Search:

Or perhaps was accidently loaded with perseverance and is now with the rover on Mars?

If you want to test things now just use 0070 for the encore board posted by Shamino in this thread on page 2, post #13. Rebar working fine for me with this bios. But I agree, don’t know what’s taking...

Here’s a review on the rebar topic:

*https://www.techpowerup.com/review/nvidia-pci-express-resizable-bar-performance-test/

United States

Can't buy a 3090 strix anywhere. Any ideas where to obtain one besides ebay of course? Thanks.

Check out the links in post 39 one page back.

That’s really cool. Thanks for the update. Is there any advantage to this compared to monitoring the temperature via SSD software? Any pictures of your upgrade?

Sorry for the late reply. It has occurred only once. I can't reproduce again myself so far. It was quite peculiar. Thanks.

Well, this is weird. With 3.3.7.0 I clicked on my R6EE board and the OLED settings were not available. ?? Worked OK a few hours before with no problems at all. Only the shutdown effect, addressable...

Let us know what you find.

I haven't connected anything for my Intel 905p, but I do have temp readings on the Intel memory and storage tool. I suspect other SSD manufacturers have the same capability with their tools as well....

Yea. That kit is not on the QVL. And I’m not using xmp at all with my encore board. Couldn’t get it stable with xmp. Manual settings work best for me.

Seems about the same to me too.

Just noticed this article on the new chip.*

*https://www.techpowerup.com/278110/intel-xeon-sapphire-rapids-lga4677-x-processor-sample-pictured

Yes, that's the confusion. The package version is the 2101.15.... but the driver itself is 2047. Thanks.

There's a new MEI version on the download page for the R6EE, Version 2047.100.0.1039, but when I downloaded and installed it, it's version 2101....... Any ideas??

Thanks. I’ll probably update later today.

Any issues with installation or any negative effects? Thanks!

I think it got screwed up as I was posting using an ipad. To clarify, I was saying that the bios you asked about (0070) was indeed most likely to be for the R6EE as I have been using the nonmodded...

That’s most likely R6EE. I’m using the 0070 bios now on my R6EE just unmodded currently. I would wait for him to confirm though. Â*

I was reading that this new feature is nonproprietary, so it can be enabled on a variety of systems. I suspect since Shamino posted a bios with this feature that full access will follow in a few...

I don’t know. I haven’t seen a V/F editor in the bios as you describe. I’m just not sure about this. Hope someone can shed some light on your question.

Here’s an explanation:

Â*Â*https://www.notebookcheck.net/NVIDIA-s-Resizable-BAR-coming-to-all-Ampere-RTX-3000-cards-soon-as-a-Smart-Access-Cache-alternative.503981.0.html

Here’s the link in...

There’s a setting for enabling rebar Â*in that bios, and it’s dated 1/4/21 I think.Â*

Might consider Shamino’s 0070 version in the rebar thread too.