Search:

Type: Posts; User: Saltgrass

Page 1 of 16 1 2 3 4

Search: Search took 0.01 seconds; generated 81202 minute(s) ago.

  1. Replies
    10
    Views
    781

    It appears your devices are on the 2.4 GHz...

    It appears your devices are on the 2.4 GHz network, can they use either 5 GHz or ethernet? Any Microwave ovens or wireless Phones around?

    The reason for Deauthorizing is always the same, sending...
  2. I also just got another firmware upgrade from a...

    I also just got another firmware upgrade from a 41xxx to 43xxx.. I will check that out using the system with Wi-Fi 6 GHz capability..
  3. I asked you this question and you sort of skipped...

    I asked you this question and you sort of skipped over the answer without actually giving one. This is what I found to be the answer to that question.

    If you have had Win 10 forget all your known...
  4. Maybe when Windows 11 comes out in late October,...

    Maybe when Windows 11 comes out in late October, (probably Halloween ;) ) it will clear some of this up. I have not tried running a Mesh system again but maybe I will now that my 6 GHz radio is...
  5. Replies
    10
    Views
    781

    I will try to look through your logs but since...

    I will try to look through your logs but since mention it, do you have the new Firmware?
  6. If you decide to update your Wi-Fi drivers, it...

    If you decide to update your Wi-Fi drivers, it will probably only install the 22.60.0.5 version.. The 22.70.0.5 version appears to make Wi-Fi 6e usable and Microsoft is saving that for Windows 11..
  7. Replies
    7
    Views
    486

    You did not answer the question as to whether you...

    You did not answer the question as to whether you were using Ethernet or Wireless Backhaul.. or at least I don't think you did..
  8. GT-AXE11000 6GHz radio seems operational in Win 11 Insider.

    This morning, and after a year of waiting, I received the Intel Wi-Fi driver 22.70.5. After that driver installed, the 6 GHz radio appeared in my list of available networks and I was able to sign in...
  9. When you tried different HDMI cables, did you...

    When you tried different HDMI cables, did you check the quality to make sure it could handle that version of HDMI?

    Have you tried connecting to different monitors? Does the monitor you are using...
  10. Replies
    7
    Views
    486

    I was just wondering if you were using an...

    I was just wondering if you were using an Ethernet Backhaul configuration? If you were using Wi-Fi as Backhaul, the fact the 6 GHz radio doesn't seem to work would limit you to just the two other...
  11. Let's try one more thing. When you are connected...

    Let's try one more thing. When you are connected to the "Open" network, if you look in settings, Wi-Fi-, it shows the network profile type. Look down below the SSID section and see what the...
  12. There is a lot of smoke being blown around...

    There is a lot of smoke being blown around regarding the FINAL restrictions placed on folks running the Public. For Instance, the 7th Gen Intel processors will be excluded or so it seems.

    You...
  13. If the 68U had an open network then you could get...

    If the 68U had an open network then you could get on it without a password. Just like I can get on the 6 GHz network when it is set to open..

    Can you log on to any of your networks without a...
  14. Sometimes it is hard to understand certain...

    Sometimes it is hard to understand certain aspects of the settings. But I can put a password in the 6 GHz radio, I just can't sign in to that from my computer. It says the radio is using an out of...
  15. What you are pointing out has been known for a...

    What you are pointing out has been known for a while. But since your mesh notes cannot see the 6 GHz radio, it is doing something else, possibly related to the Back Channel. If you figure it out...
  16. Replies
    15
    Views
    1,384

    I was mistaken, when I run msinfo32 as admin, it...

    I was mistaken, when I run msinfo32 as admin, it does show the same thing on my system.

    I do not run BitLocker.. I will assume you know what Modern Standby is..
  17. There was a setting with options of Standard or...

    There was a setting with options of Standard or Customized. I had no idea what that meant unless it was referring to the CSM which used to be, and might still be, in another section.
  18. You might check in the Secure boot settings, I...

    You might check in the Secure boot settings, I think there were some changes with those.
  19. I found the site below which describes TPM and...

    I found the site below which describes TPM and PTT very well. It is a Third Party site so be careful.

    https://www.onlogic.com/company/io-hub/intel-platform-trust-technology-ptt-tpm-for-the-masses/
  20. I just did mine with the Bios flashback mode.....

    I just did mine with the Bios flashback mode.. Everything seems to be operating normally. One thing I did not expect was seeing the 4 red LEDs on my video card flashing..

    What I learned and...
  21. @sl910, can we assume you actually updated your...

    @sl910, can we assume you actually updated your system?

    @berglake, how did you do the Bios update?
  22. There are several threads about this already. It...

    There are several threads about this already. It has been pointed out the XIII has an option in the Bios Advanced Section PCH-FW option to enable the PTT. If you find it you can do that and when I...
  23. I have the Router and keep the 6 Ghz radio on...

    I have the Router and keep the 6 Ghz radio on but keep it secured with the WPA-3. I do not know what that SSID is but it does show as one of your networks? You can sign into it? In my area, I do...
  24. Replies
    15
    Views
    1,384

    All the current info does come from the Windows...

    All the current info does come from the Windows Insider forum. As mentioned, the DEV channel is supposed to get it next week. The Beta channel, probably not until late August, maybe..

    Things are...
  25. Maybe a couple of things. When did a media...

    Maybe a couple of things. When did a media bridge get involved in your situation? You stated you were using a MESH node.

    It sound really strange to me that certain components have problems at 3...
Results 1 to 25 of 382
Page 1 of 16 1 2 3 4