Search:

Type: Posts; User: chris k

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    196

    Is it just wifi dropping out or are wired...

    Is it just wifi dropping out or are wired connections getting dropped too? Are the wifi drops on both the 2.4 and 5ghz bands? How many devices do you have connected to the wifi on each channel? What...
  2. I just re-read this post and I think I...

    I just re-read this post and I think I misunderstood the original question. Yes, you should be able to manually configure each console's port forwarding rules and yes, you should be able to achieve...
  3. Good info on upnp, also something I haven't used...

    Good info on upnp, also something I haven't used in a few years. For basic xbox live features:
    These ports must be open for Xbox Live to work:

    Port 88 (UDP)
    Port 3074 (UDP and TCP)
    ...
  4. The ports would depend on the game. Just Google...

    The ports would depend on the game. Just Google the needed ports for the game you're playing. I seem to recall that consoles were dependent on upnp but I'll admit that I haven't used a console in...
  5. Have you tried turning off Open NAT and just...

    Have you tried turning off Open NAT and just manually setting up port forwarding?
  6. That did it. Thanks!

    That did it. Thanks!
  7. Did you you anything special to get 160 to work...

    Did you you anything special to get 160 to work on ax92u? I have 160 enabled but still only getting 80. I've tried to disable wmm as was suggested for the ax11000 but the disable option is not longer...
  8. Go to administration -> firmware upgrade

    Go to administration -> firmware upgrade
  9. Try disabling ipv6. The reboot issue was a...

    Try disabling ipv6. The reboot issue was a problem but the last firmware update in September seemed to fix it so, if you haven't already done so, make sure firmware is up to date and after that, do...
  10. 2.156 was the most recent update. Same signature...

    2.156 was the most recent update. Same signature version on the rt-ax88u. There was an update today to version 2.158 for both routers.
  11. You should get signature updates automatically. I...

    You should get signature updates automatically. I just got one on Dec 27th to version 2.156. What happens if you try to manually check for signature updates from the firmware upgrade page under...
  12. I learned with the gt-ac5300 not to expect...

    I learned with the gt-ac5300 not to expect firmware updates at any regular frequency and that Asus is going to focus their efforts on firmware updates on the routers that have sold the most, not the...
  13. Replies
    2
    Views
    322

    I have my WAN DNS set to manual using Google's...

    I have my WAN DNS set to manual using Google's DNS servers and haven't had any issues. What other settings do you have enabled?

    Did you do an "initialize restore" after the last firmware update? ...
  14. You might try setting the 2.4 wireless mode to N...

    You might try setting the 2.4 wireless mode to N only, disable 802.11ax/wifi6 and as Lekkerlanglikken said,set the channel bandwidth to 40mhz. Make sure smart connect is disabled. If you have...
  15. Personally, I would disable smart connect and...

    Personally, I would disable smart connect and just set each network device up to whichever band you want that way they won't decide to change bands on you. Assuming you are talking about the system...
  16. Replies
    4
    Views
    2,453

    Aimesh with wifi is broken on the GT-AX11000....

    Aimesh with wifi is broken on the GT-AX11000. I've tried with multiple devices, RT-ax88u, rt-ax92u, gt-ac5300, rt-ac5300. Never finds anything. Unfortunately using LAN is just not an option for me.
  17. Replies
    6
    Views
    859

    Honestly, I would go with an RT-AX88u or TP-link...

    Honestly, I would go with an RT-AX88u or TP-link Archer AX6000. I have both plus the GT-AC5300, RT-AC5300 and Netgear r9000. Both AX routers are working without issues and I highly recommend both....
  18. Sticky: Day 7 with TP-link Archer ax6000: no wireless...

    Day 7 with TP-link Archer ax6000: no wireless drops, no dns issues, no qos issues and no need to reboot the router. All bridges and repeaters, not to mention pc's and phones, on my network STAY...
  19. Sticky: Having to reboot the router almost daily for...

    Having to reboot the router almost daily for wireless clients to be able to connect. I'm using the GT in a business office with up 35 devices that need to STAY connected. This router has been out...
  20. Sticky: No problems for me with mac showing but I don't...

    No problems for me with mac showing but I don't have smart connect enabled. DNS seems to be the biggest issue for me. I have a server handling DNS and the GT seems to block DNS settings from the...
  21. Sticky: I ended up doing another reset after repeated...

    I ended up doing another reset after repeated 5g-1 drops to my RT-ac5300 in bridge mode (which seems to be mostly working again but only if manually navigating to the dhcp server page and disabling...
  22. Sticky: Anyone else getting strange entries in the log? ...

    Anyone else getting strange entries in the log? Getting this roughly every 20 minutes:

    Dec 17 12:38:34 kernel: pgd = ffffffc026e9d000
    Dec 17 12:38:34 kernel: [00000000] *pgd=000000002c6de003,...
  23. Sticky: Did an initialize reset after flashing new...

    Did an initialize reset after flashing new firmware, initial setup gui is back to being extremely slow on wired connections. After five minutes, I finally rebooted the router and connected to...
  24. Good luck. Honestly, I think you would do better...

    Good luck. Honestly, I think you would do better with the RT-AX88u. Only a few minor issues with it at release and Merlin is working on firmware for it.
  25. No connection problems on 2.4 or 5.You should...

    No connection problems on 2.4 or 5.You should probably do this regardless but Just make sure any bridges, repeaters, and I assume aimesh nodes, have a static ip. I have noticed that my bridges will...
Results 1 to 25 of 59
Page 1 of 3 1 2 3