Search:

If you use the DIMM.2 module, the primary PCIe slot will run at 8X. It doesn't impact performance by much.

There are 16 CPU PCIe lanes. If you mount two X4 drives on the DIMM.2 module, it will occupy eight of them, leaving eight PCIe lanes for other cards. If you mount a further two X4 M.2 drives on a...

Take the board out of the chassis, set it up on a non-conductive surface, and then check if the graphics card works correctly.

Welcome back :)

Not for sale in North America. That may change at some point, though.

You’re welcome.

There are only 16 CPU PCIe lanes. Multiplexing those lanes would eat into the available bandwidth for all associated devices. The reason to use primary lanes for storage is to get around the...

No immediate plans for this. Doesn’t mean it won’t happen at all, though.

DIMM.2 is primarily for users that want to harness the full bandwidth of high-perf drives in RAID configurations. If you don’t care for that, use the M.2 slots under the heatsink. They are routed via...

I'll have a word with the product managers.

Hi,

The Sabre 9023P DAC outputs are for the front panel only. The rear outputs use the codec's internal amp. The front output is capable of swinging enough voltage to drive into 600 Ohm loads, so...

No plans to allow shutoff temp control yet, at least for anything current and upcoming. It’s something that has been considered, but also needs to be handled properly. Need to get a lot of other...

Intel owns the patent, so unless AMD comes up with a way around it, don’t expect it.

Get ready to pen another OC guide.. ;)

Prolly a typo. That list I posted is official.

Yes, it's unfortunately limited to this because it's not aware of whether OC related parameters have been changed on the system, so as a safeguard, it needs to be manually enabled after each restart....

I'll see if I can do that on the Elite pedals. Think the driver is somewhat different.

Let me know if you manage to find out if any of the USB devices are impacting compatibility. Might be able...

May be unrelated, but on my X299 setup, I have a set of Fanatec pedals that I frequently have to plug back in for them to work correctly. Seems to be some strange incompatibility that I think is more...

Support list:




Z370
BIOS VERSION


ROG MAXIMUS X FORMULA

As my last post stated, you can't dial this out completely. The only options are those you've explored already.

You can't lock in Adaptive completely on this platform. Just the way Intel is handling things. Nothing we can do about it. Run manual Vcore or tune adaptive for stability with the apps you use on a...

OS files and necessary being loaded, I suspect. The delay is likely a good thing; if the system starts polling too soon, it can cause access errors.

If there's no option, you can't. If that's the case, submit your feedback via the Google sheet linked in the first post of this thread.

I’d submit that into the google sheet, Arne. I agree, all of this stuff should be optional, not mandatory.

Any other info that will help replication? Anything specific you need to do for it to manifest?