Search:

Type: Posts; User: DjRavix

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Broken Fan Controller that Came with my M13E

    on 3 May 2021 I have Requested a An RMA for the Broken Fan Controller that Came with my Maximus XIII Extreme
    The problem was that the RGB showed the Wrong colors when connected to controller and...
  2. Did you install the plugin for Aura support from...

    Did you install the plugin for Aura support from the Corsair website ???
    If you need to reinstall I recommend to install that Plugin before installing any of Asus there Aura Software
    Also use the...
  3. So here is a Little update I noticed that...

    So here is a Little update

    I noticed that there was an update for "Device & Component" that was marked as "Memory"
    And I looked into Aura Creator to see if it would appear there ... and it did...
  4. Yeah ... A bit more information on your situation...

    Yeah ... A bit more information on your situation might be useful

    If I recall correctly the WD_BLACK AN1500 is an PCIe Card
    However it's unclear in what slot it is installed (some PCIe Cards...
  5. Yeah that is true but USB 2.0 interfaces have...

    Yeah that is true but USB 2.0 interfaces have become a lot better and firewire interfaces are really hard to find these days (Not to forget that you need a TI based firewire card since those work...
  6. From digging a bit into the Manual I found that...

    From digging a bit into the Manual I found that the Bottom X16 Slot will actually disable some Sata ports (Sata6G_12 & Sata6G_34)
    There is no way around that that
    if the 2080ti you have is a 3...
  7. Replies
    4
    Views
    365

    The SATA6G connections are mainly used for...

    The SATA6G connections are mainly used for connecting extra SSD / HDD / ODD
    the board has a total of 6 but if you want to use the thunderbolt Card you might have to disable the last 2 of these (5 &...
  8. it depends on the power draw of the devices ......

    it depends on the power draw of the devices ... if the total does not exceed the 3A your fine
    if it does you might want to confider A Powered ARGB Hub or an extension cable that Provides power...
  9. Replies
    4
    Views
    365

    If I may ask ... is there any participle device...

    If I may ask ... is there any participle device you need thunderbolt for ?

    Looking from what you are saying the board you have is a "ROG STRIX Z590-E GAMING WIFI" if I am correct
    That board...
  10. Replies
    11
    Views
    689

    just posted this for somebody else 88805 ...

    just posted this for somebody else

    88805

    You can actually set the GEN per PCIe Slot
    So you might want to try setting "PCIEX16_2" to Gen 3 to see if this solves the problem
    if it does than we...
  11. Silly Question but .. What slot is your NVMe...

    Silly Question but .. What slot is your NVMe drive installed in ???
    If it is installed in M.2_1 or M.2_2 you might want to change some settings in your bios

    1st one is important for using M.2_1 &...
  12. Replies
    5
    Views
    160

    if the board has a Thunderbolt header it is...

    if the board has a Thunderbolt header it is possible but then you need to use the included Display port cables to go from your GPU to the Thunderbolt card
  13. Replies
    5
    Views
    160

    uhm ... If it's a Thunderbolt port it will...

    uhm ... If it's a Thunderbolt port it will probably work but this is also dependent on the CPU

    it also depends on what you mean by "improve the graphics" ...
    Better image Quality, Maybe ... ...
  14. You might want to test if running your RTX3090 in...

    You might want to test if running your RTX3090 in x8 makes a difference to running it in x16
    if it does not make a difference than than you might be better of using it that way and putting your WD...
  15. unfortunately you did not say that you tried the...

    unfortunately you did not say that you tried the Dimm.2 first
    you actually started about the slots on the board
    You did not say that you tried A Cmos reset or updated the bios (Only that you...
  16. RTFM Regarding the CPU Lanes: Intel® 10th...

    RTFM

    Regarding the CPU Lanes:

    Intel® 10th Core Processors:
    - M.2_2 supports PCIE 3.0 x4 mode M Key design and type 2242 / 2260 / 2280 PCIe storage devices
    - M.2_2 slot shares bandwidth with...
  17. Replies
    11
    Views
    689

    if it does automatically detect that there is a...

    if it does automatically detect that there is a card in the second x16 slot the first slot will run at x8
    this is pretty normal behavior since it shares the 16 GPU allocated lanes
    The only thing I...
  18. Replies
    11
    Views
    689

    Have you tried Reinstalling the drivers for the...

    Have you tried Reinstalling the drivers for the card ???
    ithe x4 Slot is connected to the chip-set while the x16 goes to the CPU
    also in the bios set the lanes x8 + x8 or x8 + x4 + x4
    in the last...
  19. Have you installed the Aura Plugin that is on the...

    Have you installed the Aura Plugin that is on the Corsair website ?
    and also this might be useful...
  20. Replies
    9
    Views
    398

    He needs to drain his loop to change this ......

    He needs to drain his loop to change this ... it's a lot of work
    if he wants to access the M.2_1 or M.2_2 slots he will need to remove his GPU ... since the GPU has an EK block means draining the...
  21. Replies
    9
    Views
    398

    If I recall correctly there are some settings for...

    If I recall correctly there are some settings for this in the Bios
    You have the options to set x16 / x8 + x8 / x8 + x4 + x4
    The last one also has 2 options that allow the 2nd Full size PCIe on x4...
  22. Replies
    9
    Views
    398

    the 3 slots on the board are all Gen 4 If you...

    the 3 slots on the board are all Gen 4
    If you want to run your GPU at x16 you need to use the top slot (M.2 3 I believe)
    in your case this will be the one that is also cooled by the monoblock
  23. Replies
    6
    Views
    868

    You can actually make it work properly with Aura...

    You can actually make it work properly with Aura Creator if you like (Since your board only has one ARGB Header)
    The only thing you will need to do is set the Swap the Color amount numbers between...
  24. Replies
    1
    Views
    151

    Should be possible ... however I have not seen...

    Should be possible ... however I have not seen any way to change the PUMP Headers to be % controlled only seems to be temperature controlled from within fan xpert

    Also note that 2 Noctua Fans will...
  25. Replies
    6
    Views
    868

    There is no calibration option for ARGB strips...

    There is no calibration option for ARGB strips only for RGB as those have individual wires per Color

    Please note that the links you provide are both not listed as "Aura Compatible"
    However the...
Results 1 to 25 of 75
Page 1 of 3 1 2 3