Search:

Type: Posts; User: drossxyu

Search: Search took 0.00 seconds.

  1. Don't worry guys, I haven't disappeared. :cool: ...

    Don't worry guys, I haven't disappeared. :cool:

    Had to abandon troubleshooting the past couple days to actually get some work done. I threw another 2080ti in my machine in the process.
    One is an...
  2. I appreciate your suggestions but I don't even...

    I appreciate your suggestions but I don't even want to OC my CPU at all. I just want it running stable at stock speeds with 'XMP On' so that my RAM specifications are entered properly. I currently...
  3. What are my options for RMAing this board? It was...

    What are my options for RMAing this board? It was purchased less than a year ago via Amazon.
  4. Why donít you think itís bios related? *There are...

    Why donít you think itís bios related? *There are tons of posts that suggest that certain BIOSs are more stable than others. *

    The usb stick is in the right slot. *Itís surrounded by a white box...
  5. I tried my best to get 1503 on this board via USB...

    I tried my best to get 1503 on this board via USB Flashback but to no avail. Solid light every time. It's a fat32 usb stick as required. Tried resetting the CMOS.

    I installed 1902 instead and it...
  6. I will look into that this evening. So in...

    I will look into that this evening.

    So in theory, If i'm able to roll back to 1503, I should be able to enable XMP without issue or will I have to still manually enter my RAM specifications...
  7. I've flashed my BIOS once before but I've just...

    I've flashed my BIOS once before but I've just heard all this talk on the forum that the older and arguably more stable BIOS version do not exist on the official download page.

    I've downloaded...
  8. I am excited to hear I am not alone. So how do I...

    I am excited to hear I am not alone. So how do I get my hands on 1503?
  9. Hi Johnny. That is reassuring. The RAM is a...

    Hi Johnny. That is reassuring.

    The RAM is a matched kit that is on the QVL list.

    I have tried singling out the video card. I have a 2070, 2080ti, another 2080ti on the way, and a 980ti. I've...
  10. When i'm on "optimized defaults" which includes...

    When i'm on "optimized defaults" which includes XMP Off my system is more stable during normal use but will eventually lock-up once
    under heavy load such as rendering.

    How do i check if my CPU is...
  11. I'm not sure because it happened to be behind a...

    I'm not sure because it happened to be behind a window when it locked up. I'll have to try it again with no other distractions.

    I've run memtest in the past but most likely with XMP off and...
  12. Replies
    11
    Views
    1,848

    Where might I find the 1401 BIOS. Is it floating...

    Where might I find the 1401 BIOS. Is it floating around somewhere? I'm stuck on 1704 with nothing but issues and would love to roll back.
  13. Ran it for 49 min reaching 927% coverage. 0...

    Ran it for 49 min reaching 927% coverage. 0 Errors.

    Despite this I opened up CPU-Z and noticed my DRAM Freq and timings are wrong.

    They should be :

    ~1600mhz (half of 3200)
    14-14-14-34-2N
    ...
  14. And to answer your QVL question. Yes, my ram is...

    And to answer your QVL question. Yes, my ram is on the list if your search for "F4-3200C14Q-64GTZSW".

    Running RAM Test right now for the past 15 min. Error Count 0. I'll run it for a longer...
  15. G.SKILL TridentZ Series 64GB (4 x 16GB) 288-Pin...

    G.SKILL TridentZ Series 64GB (4 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 (PC4 25600) Intel Z370 Platform / Intel X99 Platform Desktop Memory Model F4-3200C14Q-64GTZSW

    I'll give that test a try. ...
  16. So no one else is able to share their experience...

    So no one else is able to share their experience getting this board running stable? *Has everyone else dumped it for something else?
  17. If it's not overlocked when set to the default...

    If it's not overlocked when set to the default settings, then no it's not. Is there some indication that makes you think the CPU clock speed is causing the instability? Genuinely
    curious.

    Do...
  18. Giving Up On The Rampage VI For GPU Rendering

    Is there anyone in this community that has successfully found the right combination of BIOS and settings to get
    this board to run without either locking up or getting a BSOD while under heavy GPU...
Results 1 to 18 of 18