes, I tried booting at default settings from the...

    Yes, I tried booting at default settings from the pen drive in which I put the OS, but nothing has changed, it just continues to crash in loop on boot before showing anything.

    Edit: I tried...
  10. Replies
    7
    Views
    5,020

    I've just noticed that when I turn on the pc...

    I've just noticed that when I turn on the pc after putting it in current, it turns on and instantly turns off for two times, then it boots up. That makes me thinking it could be an alimentation...
  11. Replies
    7
    Views
    5,020

    Problem with Strix Z370-F and i5-8600K

    Hi All,
    I have a weird problem with my system:

    A few days ago I assembled my new mobo and cpu (Strix Z370-F and Intel Core i5-8600K) in my pc, after uninstalling some drivers and softwares for...
  12. Yes but it's only a temporary solution, i'm going...

    Yes but it's only a temporary solution, i'm going to buy a real gpu soon :p
  13. Well I lowered the timings for an higher...

    Well I lowered the timings for an higher bandwidth, and my ram can run with those ones at a relatively low voltage, but the XMP profile uses different timings and frequency.

    So the only thing...
  14. I tried with different voltages combinations,...

    I tried with different voltages combinations, setting the DRAM Voltage to 1.5 and both VCCIO and VCCSA to 1.4, but nothing changed.

    The fact is that the motherboard actually supports ram at 3866,...
  15. Problem with Strix Z270-F and G.Skill Trident Z RGB 2x8GB @3866MHz

    Hi All,
    I have a problem with my ram, and I hope you can help me.

    I bought a Strix Z270-F with an i7-7700k and these G.Skill ram: F4-3866C18D-16GTZR. The problem is that I can't run them at...
Results 1 to 15 of 15