Search:

OMFG please do not post here if you have no knowledge or understanding about BIOS's LMAO

Never seen that it could be a fake that CPU doesn't look new, it could be re-stemmed xeon or something what does the bottom side look like?

Yes if it boots with another CPU and the boards bios has been updated the CPU is dead.

CODE 00 is ether corrupt bios or dead CPU sadly I would recommend taking your XE back, on a side note the 9xxx and even 7xxx are only 6gen architecture so you wasted your time waiting, the 9980XE is...

Its hard to tell because this CPU has more cores and uses more power, but I don't think my temps are to good.

Those pads have been around for years there not as good as paste.


What are your VRM temps like? i redid my CPU temps didn't change there the same after new LM and paste, locked to 1.2v i can't...

I'm hopping its just the LM or the thermal paste the next time i redo the paste ill be applying it to only the bottom of the mono block rather than the IHS.

So I order one of these and installed it on my XE and temps are pretty bad, I've order some new LM to retry next weekend as one core seems really good the others aren't so much, these temps are from...

Seems reinstalling Intel turbo boost fixed this issue O_o

Get your Turbo boost audio driver lol

https://i.gyazo.com/3369cde681c58abbb8b5e563df00688d.png

Remove

There's a reason they sell LC on there site and not grizzly.

There is no difference in temps from Coollaboratory Ultra Vs Grizzly but Grizzly isn't good to use with copper.

Have you tried BIOS 2? code 00 can also mean the bios chip is corrupted even flash back wont reflash the bad sectors only a bios programmer can.

Never use LM Grizzly with copper end of story lol, I'm showing you imperfections.

Seems to be it does? I have no issue with the copper version also people seem to use the wrong LM which creates that issue people are seeing.

79585

Cool but it seems to have imperfections :confused: .

der8auer is a waste of space and full of ****.....

Direct die is better but the differences in temps are just from error in mounting the same with any mount, its not that the die isn't flat you should always try a few times to get the best temps if...

Maybe learn to read might help yeah? :p, my 7940X needs 1.3v for 4.7Ghz it isn't the best clocker and my watercooling loop can't handle the heat, it all depends on your setup really.
79541


This...

for direct die your temps are not that much better than mine and that probably down to your WC setup not vs copper ihs vs direct die mate.

I told you that theres no nickel version lol.

It will probably be a stock IHS thats been lapped.

Where is the link to this nickel version?

Temps are still good with the copper IHS just changed out my fans and moved to EK RGBs for the front and back and 2x EK 3000 RPMs for the two.

79454